Jaspers Holders 30B

162

Vis oversættelse

Holder

Length: 30 cm
Load capacity: up to 15 kg (extendable with shelf reinforcement up to 40 kg load capacity - not included)
With stoppers and two-part tube clamps
Can be mounted anywhere without dismantling the stand
Material: Powder-coated aluminium
Colour: Black
Scope of delivery: 1 pair

30 30 dages-Money Back garanti

3 3 års Thomann garanti

Fås siden Februar 2007

Artikelnummer 109854

salgsenhed 1 stk

Type Of Keyboard Stand Extension

Colour Black

299 kr

Inkl. moms. Obs! Yderligere fragtomkostninger 60 kr

Forventet levering mellem mandag, 6.05. og tirsdag, 7.05.

Salgsrang

i Tilbehør til keyboardstativer

Kunder som så på dette produkt købte dette

Jaspers Monitor Holder 40B

485 kr

162 Kundebedømmelser

5 135 Kunder 4 21 Kunder 3 4 Kunder 2 1 Kunde 1 1 Kunde

4.8 / 5

stabilitet

forarbejdning

Retningslinjer for anmeldelser

64 Anmeldelser

Nice

thecopenhagen 24.05.2021

good when you tightened it, takes bit of time to setup..

Anmeld bedømmelse

Synes du at denne vurdering er forkert eller af en anden grund ikke læselig? Vær venlig at skrive i det følgende kommentarfelt hvorfor og hvis muligt din email-adresse, så vi kan give dig en tilbage melding til din kommentar.

It's your only option

LBC 25.09.2019

But it's a good one, all things considered

Anmeld bedømmelse

Vis oversættelse

Vis original

Der opstod en fejl. Prøv igen senere.

If you're reading this, you probably need these.

infindebula 14.09.2021

I think all the Jaspers stands already come with these holders, so their function should be no mystery.

My only gripe is the little hooks on the end - they are generally fine, but not quite long enough for certain keyboards. For example, the Akai AX60 has an angled lower chassis, so the hooks do not quite come up high enough to hold the keyboard in place. I own a few other vintage keyboards with a similar slope on the bottom, but I haven't tried them yet. I think the Korg DW series and Poly-800 may have similar trouble.

I was able to correct this by replacing the hooks with 1/4 x 3/4 inch aluminum bar stock. I cut the bar to about 65 mm in length, then drilled and countersunk a hole for the screw, and finally spray painted the pieces black. It was a lot of work, but it fixed the problem.

I'm rating these holders 5 stars for stability and quality, but only 4 total because they are not suitable for all keyboards, and Jaspers does not offer longer hooks for the end of the holders.

Anmeld bedømmelse

Vis oversættelse

Vis original

Der opstod en fejl. Prøv igen senere.

Simple and effective

The Professor 06.05.2020

These neat little equipment arms bolt on to your existing Jaspers keyboard stand so you can, uh, stand more keyboards. In my case I'm actually using them for a variety of other kit, like some of the heftier old drum machines, an Akai sampler or two, and the like; so I've got four pairs of these spanning one tier of a multi-tier stand. They work very well and the friction grips can be entirely opened, allowing you to attach them to the stand without disassembling it (which is a relief). Not exactly exciting, but very handy, and the build quality is excellent.

Anmeld bedømmelse

Læs alle anmeldelser

Jaspers Holders 30B

Holder

Kunder som så på dette produkt købte dette

162 Kundebedømmelser

Du skal være logget på, for at kunne vurdere et produkt.

64 Anmeldelser

Smart Navigator

Artikel historik

Handl og betal sikkert

Dine fordele

Service

Serveret med kærlighed!

Jaspers Holders 30B

Holder

Kunder som så på dette produkt købte dette

Tilbehør og matchende produkter

162 Kundebedømmelser

Du skal være logget på, for at kunne vurdere et produkt.

64 Anmeldelser

Sammenlign valgmuligheder

Smart Navigator