Doepfer A-142-4 Quad decay
- Single-Parameter: Decay
- Manual adjustment of the decay time for each unit in the range of about 2 ms to 2 s
- Setting the attack time by trimming potentiometer for each unit between about 1 ms and 15 ms is possible
- 1x LED per envelope output
- Normalized trigger inputs (1 -> 2 -> 3 -> 4)
1–2 af 4 tekstbedømmelser.Læs alle anmeldelser
four envelopes in the space of one!
|I alt|| |
In just 8HP Doepfer have squeezed in 4 decay envelopes! I rarely make a patch that doesn't use this module in one way or another. It can have a really sharp decay so can make snappy rhythmic sounds fantastically well. I often use it triggered by some different rhythms from a logic module to make drum machine sounds. In conjunction with the A-151 Sequential Switch you can make a varying decay for a filter cutoff, for example. Mix two together one triggered by a sequencer clock and the other by one step in the sequence and you can generate an accent.
Put the CV through a slew limiter and you can add an attack portion to the envelope too. Jumpers on the circuit give you options for looping too.
This is another module that you'll keep finding new ways to use. And it's got flashing LEDs to let you know what it's doing.
4 modulation sources in just 8hp
|I alt|| |
4x Envelope Single-Parameter: Decay, Manual adjustment of the decay time for each unit in the range of about 2 ms to 2 s, Setting the attack time by trimming potentiometer for each unit between...
Standard VCO for Modular System A-100Module A-110-1 (VCO) is a voltage controlled oscillator. The A-110-1 produces frequencies in a range of about 8 octaves, of which four waveforms are available...
Passive Multi-Port Distributor 8x Interconnected jacks, Sockets are divided into 2x quadruple groups; but can also be modified to an eight-multiple (soldering bridge on the circuit board), Width:...
Wasp Filter Special edition, Black front, Yellow knobs
ADSR Envelope Generator The module A-140 is a envelope generator and since it delivers control voltages, belongs to the modulation-modules. As soon as the ADSR is triggered at gate-input, it...
Doepfer A-111-2; High End VCO II / VCLFO; Width: 14 HP, Current: +70mA (+12V) / -50mA (-12V)
Doepfer A-180-3 Dual Buffered Multiples, dual buffered 1-in-3 multiple to copying/buffering of control and audio signals, Width: 4 TE / 4HP / 20.0 mm
Doepfer A-119 - external input/envelope follower; Width: 8HP / 40.3 mm; Depth: 45 mm (measured from the rear side of the front panel); Current: +30mA (+12V) / -20mA (-12V)
Doepfer A-138b - mixer with logarithmic potentiometers.
Frequency divider For clock/trigger/gate signals, Width: 4 TE/ 4 HP / 20 mm
DKK priser er vejl. priser
|Fås siden||juni 2012|
|i denne kategori||Placering 191|
|på thomann.de||Placering 38136|
- Doepfer Modulære systemer vises her
- Vis Modulære systemer i priser fra 90 € - 110 €
- til produktgruppe Modulære systemer
- til produktgruppe Synthesizere
- til produktgruppe Tangentinstrumenter
- Her er informationer til producenten Doepfer
- Doepfer Tangentinstrumenter vises detaljeret
- Printversion af denne side
Flere produkter fra Doepfer
|Betaling og sikkerhed||Butik||Sitemap||Kontakt & Service||Til vores groupies...|
Sikker betaling med Credit Card, Bank Transfer eller PayPal.