Conrad Götz ZA328E-106 Violin Tailpiece

Vis oversættelse

Tailpiece for Violins

French style with black saddle
Deep black ebony from certified wood sources
Expertly made
Edges and corners are trimmed
Length: 106 mm
Weight: 13 g
Due to being handmade dimensions may vary slightly
White Götz signet for products with a certified wood origin
Incl. tailgut for tailpiece

30 30 dages-Money Back garanti

3 3 års Thomann garanti

Fås siden Juni 2015

Artikelnummer 365614

salgsenhed 1 stk

Size 4/4

Material Ebony

4-strings Yes

5-strings No

ornamentation None

comes with tail gut Yes

90 kr

Inkl. moms. Obs! Yderligere fragtomkostninger 60 kr

Forventet levering mellem tirsdag, 7.05. og onsdag, 8.05.

Salgsrang

i Strengeholder til violin

Kunder som så på dette produkt købte dette

Conrad Götz ZA7483E-110 Violin Tailpiece

129 kr

14%

købt

Conrad Götz ZA328B-112 Violin Tailpiece

98 kr

10%

købt

Conrad Götz ZA328E-115 Violin Tailpiece

90 kr

købt

Conrad Götz ZA357-112 Violin Tailpiece

128 kr

8 Kundebedømmelser

5 4 Kunder 4 3 Kunder 3 0 Kunder 2 0 Kunder 1 1 Kunde

4.1 / 5

håndtering

forarbejdning

Retningslinjer for anmeldelser

7 Anmeldelser

Vis oversættelse

Vis original

Der opstod en fejl. Prøv igen senere.

Great! no need to say more

Lorin L. 29.04.2018

This is a very good quality tailpiece. It is 10,6 cm long with a high quality craftmanship.
This is also one of the smaller tailpieces available for 4/4 violin which also allows a lower pitch for the string length bridge-tailpiece. Personally, I prefer not to tune this part with open strings as some harmonics can sound harsh in some violins. The final result also depends a lot on your instrument.
While this dimension tends to work good with different violins, it really can make the difference on some violins, generally lighter ones.

The nylon tailgut that's included works quite good. In case, you can experiment with a kevlar one to see if the sound of your instrument can benefit from it although this operation is not for everyone.

Anmeld bedømmelse

Synes du at denne vurdering er forkert eller af en anden grund ikke læselig? Vær venlig at skrive i det følgende kommentarfelt hvorfor og hvis muligt din email-adresse, så vi kan give dig en tilbage melding til din kommentar.

Vis oversættelse

Vis original

Der opstod en fejl. Prøv igen senere.

Decent ebony tail piece

Korman 17.07.2020

This is a nicely made simple tail piece. The ebony used is a bit lighter than other harder denser ebonies. In fact, it is a bit lighter than the Tintul tailpiece, which is in between hard ebony and boxwood in terms of weight and density.

Personally I prefer the Conrad Götz ZA350-115 Violin Tailpiece, because the ebony is harder and more polished.

Anmeld bedømmelse

Vis oversættelse

Vis original

Der opstod en fejl. Prøv igen senere.

Nice tailpiece

Tom.K. 10.12.2023

Tailpiece should corespond with size of an instrument so this one is great if you have smaller violin. It is hard to find shorter as most producer will make 115mm as a standard lenght so great that Conrad Gotz offer them in different lenght. Good wood selection also.

Anmeld bedømmelse

Læs alle anmeldelser

Conrad Götz ZA328E-106 Violin Tailpiece

Tailpiece for Violins

Kunder som så på dette produkt købte dette

8 Kundebedømmelser

Du skal være logget på, for at kunne vurdere et produkt.

7 Anmeldelser

Smart Navigator

Artikel historik

Handl og betal sikkert

Dine fordele

Service

Serveret med kærlighed!

Conrad Götz ZA328E-106 Violin Tailpiece

Tailpiece for Violins

Kunder som så på dette produkt købte dette

Tilbehør og matchende produkter

8 Kundebedømmelser

Du skal være logget på, for at kunne vurdere et produkt.

7 Anmeldelser

Sammenlign valgmuligheder

Smart Navigator