To the page content

Swiff Audio WX502 Wireless System

4.7 out of 5 stars from 3 customer ratings ()

Wireless Transmitter and Receiver for Electric Guitar / Electric Bass

  • Carrier frequency: 5.8 GHz
  • Transmission range up to 50 metres
  • Latency < 2 ms
  • Audio frequency response: 20 Hz to 20 kHz
  • Built in lithium-ion batteries (USB charger included)
  • Battery life up to six hours
  • Dynamic range: 102 dB
  • Weight: 190 g
  • Colour: Black
  • Available since November 2024
  • Item number 602961
  • Sales Unit 1 piece(s)
98 €
All prices incl. VAT
In stock within 3-4 weeks
1

Lose the cables – keep the sound

The Swiff Audio WX502 Wireless System is the perfect add-on for guitarists who want to lose the cables – but keep the sound. This simple, effective set consists of nothing more than a transmitter, a receiver, and a charging cable. Despite this simplicity, the system transmits over the SHF 5.8GHz band, for a strong, stable, and uninterrupted signal – it's even encrypted. And with latency under 2ms, the audio itself stays crystal clear. Transmitter and receiver connect to source and PA through standard 6.3mm jacks, although the 6.3mm adapters on the WX502 can actually be screwed off to reveal 3.5mm jacks too – very practical. Each unit is powered by its integrated rechargeable battery: Fully charged, the system runs for up to six hours. With just a single multifunction button, plus an on/off switch, this compact, straightforward wireless setup gives guitarists the freedom to move around on stage without being tied down by cables.

Swiff Audio WX502 Wireless System

Between the axe and the mix

The Swiff Audio WX502 Wireless System can handle frequencies from 20Hz to 20kHz, so even the deepest bass comes through with plenty of punch. Both components feature a rotating jack, so they're flexible enough for use with almost any instrument. The transmitter plugs into a guitar and sends its signal to the receiver, which can be hooked up to any mixing desk. LEDs displays on both devices show the battery level, making it easy to see when a recharge is needed: The USB split cable the set ships with can charge both devices at once.

Swiff Audio WX502 Wireless System, Detail

Simple but expandable

This compact wireless system is aimed at guitarists looking for more freedom to move on stage – and a simple, intuitive solution to make it happen. With no extra controls, there's no complicated setup to worry about. Because it uses the very stable 5.8GHz frequency, up to ten units can be used on stage simultaneously. Similarly, a single Swiff Audio WX502 transmitter can also be configured to handle up to four receivers, each picking up a single channel. That means several players can share the same setup for a clear, organised signal flow. And with USB charging, the band won't even need batteries.

Swiff Audio WX502 Wireless System, Logo

About Swiff Audio

Swiff Audio Technology Co. Ltd. is based in Hong Kong and specialises in developing and manufacturing high-quality, intuitive wireless systems, backed by its more than 15 years of experience. Its product range includes wireless audio transmission systems, wireless amplifiers, tuners, and power supplies for effects pedals with adjustable voltage. All these products have proven their worth in countless settings – from stage and film sets to professional studios – and are aimed at musicians, performing artists, public speakers, and content creators.

Safe and secure signal

For a solid signal, a guitarist will need a clear, direct line of sight between the transmitter and receiver, with as few large obstacles as possible in the way. Both units should also be at least 1.5 metres away from larger metal objects like walls or scaffolding: Because of the built-in lithium batteries, they shouldn't be placed near heat sources either. If the system isn't going to be used for a while, users should make sure to unplug the charging cable. Depending on which mode a musician or sound tech runs the system on, the Swiff Audio WX502 can transmit for six hours on a full charge. And with a signal-to-noise ratio of over 85dB and a distortion level of under 0.05%, it delivers high-quality audio, which is of course the most important thing of all.

3 Customer ratings

4.7 / 5

handling

features

quality

3 Reviews

google translate de
Unfortunately there was an error. Please try again later.
T
tut, was es soll
T2s4e 19.05.2025
Ich habe mich für das das WX502 entschieden, weil es in 5.8 GHz funkt, relativ neu ist und keiner meiner Freunde dieses System besitzt. Ich hoffe damit Kanalsuchen vermeiden zu können.
Vorweg, es tut, was es soll, nämlich ein altes 2.4 GHz System zu ersetzen. Die Kritikpunkte haben mich nicht davon abgehalten, es zu behalten.
Besonderheiten
Den abschraubbaren Klinkenadapter fand ich erst überflüssig, habe ihn dann aber doch mal für den schnellen Anschluss eines Radios benutzt.
Man kann einen Transmitter mit 4 Receivern verbinden, brauch ich aber nicht.
Fehler in der Beschreibung
1. Auf den Bildern werden Die Dioden an der Seite grün dargestellt. Sie sind aber weiß.
2. Der Ladeanschluss ist nicht USB-C sondern Micro-USB
Kritikpunkte
1. Die Anleitung ist in Chinesisch und Englisch. Sie ist sehr klein und es steht nicht alles drin. Es fehlt die Beschreibung der Kanalanzeige. Man sollte sie dennoch lesen und aufheben.
2. Der Einschalter macht einen klapprigen Eindruck und hat keine Bezeichnung für on/off. Das ist nur relevant, wenn der Akku leer ist.
3. Beim Einschalten ist immer Kanal 1 aktiv. Wenn man nur ein System hat, ist das auch kein Problem.
4. Aufladen, leider kein USB-C, geht aber dennoch schnell.
Die Bedienung
An der Seite gibt es 4 weiße Leuchtdioden. Man muss aber genau hinschauen, weil sie sich überstrahlen.
Auf der Unterseite ist der „Multifunction button“. Dieser wird an anderer Stelle der Bedienungsanleitung als „front button“ bezeichnet. Dieser kann grün oder rot leuchten oder blinken.
Funktionen am Transmitter
Nach dem Einschalten laufen die 4 weißen Dioden durch. Dann wird der Ladezustand durch kurzes Aufleuchten von 1-4 Dioden angezeigt.
Der „Multifunction button“ blinkt grün und leuchtet dauerhaft grün, wenn die Verbindung steht.
1 x Klick - Frequenzwechsel, an der Seite leuchtet eine der 4 Dioden sehr kurz auf.
Vermutung: Nach dem Einschalten ist Kanal1 aktiv. Beim 1. Klick leuchtet die Diode „1“ auf. Sie zeigt den aktiven Kanal1 an und es wird auf Kanal 2 geschaltet, und so weiter.
2 x Klick - Die 4 weißen Dioden zeigen kurz den Ladezustand an.
Langer Klick - Reset und neue Kopplung
Am Receiver
1 x Klick - keine Funktion
2 x Klick - Die 4 Dioden zeigen den Ladezustand an.
Langer Klick - blinkt rot, Übertragung läuft weiter, Funktion unbekannt, wird vielleicht für die Kopplung zu mehreren Receivern benutzt.
Laufzeit und Laden
Der Transmitter verliert pro Stunde einen der 4 Balken und hält mehr als 4 Stunden.
Der Receiver hält wie erwartet länger durch. Das Laden dauert ca. eine Stunde.
Reichweite
Die Verbindung ist stabil. Die Reichweite kann ich nicht beurteilen.
Ob die beiden verbunden sind sieht man nur am Receiver. Der Transmitter leuchtet immer grün.
handling
features
quality
6
0
Report

Report

google translate it
Unfortunately there was an error. Please try again later.
AS
PRODOTTO EFFICIENTE
Artist Spector 13.10.2025
Dopo aver usato sistemi wireless con la classica centralina, ero alla ricerca di qualcosa di meno ingombrante ed immediato. Scelta azzeccata. Per ora, testato solo in sala prove. A breve, anche live. Comunque, acquisto consigliato.
handling
features
quality
0
0
Report

Report

google translate de
Unfortunately there was an error. Please try again later.
G
Passt
Guitarman79 19.11.2025
Netto Spielzeit ca. 4,5 Stunden
in den Unterbrechungen hab ich die zwei Teile aber ausgeschalten…
Latenz nicht spürbar!
Für meine Zwecke passt das System…
Verarbeitung ist gut…
handling
features
quality
0
0
Report

Report