Doepfer A-132-4 VCA/Mixer
Quad Exponential VCA / MixerModule A-132-4 contains four identical voltage-controlled amplifiers (VCA) with exponential normalization. Each VCA has two control voltage inputs (CV1, CV2), a signal input (In) and a signal output (Out). The control voltage inputs CV1.1 and the signal inputs In1 can be bridged with the control voltage input CV2.1 via internal jumpers and with the signal input In2. This circuit is also available between amplifiers 2 and 3 as well as between amplifiers 3 and 4. If this circuit is not desired, the jumpers must be removed. In addition, the sum of all four outputs is available (lower left socket with the sum symbol). Therefore, amplifier 4 has only one control voltage input (CV4.1). If necessary, this socket can be bridged as a control voltage input 2. Then the sum signal is no longer available. For each VCA output, a jumper is available which determines whether the output signal of the corresponding VCA is added to the sum signal. By default, all four jumpers are set (All four VCA output signals are added). By removing one or more of the jumpers, you can select which VCA output is added to the sum. The bridges can also be replaced by switches.
- Power requirements: 30 mA (12 V) / -20 mA (-12V)
- Width: 6TE / 30.1 mm
- Depth: 60 mm (measured from the rear of the front plate)
|Empty Rack, Or Housing||No|
Further Doepfer items
Offers include 21% Belgium VAT and are valid as long as stocks last. Shipping costs to Belgium are 2,50 EUR, free shipping on orders above 49 EUR. Please click here for international Shipping rates. We do not accept liability for typographical errors or inaccurate information of any kind. *RRP = manufacturer's / distributor's recommended retail price in Germany