Doepfer A-119

External Input / Envelope Follower

Module A-119 is used to integrate external audio signals into the system A-100, and includes the components pre-amplifiers, envelope follower and a comparator. The preamplifier has two inputs: the unbalanced input with a gain factor of 0 ... 20 is mainly used for line-level signals, while the balanced input has a gain factor of 0 ... 500 for the integration of low-level signals (microphone , Electric guitar).

The envelope follower generates an envelope at its output, corresponding to the signal profile of the external audio signal. The comparator generates a gate signal corresponding to the level of an adjustable trigger threshold. Three LEDs are used to control the amplification (overdrive), the envelope and the gate signal.

  • Width: 8HP / 40.3 mm
  • Depth: 45 mm (measured from the rear of the front plate)
  • Power requirements: 30 mA (12 V) / -20 mA (-12V)

Further Information

Width 8 TE / HP

These are other customers' choices:

Customers who looked at this item have bought these:

Doepfer A-119
51% bought this exact product
Doepfer A-119
Available immediately
Available immediately

This item is in stock and can be dispatched immediately.

Standard Delivery Times
68 € Add to Basket
Expert Sleepers Disting mk4
8% bought Expert Sleepers Disting mk4 155 €
Doepfer A-138D
7% bought Doepfer A-138D 68 €
Doepfer A-139-2 Headphone Amplifier
6% bought Doepfer A-139-2 Headphone Amplifier 51 €
Erica Synths Pico Output
3% bought Erica Synths Pico Output 96 €
Our most popular Interface Modules
43 Customer Ratings:
  • 5
  • 4
  • 3
  • 2
  • 1
4.6 / 5.0
  • handling
  • features
  • quality
22 written ratings Read all reviews
Total
more than just an input
23.10.2016
I initially bought this module to bring microphones and guitars up to eurorack levels. But I have now discovered that this module offers so much more.

For starters the mini mult on the audio out is most welcome as I very often want to route the signal to more than one place (saving my multiples for other signals in the patch). The envelope follower is also surprisingly useful routed to an amp, filter or to control an aspect of a wave multiplier or vocoder are my most common choices. I can derive interesting rhythms from an external drum machine and use the gate threshold as a performance control to change the rhythm. The LEDs also offer useful indication of the overdrive, envelope follower and gates (and we all like flashing lights!)

There is only one slight criticism I would have, the module could have fitted into 6HP for this reason only I have knocked off one star in features. (I'm trying to build my system into a small case so every HP counts!)

All in all an excellent, versatile and most useful module. I use it in far more of my patches than I ever expected to.
Helpful · Not helpful · Report
Report rating…

Do you believe this rating to be inaccurate or unacceptable for some reason?

Send report
Total
handling
features
quality
Love these thing
Harry Turner, 01.11.2019
Sockets are good.
Plenty of gain
Works well for getting Hi-Z signals in.
Fun module to have in the case
Helpful · Not helpful · Report
Report rating…

Do you believe this rating to be inaccurate or unacceptable for some reason?

Send report
Show variations of this product
Doepfer A-119
(43)
Doepfer A-119

External Input / Envelope Follower Module A-119 is used to integrate external audio signals into the system A-100, and includes the components pre-amplifiers, envelope follower and a comparator....

  • Width: 8 TE / HP
  • Module: Yes
  • Empty Rack, Or Housing: No
  • Basic System: No
  • Accessories: No
Doepfer A-124 Wasp Filter SE
(46)
Doepfer A-124 Wasp Filter SE

Wasp Filter Special edition, Special 12 dB multimode filter, Circuit technology of the "EDP Wasp", Black front, Yellow pot caps, Width: 8 HP, Depth: 45 mm, Power requirements: +30 mA (+12 V)/-10 mA...

  • Width: 8 TE / HP
  • Module: Yes
  • Empty Rack, Or Housing: No
  • Basic System: No
  • Accessories: No
Doepfer A-138s Mini Stereo Mixer
(24)
Doepfer A-138s Mini Stereo Mixer

Mini Stereo Mixer 4-in-2 mix module in Eurorack format, Four inputs with attenuator and pan control, plus two 3.5 mm mini jack outputs, Width: 8 HP, Depth: 30 mm, Power requirements: +10 mA (+12 V)...

  • Modul Type: Stereo
  • Module: Yes
  • Empty Rack, Or Housing: No
  • Width: 8 TE / HP
  • Basic System: No
  • Accessories: No
Doepfer A-180-2 Multiples
(71)
Doepfer A-180-2 Multiples

Passive Multi-Port Distributor 8x Interconnected jacks, Sockets are divided into 2x quadruple groups; but can also be modified to an eight-multiple (soldering bridge on the circuit board), Width:...

  • Width: 2 TE / HP
  • Module: Yes
  • Empty Rack, Or Housing: No
  • Basic System: No
  • Accessories: No
Doepfer A-160-2 Clock Divider II
(16)
Doepfer A-160-2 Clock Divider II

Frequency Divider For clock/trigger/gate signals, Width: 4 TE/ 4 HP / 20 mm

  • Width: 4 TE / HP
  • Module: Yes
  • Empty Rack, Or Housing: No
  • Basic System: No
  • Accessories: No
Doepfer A-180-3 Dual Buffered Multiple
(22)
Doepfer A-180-3 Dual Buffered Multiple

Synthesizer module Double buffered 1-in-3 multiple, For buffering and duplication of CV and audio signals, Width: 4 TE / 4HP / 20.0 mm

  • Width: 4 TE / HP
  • Module: Yes
  • Empty Rack, Or Housing: No
  • Basic System: No
  • Accessories: No
Doepfer A-148 Dual Sample And Hold
(34)
Doepfer A-148 Dual Sample And Hold

Euro Rack Module Dual Sample & Hold, Two separate sample/hold circuits, Euro rack format, Power requirements: +20 mA (+12V) / -20 mA (-12V), Width: 4 HP / 20.0 mm, Depth: 30 mm (measured from the...

  • Width: 4 TE / HP
  • Module: Yes
  • Empty Rack, Or Housing: No
  • Basic System: No
  • Accessories: No
Doepfer A-180-9
(6)
Doepfer A-180-9
to the product
118 €

Multicore Module Ideal for connecting multiple systems or housings, Up to 14 signals can be transmitted via common network cables (RJ45), Width: 2 x 4 HP, Depth: 25 mm, Power requirement: +0 mA...

  • Switch Modul: No
  • Width: 4 TE / HP
  • CV-Editor/VC-Processor: No
  • Tools: Yes
Doepfer A-137-1 Wave Multiplier I
(15)
Doepfer A-137-1 Wave Multiplier I
to the product
118 €

Wave multiplier A-137-1 is a voltage controlled waveform multiplier. The basic idea of a wave multiplier is to multiply the waveform of an incoming audio signal (e.g. triangle/sinus/sawtooth of a...

  • Width: 14 TE / HP
  • Module: Yes
  • Empty Rack, Or Housing: No
  • Basic System: No
  • Accessories: No
Doepfer A-138M
(11)
Doepfer A-138M
to the product
134 €

Matrix Mixer With 4 rows and 4 columns, Unipolar / Bipolar mode switchable on each column, Suitable for both control voltage and audio, Width: 20 HP, Depth: 20 mm, Power requirements: +30 mA (+12...

  • Modul Type: Mono
  • Module: Yes
  • Empty Rack, Or Housing: No
  • Width: 20 TE / HP
  • Basic System: No
  • Accessories: No
Vermona Modular TAI-4
(8)
Vermona Modular TAI-4
to the product
285 €

Audio Interface Module for Eurorack Modular System Two balanced input and output channels (1 jack each and 1 XLR), Three-stage switchable input and output volume 0 / -6 / -12 dB and 0/6/12 dB,...

  • Width: 14 TE / HP
  • Module: Yes
  • Empty Rack, Or Housing: No
  • Basic System: No
  • Accessories: No
68 €
Free shipping incl. VAT
Available immediately
Available immediately

This item is in stock and can be dispatched immediately.

Standard Delivery Times
Share This Product
Your Contacts
gb
Phone: +49-9546-9223-30
FAX: +49-9546-922328
Offers include 21% Belgium VAT and are valid as long as stocks last. Shipping costs to Belgium are 2,50 EUR, free shipping on orders above 49 EUR. Please click here for international Shipping rates. We do not accept liability for typographical errors or inaccurate information of any kind. *RRP = manufacturer's / distributor's recommended retail price in Germany
(15)
Recently Viewed
Behringer Pro-1

Analogue Synthesiser Dual VCO design based on CEM3340, Sawtooth and pulse waveform for VCO A, Sawtooth, Triangle and Pulse waveform for VCO B, Pulse Width Modulation, Noise generator, 24 dB low-pass filter with resonance, 2 ADSR envelopes for VCF...

Recently Viewed
Electro Harmonix Ram's Head Big Muff Fuzz

Effect Pedal for Electric Guitar & Bass Fuzz, A faithful reproduction of the popular 1973 V2 Violet Ram's Head Big Muff Pi sound, Controls: Volume, Tone, Sustain, True bypass, LED: Effect on, Footswitch: Effect bypass, Input: 6.3 mm jack,...

Recently Viewed
Boss Katana 100 Head MKII

Boss Katana 100 Head MKII, electric guitar head, 100 Watts, 5 amp types: Clean, Crunch, Lead, Brown & Acoustic, newly voiced variations for each, Five independent effects sections (Booster, Mod, FX, Delay, and Reverb), with three selectable variations in each,...

Recently Viewed
Harley Benton ST-20HSS SBK Standard Series

Electric guitar Body: Lime tree, Screwed neck: Maple, Fretboard: Amaranth, DOT fretboard inlays, Neck profile: Modern "C", Fretboard radius: 350 mm, Scale: 648 mm, Nut width: 42 mm, Double-action truss rod, 22 Frets, Pickups: 1 Humbucker (bridge) and 2...

Recently Viewed
Behringer Airplay Guitar ULG10

2.4 GHz Wireless System for Guitar 4 Channels, Plug & Play, Ultra-low latency of approx. 5 ms, Built-in 750 mAh lithium battery with up to 6.5 hours life, Maximum range: 30 m, Frequency response: 20-16,0000 Hz, Auto Sleep /...

Recently Viewed
Native Instruments Traktor S3

4-Channel DJ Controller and Audio Interface Sample Rate / Resolution: 24-Bit / 44.1 / 48 kHz, 2 Large 14 cm precision jog wheels, Illuminated jog-wheel rings for visual feedback, including deck selection, 16 RGB pads for triggering hot cues,...

Recently Viewed
Steinberg UR816C

16x16 USB 3.0 Audio Interface with iPad Connectivity 32-Bit integer / 192 kHz, 8 Class-A D-PRE mic preamp with +48 V phantom power, Latency-free DSP-assisted monitoring with REV-X Reverb, Channel Strip and Guitar Amp Classics - also included as...

(1)
Recently Viewed
Toontrack EZX Death Metal

Toontrack EZX Death Metal (ESD); expansion pack for Toontrack EZ Drummer 2 (item 399369) / Superior Drummer 3 (item 419735); produced and recorded by Mark Lewis at the Sonic Ranch in Tornillo / Texas; contains 2 complete drum sets, optimized...

Recently Viewed
Meinl Mike Johnston Groove Cowbell

Meinl Mike Johnston Signature Groove Cowbell, MJGB, vintage steel finish, optimized for using in acoustic drum setups, including 2 magnetic dampers for changing the cowbells decay,

Recently Viewed
Teenage Engineering PO-137 rick & morty

Teenage Engineering PO-137 rick & morty; vocal synthesizer and sampler; integrated microphone for sampling; 120 seconds sampling time; 8 voice characters; 8 effects; parameter lock (2 parameters per sound); 16-step sequencer; 16 patterns; "Lock Tab" write protection for patterns; transpose...

Recently Viewed
Boss DD-3T Digital Delay

Effect Pedal for Electric Guitar Digital delay, New function - Delay tempi adjustable via the onboard switch or external footswitch, True bypass, Controls: Level, Feedback, Time, Mode, Effect on LED, Footswitch: Effect Bypass, Current consumption: 45 mA, Power supply...

(2)
Recently Viewed
Universal Audio Apollo Twin X Duo

10 x 6 Thunderbolt 3 Audio Interface With UAD-2 DUO processor for almost latency-free recordings via plug-in emulations of classic compressors, EQs, tape machines, microphone preamps and guitar amplifiers, 24 Bit / 192 kHz AD / DA converter, 2...

Give Feedback
Feedback Found an error or want to give us feedback about this page?

We're looking forward to hearing from you and aim to solve any problems as soon as we can.