Tama CB90FH Felt Beater Head

115

Beater Head

  • For Iron Cobra bass drum pedals
  • Surface: Felt
Disponível desde Fevereiro 2001
número de artigo 146286
unidade de venda 1 peça(s)
Type Beater
€ 18,30
IVA incluído, € 20 de portes de envio adicionais
Em stock
Em stock

Este produto encontra-se em stock e pode ser enviado imediatamente.

Informações sobre o envio
Envio previsto até Terça, 30.04.
1

115 Avaliações de clientes

4.5 / 5

Terá de iniciar sessão para classificar produtos.

Nota: De forma a prevenir que as classificações sejam baseadas em boatos, conhecimento limitado ou má publicidade nós apenas permitimos classificações provenientes de clientes no nosso website, que tenham adquirido o equipamento através de nós.

Após iniciar sessão poderá encontrar todos os produtos que poderá classificar em classificar produtos no centro de clientes.

acabamento

28 Críticas

google translate gb
Infelizmente ocorreu um erro. Por favor tente novamente mais tarde.
JS
Perfect beater for my purpose
Johan SpinOff 28.12.2019
I bought this as a replacement beater head for my Tama Speedcobra. The beater head that was supplied with it was too hard for my taste.

With this beater head attached my kick drum just sounds the way I want it.
It's a very easy replacement. Angle can be adjusted, ... It packs more features than I would ever have expected this kind of product could have or need!
acabamento
0
0
Reportar a crítica

Reportar a crítica

google translate gb
Infelizmente ocorreu um erro. Por favor tente novamente mais tarde.
j
Simple replacement for worn-out Iron Cobra beater heads.
jonathanhoey 23.06.2014
I bought a pair of these beater heads to replace the worn-out original beater heads that came with my Iron Cobras. (I had played almost 100 gigs with them, as well as hundreds of hours of rehearsals, so I have nothing bad to say about their longevity!)

Fitting them is very straightforward, requiring only a drum key. Loosen the single bolt, turn the head through 180 degrees (so the felt side faces the back) and lift off. Pop the new one on (also upside down and backwards), rotate until it faces the front, and tighten the bolt. It takes seconds.

Note that this package does not include the shafts - this item is the beater *head* only. So it's only suitable as a replacement if you already have Iron Cobra beaters with the cylindrical T-bar at the top. If you're replacing a different model of beater, then the item you need is the CB90F, which includes the shaft.
acabamento
0
0
Reportar a crítica

Reportar a crítica

google translate gb
Infelizmente ocorreu um erro. Por favor tente novamente mais tarde.
A
The felt does ware away
Anónimo 17.09.2015
This is a great beater head, and is the beater head of my choice, as it feels great to play with, gives a good response from my pedal and a nice sound from the bass drum. I have never had any trouble with the connection of this beater head, it fits to my iron cobra pedal as it should and has never fallen out of place.
The only trouble i have found with this beater head, is only to be expected, but I am now finding myself having to replace the head only after a short amount of time, as the felt wares away sometimes leaving sharp bits of glue that then can damage the bass drum head, if it is not changed in time.
acabamento
0
0
Reportar a crítica

Reportar a crítica

google translate gb
Infelizmente ocorreu um erro. Por favor tente novamente mais tarde.
M
Best replacement
Mrtnkrz 21.06.2021
Great beater, original cobra sound, construction and feel. Less durable than the rubber version but sounds more balanced to my ears
acabamento
0
0
Reportar a crítica

Reportar a crítica