Video recording card and audio interface
- Combines video recording, audio recording and controller
- 4k/30 recording and 4k/60 passthrough
- Supports VRR
- Integrated audio interface
- 48V phantom power switchable
- Line input: combo jack XLR / 6.3 mm jack
- Headset jack: 3.5 mm jack
- Headphone jack with own volume control: 6.3 mm jack
- 1 HDMI In and 1 HDMI Thru
- 2 USB-C ports for dual-PC setup
- Built-in wireless receiver for Wireless GO II or Wireless ME transmitter
- Gain control with integrated source selection switch
- Built-in DSP with Aphex high-pass filter, noise gate and compressor
- Mic and Camera On/Off switch with status LED
- Four programmable pads for triggering sounds, effects and MIDI messages
- Two bank change buttons for a total of 8 commands
- 3/8" Thread for tripod or microphone arm mounting
- Dimensions: 144 x 122 x 50 mm
- Weight: 380 g
- Includes power supply, mains cable and 2m USB cable (type C to C)
All-in-one solution for streamers
The RØDE X Streamer X is an all-in-one solution for creating audio and video data streams and, as an interface, is therefore primarily designed for streaming applications. In addition to an XLR/jack combo socket for connecting a microphone, the back of the device is also fitted with an HDMI input and connections for headphones and a headset. The RØDE X Streamer X also features an integrated wireless receiver, which can be used to run the manufacturer’s optional Wireless GO II and Wireless ME radio links. Samples can be played via the four pads on the user interface, which are stored in the 2GB audio memory. In summary, the features of the RØDE X Streamer X provide content creators with an intuitive interface for successful streaming.
![](http://img.youtube.com/vi/9hWqS_FuQzg/0.jpg)
![Rode X Streamer X audio video interface](http://a.storyblok.com/f/49568/3094x3094/7e0b4ed2a0/hauptbild_tps_2866_567844_0_mai70058-567844n.jpg/m/1600x0/filters:quality(80):format(jpeg))
Intuitive operation
The interface of the RØDE X Streamer X works with just a small number of controls, making its operation particularly intuitive. The two encoders can be used to control the volume of the connected microphone and headphones or headset, connections for which are located on the back of the device. The XLR/jack combo socket allows both microphones and instruments to be connected, making an impromptu live performance possible during the stream. Phantom power for condenser microphones can be activated using the P48 button, and the channel is muted for three seconds after this button is pressed to automatically avoid noise interference in the stream. The HDMI input supports a video resolution of up to 4K60 HDR as well as VRR. To the left of the HDMI input is a "thru" output, which allows the video signal to be transmitted without latency.
![Back of the Rode X Streamer X with connections](http://a.storyblok.com/f/49568/2738x2738/6662bc67d2/tps_2866_567844_1_mai70032-567844n.jpg/m/1600x0/filters:quality(80):format(jpeg))
For successful video streams
The RØDE X Streamer X is aimed at all streamers who are looking for a compact solution that will allow them to get their content online easily. The beauty of this interface lies in its particularly simplistic operation. Low-noise vocals are ensured by the high-gain Revolution Preamp and APHEX audio processing, with the latter also enabling the application of effects to all input signals via the RØDE Central software when the interface is connected to a computer. The RØDE X Streamer X is powered via USB ports 1 and 3A, with the latter also being suitable for standalone use. A microphone, headset, or wireless microphone from the manufacturer can be connected for signal transmission, and users can select between audio and HDMI streams if the interface is connected to a computer.
![Rode X Streamer X potentiometers](http://a.storyblok.com/f/49568/2437x2437/a42f2b55b2/tps_2866_567844_0_mai69983-567844n.jpg/m/1600x0/filters:quality(80):format(jpeg))
About Rode
Founded in Sydney, Australia in 1990, Rode is a specialist in high-quality studio microphones. With its very first in-house, completely Australian-built model, the NT2 large-diaphragm microphone, the company created a classic which is still produced in its current and enhanced version, the NT2-A. An extensive range of studio and live microphones has also been added, regularly updated, and expanded over the years. These new additions include a variety of professional microphones which are designed for video and mobile applications and can be connected directly to SLR cameras or smartphones.
Individual pad configuration
The pads on the RØDE X Streamer X can be used not only to trigger samples but also to activate effects for the microphone signal and send commands for the mixer or even MIDI data, and the arrow keys allow the user to switch between the two banks of pads. If connected to a computer, the RØDE X Streamer X can be switched to presentation mode using the RØDE Central software, allowing it to take over the commands of the arrow keys on the keyboard. In addition to the four pads, the RØDE X Streamer X user interface has a button for muting the connected microphone and deactivating the video stream. Users will therefore have a wealth of functions at their disposal, giving them full control over their streams.