Showtec NET-2/3 Pocket

69

Network Router

The Showtec NET-2/3 Pocket and NET-2/5 Pocket are state-of-the-art network routers that transform Artnet and SACN data into DMX-512 signals and vice versa. Power can be supplied via PoE and thus without the 12V power adapter. A maximum of 1024 channels can be transmitted via a simple CAT5 cable. All settings can be made with the clear menu on the graphic display with the buttons on the front.

Connections:

  • Network: RJ45
  • DMX: 2 x XLR 3-pin
  • Supported protocols: ArtNET, sACN, TCP / IPv4, DMX-512A
  • Dimensions: 67 x 115 x 44 mm
  • Power supply: 12 V DC, 500 mA (mains adapter included)
  • Power consumption: max. 6 W
  • Operating temperature: 0 to + 40° C
  • Weight: 335 g
Myynnissä vuodesta Heinäkuu 2019
Tuotenumero 470298
Myyntierä 1 kappaletta
Type Ethernet-Interface
Type of construction Desktop
Connection for PC/Ethernet RJ45
Universes (Outputs) 2
DMX-Output 3-pole XLR female
DMX-Input 3-pole XLR female
RDM-capable No
Internal memory No
185 €
Kaikki hinnat sis. ALV:n
Varastossa
Varastossa

Tuotetta on varastossa ja se voidaan lähettää heti.

Tietoa lähetyksestä
llmainen toimitus. Arvioitu toimituspäivä Maanantai, 6.05. ja Tiistai, 7.05. välillä.
1

69 Asiakkaiden arviot

4.9 / 5

Sinun pitää kirjatua sisään, jotta voit arvostella tuotteita.

Huomio: jotta vältymme kuulopuheisiin, epätäydelliseen tietoon tai mainontaan perustuvia arvosteluja, niitä saa tehdä vain asiakas, joka on tuotteen meiltä ostanut.

Sisäänkirjautumisen jälkeen löydät kaikki arvosteltavat tuotteet kohdasta “Arvostele tuotteita” asiakastililtäsi.

Ominaisuudet

Työnjälki

48 Arvostelut

ST
Sturdy, easy to connect and compact
Sakari T. 27.02.2023
I bought this handy little router to control our lights during the show via the Photon2 app on one of our iPads. The connection to the network was very nearly automatic. This DMX interface is connected to the same network as our X32 -mixer in our live setup so I can seamlessly switch between monitor mix and lights.

The build quality is excellent, with rugged metal housing and a smallish, but clear display.

I would recommend this to everyone interested in easily connecting lights to a computer or iPad for lighting control. A great product!
Ominaisuudet
Työnjälki
0
0
Raportoi ongelmasta

Raportoi ongelmasta

J
Janatuinen 17.01.2020
Käytän tätä ohjatessani valoja IPadillä. Vähäisellä verkko-osaamisella luin yleisiä ohjeita netistä ja sain tämän toimimaan kivuttomasti. Laitteen omat ohjeet esittelevät vain laitteen ominaisuuksia ja käyttöä. Näiden lisäksi pitää opetella myös vähän sitä miten tällaiset verkot rakennetaan, IP-osoitteet jne. Kilpailijoihin verrattuna halvempi tuote mutta tekee kevyessä LED-valojen ohjaamisessa sen minkä kalliimmatkin tuotteet.
Ominaisuudet
Työnjälki
0
0
Raportoi ongelmasta

Raportoi ongelmasta

google translate gb
Valitettavasti tapahtui virhe. Ole hyvä ja yritä uudelleen.
h
A perfect solution to a problem I didnt know I had!
heyimdan-dan 03.08.2022
I use this Showtec device as an Art-Net controller from my PC at the FOH end of events, transmitting data to the stage. The software I use (DMX control 2.12) quickly recognises the device on the network despite going through two network switches and a router first. Using the Showtec to output DMX over IP means less cables to run. I can send all sorts of remote data over a single cable making set up times much quicker. This has been worth every penny.
Ominaisuudet
Työnjälki
3
0
Raportoi ongelmasta

Raportoi ongelmasta

google translate gb
Valitettavasti tapahtui virhe. Ole hyvä ja yritä uudelleen.
a
Does all that is needed, perfect little device
arnask 04.10.2021
I control DMX devices using iPad and Light Rider app, so i needed to buy expensive license (In-App Purchase to Unlock Art-Net - $130), but for me its all good. Previously used MyDMX Go, but wanted to get rid of wireless communications. If you need stable, wired device - its there.
Ominaisuudet
Työnjälki
2
0
Raportoi ongelmasta

Raportoi ongelmasta