Doepfer MCV4

Midi-CV / gate interfaceMCV4 is a low-cost MIDI-to-CV interface that allows monophonic synthesizers to be controlled via MIDI.

This interface converts MIDI information into 4 control voltages and one gate. It has an external plug-in power supply. It is important that the first control voltage and the gate are always set to MIDI note events, with the pitch bender being converted to the first CV. The remaining CVs can be used to control further parameters of an older synthesiser in the sequencer, e.g. filter modulations. The 3 control voltages can be controlled via MIDI controllers. The interface receives an adjustable MIDI channel, which means that looping the MIDI signal makes sense.

Two jacks for CV1 / 2 and CV3 / 4
Jack for Gate / Trigger
Learning button with LED for setting the MIDI channel
Optical display of the gate / trigger function via LED
MIDI-in, MIDI-Thru connection
Metal housing
Dimensions: 95 x 75 x 35 mm
Power connection: 7-12V / 100 mA

30 30 dages-Money Back garanti

3 3 års Thomann garanti

Fås siden Marts 2002

Artikelnummer 153374

salgsenhed 1 stk

Wireless MIDI No

Midi Thru No

MIDI Merge No

MIDI Controller No

MIDI Converter / Interface Yes

MIDI Elektronic No

B-Stock from 752 kr tilgængelig

899 kr

Inkl. moms. Obs! Yderligere fragtomkostninger 60 kr

Salgsrang

i MIDI-tools

Pakker & tilbud

Doepfer MCV4 B-Stock
Hhv. med lette brugsspor

752 kr

Kunder som så på dette produkt købte dette

Kenton Pro Solo MkIII

38 Kundebedømmelser

5 29 Kunder 4 5 Kunder 3 2 Kunder 2 1 Kunde 1 1 Kunde

4.6 / 5

betjening

features

forarbejdning

Retningslinjer for anmeldelser

20 Anmeldelser

Vis oversættelse

Vis original

Der opstod en fejl. Prøv igen senere.

Dependable and Solid

Damian T. 17.12.2013

I use this unit to trigger sounds on my Roland SH101. The 101 only responds with certain octaves so I'm glad the unit has an LED that lights up when midi notes are sent to it so If I get no response from the synth I can quickly figure out where I've gone wrong.
Set up is very easy. You can change what midi channel the unit responds to by holding down the Gate/Learn button until the LED flashes, send it any midi note on the channel you want it to listen to, the flashing stops and now it only listens to that channel.
It can also do other tricks such as transposing notes but I never had any need for these functions, if you do start experimenting with it settings and get confused, it's very easy to return it to factory settings.

Anmeld bedømmelse

Synes du at denne vurdering er forkert eller af en anden grund ikke læselig? Vær venlig at skrive i det følgende kommentarfelt hvorfor og hvis muligt din email-adresse, så vi kan give dig en tilbage melding til din kommentar.

Vis oversættelse

Vis original

Der opstod en fejl. Prøv igen senere.

too simple

Matthew N. 02.07.2014

as midi to CV converters go this is the most simplistic and cheapest (well maybe not now) of them all.

its solid and reliable CV out is very stable and accurate (for note pitch) trigger time is very quick in some ways it never lets me down but it doesn't quite cover what can be done with Midi to CV. Firstly you need a dual mono 3.5mm to TRS jack cable to get the CV out (not easy to find) then it needs Midi messages to be set up IE which Midi message you Want to be converted. also 0-5 V Cv output only common but it limiting especially for the control voltages which need to be 0-10v for a full sweep.

Anmeld bedømmelse

Vis oversættelse

Vis original

Der opstod en fejl. Prøv igen senere.

Terrible

ekoloud 26.12.2017

i can control the notes and pitch on my sh 101 but can t use cv 2, 3 or 4 if, for instance i want to control the filter on a jupiter 6. tried several configurations and nothing. im using ableteon. could be me or the software. if its me than this product as terrible user interface and its not easy at all to use. not recommended

Anmeld bedømmelse

Læs alle anmeldelser

Doepfer MCV4

Midi-CV / gate interfaceMCV4 is a low-cost MIDI-to-CV interface that allows monophonic synthesizers to be controlled via MIDI.

Kunder som så på dette produkt købte dette

38 Kundebedømmelser

Du skal være logget på, for at kunne vurdere et produkt.

20 Anmeldelser

Smart Navigator

Artikel historik

Handl og betal sikkert

Dine fordele

Service

Serveret med kærlighed!

Doepfer MCV4

Midi-CV / gate interfaceMCV4 is a low-cost MIDI-to-CV interface that allows monophonic synthesizers to be controlled via MIDI.

Kunder som så på dette produkt købte dette

Tilbehør og matchende produkter

38 Kundebedømmelser

Du skal være logget på, for at kunne vurdere et produkt.

20 Anmeldelser

Sammenlign valgmuligheder

Smart Navigator