Der er 64 artikler i denne produktgruppe. Brug venligst søgefunktionen i navigationspanelet for at indsnævre søgningen.
Emner fra 1 til 50 vises.
Millenium MCT-20 Professional Cable Tester - easy-read LED indicator for XLR, balanced/unbalanced jack (1/4"), Speakon, RCA (phono), 5-pin DIN, Cat5, Speakon 4+8-pin, battery test LED, includes battery.
Digital Sound 8922 sound level meter - 31.5Hz-8kHz range (+/-1.5db), max-hold, fast/slow display, connections: RS 232, AC and DC out, 9V DC, IEC 651/type 2 and ANSI S1.4/type 2 (optional 282263 USB Cable and Software CDR + PC cable)
Digital Sound 8928 SPL Meter with Built-In Measurement Mic - calibrated from 300Hz to 8kHz (+/-2dB), 4 control zones in 10dB steps (40-130dB), large LCD display, peak-hold, fast/slow display modes, includes 9V battery. Not licensed.
NTI AudioXL 2 M4260 Set
NTI XL 2 M4260 Set - audio and acoustic analyser for precise control over audio levels. WAV file recording to register values of signals on to Mini-SD card (2GB card included). Includes M4260 class 2 microphone, built-in speaker to hear instant playback, rechargeable Li-Po battery,...
NTI AudioExel Acoustic Set Stipa+M2210
NTI Audio Exel Acoustic Set M2210 - contains all instruments and accessories for precise acoustic measurements and analogue audio testing. Set includes: XL2 audio and acoustic analyser, M2210 measurement microphone, Minirator MR-PRO, ASD cable for XL2, cable test plug (MR-PRO), mains power...
NTI AudioExel Acoustic Set Stipa+M4260
NTI Audio Exel Acoustic Set M4260 - contains all instruments and accessories for precise acoustic measurements and analogue audio testing. Set includes: XL2 audio and acoustic analyser, M4260 measurement microphone, Minirator MR-PRO, ASD cable for XL2, cable test plug (MR-PRO), mains power...
Phonic PAA3 - personal audio assistant 3 with 31 band specrum analyser, sound level meter, line level meter (dBu, dBV, Volt), phase checker, frequency response: 20Hz-20kHz, connections: USB. requires (4x1,5V, lasts ca. 7,5h), Power supply included
NTI AudioMR Pro Minirator
NTI Audio MR Pro Minirator - professional analogue audio signal generator. Sine, pink noise, white noise, delay test signal, wave files, 512 MB flash memory with USB connection (to save wave files and configuration), backlit graphical display, XLR/RCA out, XLR/USB in, takes 3x 1.5V AA...
NTI AudioExel Acoustic Set w/ M4260
NTI Audio Exel Akustik Set with M4260 measurement microphone containg 1x XL2 Audio- and Acuostic-Analysator, M4260 Class 2 measurement microphone, Minirator MR-PRO Signal generator, ASD cable for XL2, cable test plug (MR-PRO), powersupplyl XL2, powersupply MR-PRO, Exel system case
Millenium MCT-10 professional cable tester with easy-read LED indicator for XLR, balanced/unbalanced jack (1/4"), Speakon, RCA (phono), 5-pin DIN, with battery test LED. Includes battery.
NTI AudioDR-2 Digirator
NTI Audio DR2 Digirator - digital audio signal generator with surround test sequence for Dolby Digital, Dolby Digital Plus, Dolby E, Pro-Logic II, DTS and DTS-HR installations. Synchronize AES3, DARS, Word Clock and video signals, measurment for channel transparency, test signals for...
NTI AudioXL 2
NTI Audio XL 2, Audio- and Acoustic-Analyzer for Precise control over Audio levels,WAV-File recording to register values of Signals on to Mini-SD Card (2GB inkl.), All recordings are in Real time, Built-in Speaker to hear instant playback, rechargeable Li-Po Akku, programmable 1 Bit I/O...
Palmer Cable Tester, AH MCT8. Cable Tester with LED indicator, for: XLR, unbal./bal. jack (1/4"), Speakon, RCA, DIN (5 pol.), Battery test-LED, Note: LED-display easy to read and use
Thomann NB 2.2, Audio / Video Transformer Balun, 2 RCA Audio signals and 2 RCA Video signals can be sent over 1 Cat 5 cable, (audio up to 670 meters / video up to 305 meters), two units are necessary, includes mounting Plate, Dimensions 92 x 70 x 25 mm
Monacor LSP-102, 2 channel/3 out -Line-Splitter, (2 inputs/6 outputs), for connection of a mixer to more amps, XLR female in, 2 balanced XLR-outs (600 Ohms) with Groundlift-switch per channel, frequencyrange 20-20.000 Hz, hard metall housing, dimensions 160x55x105 mm, weight 980g
Fischer Amps PLP, loudspeaker testing set, the optimal aid for the tone technician, fast testing loudspeaker systems without additional equipment, 1W power output at 4/8 ohms tunable sine wave 90Hz-9kHz, current supply with 9V-block batterie, switchable XLR output of asymmetrical on ...
B-Stock, Phonic PAA3 - personal audio assistant 3 with 31 band specrum analyser, sound level meter, line level meter (dBu, dBV, Volt), phase checker, frequency response: 20Hz-20kHz, connections: USB. requires (4x1,5V, lasts ca. 7,5h), Power supply included, B-Stock with full warranty, may have...
NTI AudioPrecision Calibrator
NTI Audio Precision Calibrator, Class 1 sound calibrato r94 or 114 dB SPL @ 1 kHz reference signals for calibration of 1 / 2 "and 1 / 4" measurement microphones (for all audio measurement microphones of the manufacturer NTi)
NTI AudioExel Acoustic Set M2211
NTI Audio Exel Acoustic Set M2211 - contains all instruments and accessories for precise acoustic measurements and analogue audio testing. Set includes: XL2 audio and acoustic analyser, M2211 measurement microphone, Minirator MR-PRO, ASD cable for XL2, cable test plug (MR-PRO), XL2 mains power...
Whirlwind Cab Driver, test device for checking the operation of the speaker components within enclosures. A pink noise signal source is sent through pushbutton selectors to an assortment of speaker connectors, including Speakon NL8 and NL4, 1/4" TS and banana jacks
Galaxy Audio CM-C200, CHECKMATE Calibrator, Conforms to ANSI S1.40-1984 and IEC 942-1988, Class 2, Weight 200 g including battery, calibration level 94 dB and 114 dB for 1 ", ½" + ¼ "microphones, Includes: 9-volt battery, windscreen
NTI AudioXL2 Remote Measurement Option
NTI Audio XL2 Remote Measurement Option allows querying of the XL2 measurement data online via the USB interface. Multiple XL2 Analyzers can be implemented into a customer specific noise monitoring solution. The XL2 acts as a front end device for sound level measurements.
NTI AudioMR-2 Minirator
NTI Audio MR-2 Minirator - professional analogue audio signal generator with sine, square, pink noise, white noise, graphic display with backlight, XLR and RCA output, USB input, powered via 3x 1.5V AA batteries, includes USB cable. Optional power supply and bag available separately.
NTI AudioAL 1 STI-PA Analyzer Option
NTI Audio AL 1 STI-PA The STI-PA analyzer option for AL1 allows durable and reliable speech intelligibility measurement within 15 seconds (typical). Besides the single value STI or CIS test result, a detailed view of modulation indices and individual band level results is provided. The STI-PA...
BE-StationWi-Fi Bluetooth Bundle
BE-Station Wi-Fi Bluetooth Bundle - Be Station stand-alone receiver unit for all Yamaha digital consoles, Via wireless devices such as a PDA or Smartphone, LS9, M7, PM5D, DM 2000. 02R96, 01V96 Mixers, Bluetooth PDA unit with power supply (refurbished), SD-card with Be Mix software. Includes...
NTI AudioXL 2 Stipa Option
NTI Audio XL 2 Stipa Option, function measures the speech intelligibility of public announcement systems for XL 2 in the new Standards IEC60268-16:2003 and DIN VDE 0833-4. Necessary STI-PA Test CD or Minirator MR-PRO or NTi Audio TalkBox
NTI AudioAL1 Acoustilyzer
NTI Audio AL1 Acoustilyzer - the perfect all-in-one tool for sound engineers, installers and multimedia specialists. Sound Pressure Level: Leq, short-time Leq, LE, Lmin, Lmax, History Chart. Real Time Analyzer: 1/1 or 1/3 octave band resolution SPL/LEQ display per band, relative measurement...