La conținutul paginii

Pedal case

  • From 7 mm Multiplex
  • Supporting surface with hook-and-loop fastener
  • 22 x 22 mm Aluminium edges
  • 4 cm Foam padding in the lid
  • 1x Leather case handle
  • 2 Butterfly latches
  • Small steel ball corners
  • 4 Rubber feet
  • Made in Germany
  • Dimensions: 60 x 40 x 9 cm (up to approx. 10 Pedals)
  • External dimensions: 65 x 45 x 18 cm
  • Weight 8.5 kg
  • Colour: Phenol brown
disponibil din Septembrie 2011
numărul articolului 270898
unitate de vânzare 1 bucată(ăţi)
Number Of Effects 10
Incl. power supply No
Effect Send/Return No
Incl. Gigbag No
Incl. Case Yes
939 lei
Toate prețurile includ TVA
în stoc
în stoc

Acest produs e disponibil în stoc și poate fi expediat imediat.

Informații despre livrare
1

242 Evaluările clienților

4.8 / 5

Pentru a evalua produse trebuie să fiţi logat.

Reţineţi: Pentru a preveni evaluările bazate pe zvonuri sau reclame ascunse permitem doar evaluări de lşa clienţii noştri reali, şi care au cumpărat echipamente de la noi.

După logare veţi găsi de asemenea toate articolele care pot fi evaluate Centrul Logare Clienţi.

Manipulare

Măiestrie

126 Recenzii

google translate gb
Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.
Tp
Sturdy and fast
The practical guitarist 05.06.2020
Whether at home or on stage, I need two things: protection for my gear and being able to set things up fast. The Thon Effect Pedal Case offers both.

The case feels sturdy, in large part due to its weight (careful when moving it around, it can cause damage), but also because it's obvious that detail has been paid attention to, both during design and construction. All parts, fixed and moving, look and feel durable. It looks great and will probably look even better after some natural wear.

When on stage, dead time between bands usually needs to be as little as possible. When at home, every minute that goes towards setting up gear is a minute lost from practice. This case is easy to open (place on the floor and unhinge) and a bit more difficult to shut (align the rims to each other, then align the hinges to the slots), but it only takes seconds to do either so, when time is of essence, this pedal case delivers.

When open, the flat, black, carpet-like bottom surface is just serene. There's enough headroom inside to fit a wah-wah, as well as even taller pedals.

My wah-wah pedal sits near the middle of the board and I like to step on it with all my weight every now and then. That can't be done anymore. Maybe it could with an extra pair of feet at the centre, but it's not a big deal.

The package contained two adhesive stripes of hook-and-loop tape (both hook side), which, although I'm using at the moment, I'm not confident they hold up very securely on either side.

If I ever outgrow this case, I'll probably go for the bigger one.

Thomann's delivery was, as always, perfect.
Manipulare
Măiestrie
1
0
semnaleaza un abuz

semnaleaza un abuz

google translate gb
Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.
MV
Great case
Michiel Vetters 16.04.2020
Great pedal case and really sturdy. The handle feels nice and lifts easy. All the locks open perfectly and are smooth. The inside is covered with a foam pad that protects the pedals from falling out.

Recommend this to all guitar players!!!
Manipulare
Măiestrie
1
0
semnaleaza un abuz

semnaleaza un abuz

google translate gb
Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.
JS
Almost perfect, but one MAJOR flaw in the build quality...
Jonny Smokes 19.04.2025
The case itself and the build quality are top notch and I am very happy. However, the inner board material that the pedals are supposed to velcro to is way too fuzzy. When I tried to remove a pedal it was almost impossible to get the velcro away from the board. I ended up pulling most of the industrial strength velcro off my pedals, and now the fuzzy material is warped, stretched and falling off the pedal board in places. Thon should immediately replace this material with something more user friendly, because this fuzzy and weak base makes removing a pedal and reconfiguring the setup almost impossible without destroying things. I'm going to tear it all off and rebuild the inner board with a better velcro friendly material like thin industrial carpet. Thon should also do a much better job of gluing it to the wood. The existing glue is just squirted randomly in lines, where it should have been rolled out with a paint roller so it is evenly distributed and actually gives the base material equal strength. This is very sloppy and fell apart the first time I tried to move a pedal. Hopefully they discontinue using this in their future builds, but otherwise the case is great.
Manipulare
Măiestrie
0
0
semnaleaza un abuz

semnaleaza un abuz

google translate gb
Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.
YK
Reliable.
Yordan K 18.11.2019
Im using this for my multi effects Boss pedal. Not a single issue with it. With the time it collects some minor surface scratches which gives quite a character to it.
Recommend it.
Manipulare
Măiestrie
0
0
semnaleaza un abuz

semnaleaza un abuz