La conținutul paginii

Partition Set for Accessory Case

  • Suitable for all Thon accessory cases 30 x 30 cm (article numbers 168886, 168887, 168889, 168890, 168891 and 175177)
  • Set consists of 4 grid bars and 1 partition board
  • Partition board made of 9 mm multiplex
  • Spacer board is slightly tapered for easier insertion into the case
  • Grid bars made of solid plastic
  • Dimensions of the bar (length x width x thickness): 394 x 90 x 18 mm
  • Partition can be variably divided in 13.6 mm
  • 7 Mounting holes available
  • Expandable with pins and holes
  • Weight: 2 kg
  • Made in Germany

For installation in an existing accessory case, a drill and a riveting tool are required

  • Optional partition: Article number 339961 (not included)
  • disponibil din Iulie 2010
  • numărul articolului 251847
  • unitate de vânzare 1 bucată(ăţi)
  • Type Divider
181 lei
Toate prețurile includ TVA
în stoc
1

32 Evaluările clienților

4.5 / 5

Manipulare

Măiestrie

15 Recenzii

google translate gb
Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.
A
Good quality Thon flightcase accessory
Anonim 06.12.2016
Perhaps just a little pricey but the quality of this is more that OK.

Mind when you drill the holes from the inside out to put a piece of wood on the outer surface and drill downwards, so you drill into that wood.
This is to prevent that the outer protection layer of the case gets too splintered. Otherwise the pop nails might not cover the damaged wood. With a wood block is goes well.

Also plan firts were to put the nails, there might be too less otherwise.
0
0
semnaleaza un abuz

semnaleaza un abuz