Tama Spring Tight HP 900-77

16

Connector Piece Tensioning Spring Mount

  • For Iron Cobra Pedals
  • Delivery without spring
disponibil din Iulie 2000
numărul articolului 134363
unitate de vânzare 1 bucată(ăţi)
Type Spring Holder
47 lei
Include TVA la care se adaugă 89 lei costul de transport
în stoc
în stoc

Acest produs e disponibil în stoc și poate fi expediat imediat.

Informații despre livrare
Expediere preconizată până Marţi, 30.04.
1

16 Evaluările clienților

4.6 / 5

Pentru a evalua produse trebuie să fiţi logat.

Reţineţi: Pentru a preveni evaluările bazate pe zvonuri sau reclame ascunse permitem doar evaluări de lşa clienţii noştri reali, şi care au cumpărat echipamente de la noi.

După logare veţi găsi de asemenea toate articolele care pot fi evaluate Centrul Logare Clienţi.

Măiestrie

8 Recenzii

google translate gb
Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.
j
Simple replacement part. Spring not included!
jonathanhoey 23.06.2014
I bought this as a replacement part for my Iron Cobra Junior double pedal. I had been using only the right pedal with a single beater, and the original spring assembly had got lost.

Fitting is very straightforward - there is a collar that slides over a mounting post on the upright part of the pedal, and the threaded bolt then slides through that. The bolt has one side planed off to fit through the semi-circular hole - this prevents it from rotating once installed.

Similarly, the bottom nut has a triangular inner flange which fits into a triangular hole on the collar - again this prevents it from rotating or vibrating loose once set to the desired tension.

Note that this package does not include the actual spring itself - this is just the assembly to hold the spring at the bottom. I still had my original spring, but be aware that you will need to buy one separately if you don't have yours.
Măiestrie
0
0
semnaleaza un abuz

semnaleaza un abuz