Schaller Stop Tailpiece BC

33

Tailpiece for Electric Guitar

  • Total string spacing: 51.5 mm
  • Single string spacing: 10.3 mm
  • String radius: 12" (305 mm)
  • Total hole/bolt spacing : 81 mm
  • Dimensions (L x W x H): 101.2 x 17.8 x 12.5 mm
  • Finish: Black Chrome
  • Schaller No. 12050400
  • Includes 2 impact sleeves 7.93 mm (5/16") with 2 height adjustment screws 7.93 mm (5/16")
  • Made in Germany
disponibil din Februarie 2005
numărul articolului 176442
unitate de vânzare 1 bucată(ăţi)
Colour Black
Design Stop Tailpiece
Finetuner No
Incl. Bridge No
255 lei
Include TVA la care se adaugă 89 lei costul de transport
în stoc
în stoc

Acest produs e disponibil în stoc și poate fi expediat imediat.

Informații despre livrare
Expediere preconizată până Vineri, 3.05.
1

33 Evaluările clienților

4.8 / 5

Pentru a evalua produse trebuie să fiţi logat.

Reţineţi: Pentru a preveni evaluările bazate pe zvonuri sau reclame ascunse permitem doar evaluări de lşa clienţii noştri reali, şi care au cumpărat echipamente de la noi.

După logare veţi găsi de asemenea toate articolele care pot fi evaluate Centrul Logare Clienţi.

Măiestrie

15 Recenzii

google translate gb
Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.
A
Schaller - TOP quality
Anonim 07.08.2016
Schaller products are top quality, very accurate. As I built my dream guitar, it was very important to have all details in high quality, therefore I chose this Schaller tailpiece and some other details from Schaller as well. I would definitely recommend this tailpiece to everyone who is concerned about quality of the product.
Măiestrie
1
0
semnaleaza un abuz

semnaleaza un abuz

google translate gb
Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.
AF
Nice quality but the bushings are small and not universal-threaded
Andy Fereday 10.02.2022
I found this stop tailpiece to be a nice quality - the powder coating was uniform and there's a good weight to it. I bought it to replace an existing bridge but found the bushings were noticeably smaller. The thread in the posts was tighter than the thread in the existing bushings, so I couldn't simply switch out the posts as they didn't fit.
Măiestrie
0
0
semnaleaza un abuz

semnaleaza un abuz

google translate gb
Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.
m
Not as good as epiphone stop tail
meelo 28.08.2019
This stop tail doesn't lock into the installation pegs while strings are off, so this drops off very easily when strings are entirely removed for more comprehensive cleaning.

Installation pegs were also too short for the original holes I had in Epiphone SG, so I had to install the stop tail quite low compared to the old one. Would be nice if Schaller had extra selection of installation pegs for this and their bridges.
Măiestrie
0
0
semnaleaza un abuz

semnaleaza un abuz

google translate gb
Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.
e
Great quality
emmanuelrmx 26.03.2021
Nice finish and great quality, works good.
Măiestrie
0
0
semnaleaza un abuz

semnaleaza un abuz