Rode VXLR+

105

Plug adapter with power converter

  • TRS Mini-jack (3.5 mm) to XLR 3M
  • Integrated voltage converter from phantom power (12 - 48 V) to plug-in power (3 - 5 V)
  • Allows operation of Rode HS2, VideoMic GO and VideoMicro on professional XLR microphone inputs with phantom power
  • Jack socket with male thread for locking (for plug with cap nut)
  • Length: 66 mm
  • Weight: 60 g
  • Includes belt clip (removable)
disponibil din Iunie 2017
numărul articolului 416774
unitate de vânzare 1 bucată(ăţi)
Phantom Power Adapter and Feed Units No
Phantom Power Adapter Yes
Phantom power No
119 lei
Include TVA la care se adaugă 89 lei costul de transport
în stoc
în stoc

Acest produs e disponibil în stoc și poate fi expediat imediat.

Informații despre livrare
Livrare aprox. între Marţi, 7.05. și Miercuri, 8.05.
1

105 Evaluările clienților

4.7 / 5

Pentru a evalua produse trebuie să fiţi logat.

Reţineţi: Pentru a preveni evaluările bazate pe zvonuri sau reclame ascunse permitem doar evaluări de lşa clienţii noştri reali, şi care au cumpărat echipamente de la noi.

După logare veţi găsi de asemenea toate articolele care pot fi evaluate Centrul Logare Clienţi.

Măiestrie

67 Recenzii

P
E un adaptor de top
PHOTOMARKUS 06.02.2023
Daca vrem sa introducem semnal de la un microfon pe mufa jack 3.5 intr-un Zoom f6 sau alt reportofon cu mufe XLR, pentru a avea siguranta ca microfonul nu primeste din greseala 48 V si se arde, e preferabil sa folosim un adaptor care transforma phantom power 48 V in 1,5 V. Acesta e prototipul-RODE VXLR+. Mai exista VXLR Pro, care are niste avantaje subtile greu decelabile in raport cu varianta +.
Măiestrie
0
0
semnaleaza un abuz

semnaleaza un abuz

google translate gb
Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.
n
Very expensive for what it is
nicolasvp 18.09.2020
It's a flimsy adapter, the jack side is made to be screwed but I don't have those jacks, only regular ones, so it does wiggle quite a bit.

Other than that the power is converted from phantom power to the appropriate level so that part is ok.

Overall, I find this accessory very expensive for what it is.
2
0
semnaleaza un abuz

semnaleaza un abuz

google translate gb
Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.
C
Well done again Rode. 5*
CorkLiveTV 15.04.2018
Use
Connecting 5 SENNHEISER ME 2-II MIC via XLR to control room. Lavs needed power and this adapter did the job.

Pros
5 units was half the price of a single unit for the same function from OEM. Rode look after the end user so well.

Further information
What can I say you can't go wrong with Rode for anything. Use this for
5*

Excellent service by Thomann. 1st purchase. Strongly recommended.
2
0
semnaleaza un abuz

semnaleaza un abuz

google translate gb
Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.
l
Works fine but signal level is really low
lapsio 17.04.2020
Adapter works fine but when I connected my headset through it (Beyerdynamic MMX 300) signal level is really low. I need to max out preamps in interface to even hear something. I know it's always "better safe than sorry" since probably other mics could get damaged from higher voltage than VXLR+ feeds but still it's a bit of inconvenience.

Other than that everything is cool.
1
0
semnaleaza un abuz

semnaleaza un abuz

YouTube pe acerst subiect