Rockcare Fret Rocker Fret Levelling

126

Fret Rocker

  • Gauge for checking the flatness of the frets
  • 5 Precisely machined edges
  • Edge lengths: 10 cm, 7.5 cm, 5 cm, 3.5 cm and 2.5 cm
  • Suitable for instruments from Long-Scale E-Bass to Soprano Ukulele
  • Made of stainless steel
  • Additional measuring scales in millimetres and inches on the opposite sides
  • Can also be used to check and adjust string height, neck curvature, string spacing, pickup height and bridge height
  • Dimensions: 100 x 50 x 0,8 mm
  • Weight: 30 g
disponibil din Noiembrie 2018
numărul articolului 451413
unitate de vânzare 1 bucată(ăţi)
42 lei
Include TVA la care se adaugă 89 lei costul de transport
în stoc
în stoc

Acest produs e disponibil în stoc și poate fi expediat imediat.

Informații despre livrare
Livrare aprox. între Miercuri, 15.05. și Joi, 16.05.
1

126 Evaluările clienților

4.4 / 5

Pentru a evalua produse trebuie să fiţi logat.

Reţineţi: Pentru a preveni evaluările bazate pe zvonuri sau reclame ascunse permitem doar evaluări de lşa clienţii noştri reali, şi care au cumpărat echipamente de la noi.

După logare veţi găsi de asemenea toate articolele care pot fi evaluate Centrul Logare Clienţi.

Măiestrie

73 Recenzii

Z
Fret leveler
Zolly03 23.05.2023
Compact, sturdy and does everything it has to. Totally recommend it
Măiestrie
0
0
semnaleaza un abuz

semnaleaza un abuz

google translate gb
Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.
A
It works, but needs to be smoothed first
Alex<randomInteger> 09.01.2022
First impressions:
- It's thin. On the product photos it looks much thicker, maybe 1.5mm. In fact, it's 0.6 mm thick, just a little bit more than Rock'n'Ruler.
- The edges are not smooth. I had to file them carefully before I dared to put it on the frets of my guitar.

Usage:
After polishing it a bit, I used it on my bass to locate popped frets and fix them. It worked well, did what it should. So the thickness wasn't an issue after all, but I expected to see and feel a different tool.

Conclusions:
It's a useful tool to check your frets quickly, it does the job. But I feel it doesn't stand up to the proud names of Warwick and Framus engraved on it.
Măiestrie
0
0
semnaleaza un abuz

semnaleaza un abuz

google translate gb
Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.
L
medioker
Lum1r 05.06.2023
In my opinion, neither a tape measure nor a rocker :) rocker would have to be thicker, at least these 2-3mm. while measuring tape for spacers nice how they have painted rectangles with standard heights, then it is easier to quickly distinguish at what height is the string than counting dashes
Măiestrie
0
0
semnaleaza un abuz

semnaleaza un abuz

google translate gb
Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.
W
Edges aren't straigt
Wocky 24.03.2019
Worthless peace of metal.
It is pressed out a bigger sheet of metal, and therefore the edges arent 100% straight but curved.
Don't buy this... unless you have tools to make it straight again...
I tried sanding it straigt on a machined flat surface.. but because it is a manual operation... and a small peace of metal.. you cant get it done... you must machine this perfectly straight...
Now I used blade from a toolnife.. I think they are lasercut.. and thus pretty straight...
Măiestrie
4
2
semnaleaza un abuz

semnaleaza un abuz