La conținutul paginii

Professional XLR Female Connector

  • Thomann 70th Anniversary Model
  • Collet strain relief
  • Cable strain relief
  • Soldered contacts
  • Ergonomic design
  • Improved ground contact
  • Improved pin contact with solder stop
  • Housing colour: Black
  • Gold-plated contacts
  • disponibil din Aprilie 2024
  • numărul articolului 584860
  • unitate de vânzare 1 bucată(ăţi)
  • Connector Type Female
  • Installation No
  • Gold Contacts Yes
  • Angled No
  • Plug XLR 3-pol female
22,40 lei
Toate prețurile includ TVA
în stoc
în stoc

Acest produs e disponibil în stoc și poate fi expediat imediat.

Informații despre livrare
1

48 Evaluările clienților

4.9 / 5

Pentru a evalua produse trebuie să fiţi logat.

Reţineţi: Pentru a preveni evaluările bazate pe zvonuri sau reclame ascunse permitem doar evaluări de lşa clienţii noştri reali, şi care au cumpărat echipamente de la noi.

După logare veţi găsi de asemenea toate articolele care pot fi evaluate Centrul Logare Clienţi.

Măiestrie

27 Recenzii

Ti
Quality as expected
Thomann is the best 12.11.2024
You cannot go wrong with Neutrik. Easy to solder and robust construction, gold plated contacts.

As for Thomann, I could say they are very professional and ready to help you with any issue you would encounter.
Măiestrie
0
0
semnaleaza un abuz

semnaleaza un abuz

google translate gb
Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.
aT
Easy to solder
a Tamás 29.07.2024
The 3 cups are super easy to solder even with a cheap soldering iron and they keep the conductors well separated. I wish TRS connectors had a similar 3-cup layout on the inside.

Be careful not to leave extra solder on the outer sides of cups 1 and 2 otherwise the chuck might be pushing against them. Heat the cups from the bottom instead if you use solder on the tip to improve heat contact.

The boot does take some pushing to get onto a 7.6mm diameter cable but not impossible. There's a larger compatible boot and chuck Neutrik BXX-14 (available separately, only in black) the boot of which goes on easier while still holding well but for the chuck I prefer the narrower one included with this connector as that protects better against accidental pulling forces. The chuck included does not cover cup 3 though unlike the larger chuck BXX-14.
Măiestrie
0
0
semnaleaza un abuz

semnaleaza un abuz

google translate gb
Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.
H
Sturdy and well designed. Special edition makes it extra nice.
HerbyDerby 10.05.2024
I have been using Neutrik connectors with Sommer cables and never have to worry about lose connections. Great quality connector and the key is in the details. Very easy to solder and assemble. The 70 year special edition is in Thomann theme color boot and is at 12% discount compared to the regular NC3 FXX-B.
If its your first time making your own cables, then I recommend downloading the Assembly instructions from Neutrik and also refer to Sound_System_Interconnection pdf from Rane.
Măiestrie
2
0
semnaleaza un abuz

semnaleaza un abuz

google translate gb
Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.
PA
Ground shield electrical contact issue
PAFT Audio 20.05.2025
The external part is aluminium and is different compared to the traditional Neutrik connector. This external part shields only from RF field but not shield the 50/60Hz magnetic fields. Avoid this connector if you want to use with 3 active wires + shielding cables! The black painting of the aluminium enclosure prevent the electrical contact.
Măiestrie
0
0
semnaleaza un abuz

semnaleaza un abuz