Mojotone CTS 500K Std. Split P/P VT Pot

Start 360°

Arată traducerea

Potentiometer for Guitar and Bass

Integrated push/pull switch
Resistance curve: Logarithmic
Manufactured in accordance with the high quality requirements as set out by CTS
The "Vintage Taper" resistance curve of these potentiometers is between that of a standard logarithmic and that of a linear pot, enabling a more natural control response
Resistance: 500 kOhm
Finely grooved split shaft (24 splines for US guitars and pot buttons)
Shaft diameter: 6 mm
Thread length: 9.5 mm
Thread diameter: 9.5 mm
Housing diameter: 23.8 mm
Includes a washer, a tooth lock washer, and a nut

disponibil din Noiembrie 2020

numărul articolului 494193

unitate de vânzare 1 bucată(ăţi)

Design Split Shaft

Resistance Value 500 kOhms

Characteristic Curve Vintage Taper

Thread Length 9,5 mm

Tandem Poti No

Push/Push Push/Pull

Solderless No

shaft type grooved

68 lei

Include TVA la care se adaugă 89 lei costul de transport

Expediere preconizată până Vineri, 3.05.

Nivel de vânzări

în Potenţiometre

Asta au cumpărat clienții care au văzut acest produs

Allparts CTS 500K Audio Taper Pot

48 lei

cumpărat

Mojotone CTS 500K Std. Split VT Pot

53 lei

cumpărat

Allparts Audio Taper 500k Push/Pull Pot

53 lei

cumpărat

TAD CTS 500K Std. Spl. P/P VAT Pot

58 lei

37 Evaluările clienților

5 31 Clienți 4 5 Clienți 3 1 Client 2 0 Clienți 1 0 Clienți

4.8 / 5

Măiestrie

Recenzii ghiduri

29 Recenzii

Arată traducerea

Arată originalul

Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.

Excellent as a tone pot, tight fit!

Newbie Guitar Player 09.06.2022

I bought this as part of a pickup swap / rewiring job on my Squier Mustang HH. I installed it as a tone pot and wired the push-pull switch for splitting the bridge humbucker (neck position is a P90). The PCB makes it really easy to wire the P/P. There was also some space between the PCB and the pot itself to tuck in my capacitor and retain the original profile. Do beware that it is a full-sized pot and quite bulky, more so because of the P/P. Be careful and measure your guitar cavity before buying. The Mustang control cavity was a realy tight fit and I had to modify the part a bit by bending the two prongs at the top. I also routed the cables around the pot as there was no space behind/underneath it. The control plate on the Mustang is relatively thin sheet metal and the pot sticks up a bit above the surface, but that doesn't really bother me. Luckily I had no issues with the thread diameter and it dropped right into the control plate opening - no wobble, no need to enlarge the opening. For the knob I used a metal screwable one that has a smooth inside surface and is made for 6mm shaft. If you want to get a knurled knob or re-use your old knob, check your measurements and make sure it has the correct number of splines for the US standard.

Overall I am really satisfied with my purchase, even though I had some minor issues with the fitment. The pot functions well and I am happy with the tone responce I get from the vintage taper in conjunction with a 47nF capacitor. It rotates smoothly and doesn't scratch. Push-pull works as expected. As with any guitar mod, my advice is to measure carefully and be prepared to adjust some things if necessary.

semnaleaza un abuz

Consideraţi această evaluare inexacă sau inacceptabilă din anumite motive? Vă rugăm indicaţi motivul părerii dvs în următorul câmp – dacă e posibil – adresa de e-mail pentru întrebări suplimentare.

Arată traducerea

Arată originalul

Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.

Nice pot

StephanPK 27.01.2022

Big, easy to solder, but could not fit if you have small guitar cavity, so check it before you buy it

semnaleaza un abuz

Arată traducerea

Arată originalul

Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.

High quality

Burak Oncel 16.09.2022

This cts pots are in good quality, I like them. But they are very big. You need to know is your guitar cavity big enough for cts pots if you want to buy this product.

semnaleaza un abuz

Arată traducerea

Arată originalul

Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.

Mojotone CTS 500K Std. Split P/P VT Pot

LameGuitarist 17.11.2022

super good pot ... preoper resistance when turning and push-pull ... no wobble ... in fact only good things can be said :)

semnaleaza un abuz

Citește toate recenziile

Mojotone CTS 500K Std. Split P/P VT Pot

Potentiometer for Guitar and Bass

Asta au cumpărat clienții care au văzut acest produs

37 Evaluările clienților

Pentru a evalua produse trebuie să fiţi logat.

29 Recenzii

smart navigator

Produse vizualizate recent

Cumpărați și plătiți în siguranță

Beneficiile tale

Service

Servit cu dragoste!

Mojotone CTS 500K Std. Split P/P VT Pot

Potentiometer for Guitar and Bass

Asta au cumpărat clienții care au văzut acest produs

Accesorii și articole compatibile

37 Evaluările clienților

Pentru a evalua produse trebuie să fiţi logat.

29 Recenzii

Compară opțiunile

smart navigator