Conectare la centrul de clienți
Țară și limbă Country and Language

Miditech USB MIDI Host

26

USB MIDI Host

  • Ideal for adapting MIDI devices with a USB MIDI port to a normal 5-pin DIN MIDI connector
  • 1x MIDI input
  • 1x MIDI output
  • USB bus-powered
  • Includes a mini-USB cable and a USB power supply
Wireless MIDI No
Midi Thru No
MIDI Merge No
MIDI Controller No
MIDI Converter / Interface Yes
MIDI Elektronic No
disponibil din Noiembrie 2017
numărul articolului 425319
B-Stock disponibil 74 € din
88 € 435,54 lei
Include TVA la care se adaugă 19,90 € costul de transport
Prețul în lei este doar de ghidaj!
Disponibil imediat
Disponibil imediat

Acest articol este disponibil în stoc și se poate expedia imediat.

Informații despre livrare
Livrare aprox. între Joi, 9.12. și Vineri, 10.12.
1
21 Nivel de vânzări

18 Recenzii clienți

google translate gb
Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.
K
Hangs/Crashes whenever there's incoming MIDI Clock/Sync to the USB port for a few seconds
Koshdukai 07.08.2021
It kinda works fine when converting very simple USB-only controllers to MIDI DIN Out or when converting MIDI DIN In into USB-only devices.

Connecting it to USB-only devices that send out MIDI Clock/Sync msgs will hang it after a few seconds, so it's useless to convert USB MIDI devices like sequencers or drum-machines, like the (USB-only) Millenium MD-90 Mobile Drum, which was exactly why I bought the Miditech USB MIDI Host and it turned into a relatively expensive paperweight for me, since it's useless for what I wanted it for.

I also found out that it doesn't work with the latest Teenage Engineering OP-1 OS#243 firmware update. It does work with OP#242 ('OP-1 Midi Device MIDI 1' port), so I'm guessing it can't distinguish which of the 2 (renamed to 'OP-1 MIDI 1' and the new Audio 'OP-1') virtual device ports should connect to. It may be wrongly binding to the new Audio one now instead of the MIDI one, so it recognizes the connection (LED changes from RED to GREEN) but no data is transmitted to/from the MIDI DIN ports.

I ended up making my own custom made USB MIDI router out of a Raspberry Pi Zero and a powered USB HUB and an M-Audio MidAir interface but a wanted an even more compact and simpler solution which, unfortunately, the Miditech USB MIDI Host isn't and I ended up paying for it just to know that.

If MidiTech provides a firmware update that fixes these issues, then yeah, this would be a properly useful product. Until then, it's a paperweight :(
Manipulare
Caracteristici
Măiestrie
0
0
semnaleaza un abuz

semnaleaza un abuz

google translate gb
Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.
J
Old meets new.
Johnguitars 25.11.2018
I use this to link my Yamaha NP-32 piano to a Roland BK-7M and, for the most part, it does the job O.K. It does however hang up occasionally, causing a random note to stick. Switching the Roland off and on fixes this and it does not happen every time I play. This problem may of course lie with the keyboard or the module and the Miditech might be completely innocent. As I do not gig it is not a problem. Note that the midi sockets are rather stiff so make sure the cable is rammed home.
Manipulare
Caracteristici
Măiestrie
2
0
semnaleaza un abuz

semnaleaza un abuz

google translate gb
Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.
f
flyweight 15.04.2019
Does not send or receive midi clock :(
Manipulare
Caracteristici
Măiestrie
5
2
semnaleaza un abuz

semnaleaza un abuz

google translate gb
Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.
B
Miditech USB MIDI Host
Bleepity-Bloppity 07.10.2020
I use this box to send/receive MIDI singnals to my synths and modules. This is an excellent little box that does exactly what it is meant to do, *BUT*...
Thomann! The PSU with the EU/UK adapter is *HUGE!!* Please look at getting some UK only PSUs!
Manipulare
Caracteristici
Măiestrie
0
0
semnaleaza un abuz

semnaleaza un abuz

Consultare