Manfrotto 143N Magic Arm

64

Holding Arm

  • With central, locking lever
  • Adapter: 16 mm stud with 1/4" female thread and 16 mm stud with 3/8 female thread
  • Max. load bearing capacity: 3 kg
  • Arm length: 53 cm
  • Weight: 1.07 kg
  • Colour: Black
disponibil din Iulie 2011
numărul articolului 268454
unitate de vânzare 1 bucată(ăţi)
B-Stock disponibil 433 lei din
466 lei
Include TVA la care se adaugă 89 lei costul de transport
în stoc
în stoc

Acest produs e disponibil în stoc și poate fi expediat imediat.

Informații despre livrare
Expediere preconizată până Luni, 29.04.
1

64 Evaluările clienților

4.8 / 5

Pentru a evalua produse trebuie să fiţi logat.

Reţineţi: Pentru a preveni evaluările bazate pe zvonuri sau reclame ascunse permitem doar evaluări de lşa clienţii noştri reali, şi care au cumpărat echipamente de la noi.

După logare veţi găsi de asemenea toate articolele care pot fi evaluate Centrul Logare Clienţi.

Măiestrie

23 Recenzii

google translate gb
Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.
S
very practical, but sometimes a little
Stephan7664 18.02.2014
This arm is a very practical accessory for mounting anything form a camera to lights/microphones or even as a camera-handle itself. There is one negative to it, though. The mechanism on my copy sometimes when tightening made a cracking noise, and for some time it wouldn't tighten or loosen up as much as it should, which went away after some time. If I need another one, I will get the manfrotto friction arm, which is more expensive, but I can tighten it with a screw mechanism, and not a springy one like on this.
Măiestrie
1
0
semnaleaza un abuz

semnaleaza un abuz

google translate gb
Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.
MP
Great for lights, not for cameras
Moment Photography 20.05.2021
Much like the Manfrotto 244N Variable Friction Arm, this is a brilliant bit of kit.

However there is a big and important difference between the two, and that is how they tighten.

Firstly (and less importantly), the lever sticks out somewhat and could get in the way.

Secondly, when you tighten this arm to a locked position, the lever jolts and this is a real issue if you are carefully positioning a camera on the arm and trying to get fine tuned framing.

If you only need a strong arm to roughly position something within a few cms then this is fine. Great for lighting, but if you need to be quite precise, you should buy the Manfrotto 244N Variable Friction Arm. In fact I would go as far as to say, just get the friction arm regardless, as I prefer it.

That said, this lever locking arm is also very solid and it will last a lifetime. It's a great piece of kit that is incredibly useful and easy to use.
Măiestrie
2
0
semnaleaza un abuz

semnaleaza un abuz

google translate gb
Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.
A
Clever, but needed a quick repair
Anonim 01.08.2014
These arms are very well built and have a clever mechanism that allows you to position whatever is on the end of it easily with one hand, whilst leaving the other free to lock the arm. The arm locks firm and feels like it would handle a good weight before it moved.
One of mine became stuck shortly after purchase. A search revealed that this is a common fault. I had to open up the centre cam and reposition 3 ball bearings that had jumped out of place. Now working A-ok again. I use mine for positioning radio microphone aerials and for this purpose they are perfect.
Măiestrie
2
0
semnaleaza un abuz

semnaleaza un abuz

google translate gb
Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.
A
The number one "fit-everywhere" boom!
Anonim 07.06.2016
It'll let you fit almost every possible item with a microphone thread, to any possible surface, bar, handle,... It's great, nice build quality too
Măiestrie
0
0
semnaleaza un abuz

semnaleaza un abuz