Make Noise Pressure Points

4

Eurorack Module

  • Controller module with touch plates that generate a gate signal (gate out) proportional to the pressure intensity and pressure duration
  • Cascadable up to 4 pressure points
  • Current consumption: 20 mA @ + 12V, 0 mA @ -12V
  • Dimensions: 20 HP x 24 mm (max depth)
  • Optional expander module: Article Nr. 414539 (not included)
disponibil din Decembrie 2017
numărul articolului 414541
unitate de vânzare 1 bucată(ăţi)
Width 20 TE / HP
1.155 lei
Transport gratuit incl. TVA
în stoc
în stoc

Acest produs e disponibil în stoc și poate fi expediat imediat.

Informații despre livrare
Expediere preconizată până Luni, 29.04.
1

4 Evaluările clienților

5 / 5

Pentru a evalua produse trebuie să fiţi logat.

Reţineţi: Pentru a preveni evaluările bazate pe zvonuri sau reclame ascunse permitem doar evaluări de lşa clienţii noştri reali, şi care au cumpărat echipamente de la noi.

După logare veţi găsi de asemenea toate articolele care pot fi evaluate Centrul Logare Clienţi.

Manipulare

Caracteristici

Măiestrie

4 Recenzii

google translate gb
Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.
o
Versatile and fun
omz 16.01.2020
This is the center piece of my small but growing modular; you can either control 4 events (by columns, which are assigned to both gate CV and continuous CV) or change 3 values across 4 constant levels (by rows), or a combination thereof. The little trimmer pot lets you adjust to your own skin resistance, to achieve more gradual transients.
It's a very creative module overall, and lots of fun.
The hardware feels solid overall: knobs and jacks are high quality.
Manipulare
Caracteristici
Măiestrie
1
1
semnaleaza un abuz

semnaleaza un abuz

google translate gb
Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.
a
azakim 11.04.2019
This is nice module. It enables you more contol over your patch or turn different "layers" of your patch on and off.

You can use 4 plates to control 4 different CV parameters. You have 4 steps of 3 parameters as well and 1 gate output per step. So you can send 3 different constant voltages per 4 steps. Normaly you engage step with touching the plate. But when you add Brains to it, you can have 4 step sequencer or more by changing the direction or restarting the pattern. Ultimately you can use all touch plates separately from clocked stages that means even more control.

Built quality is very nice. I do not have problem with touch plates even with dry skin. You can always adjust sensitivity.

Cons: Only problem with this unit is, when you have outlet or case power supply with ground issue, the touch plates does not react unless you hold the screw on the face plate or case rails.
Manipulare
Caracteristici
Măiestrie
0
0
semnaleaza un abuz

semnaleaza un abuz

YouTube pe acerst subiect