La conținutul paginii

Two-Channel Feedback Suppressor

  • Fully automatic operation with configuration-free setup
  • Provides up to 10 dB increase in system gain
  • Instantly detects and stops acoustic feedback
  • Fast and precise DSP selects and applies up to 32 filters per channel
  • Two fully independent audio channels for processing stereo or separate zone signals
  • Extremely narrow filters (down to 1/30th octave) to maintain overall signal integrity
  • Front-panel control with suppression and filter reset buttons
  • Two balanced/unbalanced inputs - line-level XLR/TRS combo and 3-pin Euroblock connectors
  • Automatic 100-240VAC universal Switched-mode power supply
  • Dimensions (H x W x D): 50 x 483 x 296 mm
  • Weight: 2.9 kg
  • disponibil din Iunie 2019
  • numărul articolului 466332
  • unitate de vânzare 1 bucată(ăţi)
  • Channels 2
799 lei
Toate prețurile includ TVA
Disponibil in 6-8 Saptamani
1

38 Evaluările clienților

4.3 / 5

Manipulare

Caracteristici

Măiestrie

29 Recenzii

Dm
Produs super ok
De mare ajutor 10.08.2024
Foarte de ajutor pentru oricine are nevoie să lucreze ca sunetist și are puține cunoștințe in acest domeniu.
Manipulare
Caracteristici
Măiestrie
0
0
semnaleaza un abuz

semnaleaza un abuz

google translate gb
Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.
A1
EXCELLENT, AUTOMATIC, FOR NON-TECHNICIANS. REMEMBER: DON'T OVERLOOK WITH VOLUME, A VERY BIG LARSEN WILL NOT STOP IT.
Alessandro 1965 25.04.2023
... perfect for non-technicians, very narrow filters, does not alter the sound. Mounted in a church, its job does, even if I was hoping for a little quicker time. In my case, one channel to the choir mixer, one channel to the priests' microphone mixer. output to a stereo power amp, left channel for priests voice, right channel for choir mixer. Church lenght 50 meters! It works, but be careful not to exaggerate the volumes...if the LARSEN is too loud, the device is not able to stop it...and in that case you need to reduce the volume quickly, before the speakers are damaged! ! Don't wait!! For me, a good practice is to keep the volume just high enough to cause little Feedback...at which point the device works properly. When you heard the filter "kicked in", at that point you can slightly lower the volume to be even safer. What I didn't understand is if the device ALWAYS keeps the filters in its memory, even if you turn it off and on again...sometimes, when it's turned on, it behaves as if I had pressed the reset button...but this, only if I turn on with the amplifier volume very high. Overall, GREAT. It promises up to 10 db of output, I think I earned 9!!
Manipulare
Caracteristici
Măiestrie
4
0
semnaleaza un abuz

semnaleaza un abuz

google translate gb
Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.
a
audiodes 25.07.2021
Used one of these in a Church Sound installation and I must say very easy to use and set up. It works well and gives the system a lot more gain and control of feedback. Would recommend and will use again and good value for money.
Manipulare
Caracteristici
Măiestrie
5
0
semnaleaza un abuz

semnaleaza un abuz

google translate gb
Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.
N
Very good results
NikolasGregor 25.08.2024
We use it with an analog console, I didn't expect it to have such good results
Manipulare
Caracteristici
Măiestrie
0
0
semnaleaza un abuz

semnaleaza un abuz