Göldo WS44B Trussrod

33

Truss Rod for Bass

  • Two parallel rods, one with a left-hand thread, the other with a right-hand thread, that warp when the screws are tightened
  • Works perfectly in both directions
  • Endpieces with hexagon socket
  • Width: 6 mm
  • Depth: 9 mm
  • Length: 590 mm
  • Weight: 178 g
disponibil din Aprilie 2006
numărul articolului 192677
unitate de vânzare 1 bucată(ăţi)
61 lei
Include TVA la care se adaugă 89 lei costul de transport
în stoc
în stoc

Acest produs e disponibil în stoc și poate fi expediat imediat.

Informații despre livrare
Livrare aprox. între Miercuri, 15.05. și Joi, 16.05.
1

33 Evaluările clienților

4.6 / 5

Pentru a evalua produse trebuie să fiţi logat.

Reţineţi: Pentru a preveni evaluările bazate pe zvonuri sau reclame ascunse permitem doar evaluări de lşa clienţii noştri reali, şi care au cumpărat echipamente de la noi.

După logare veţi găsi de asemenea toate articolele care pot fi evaluate Centrul Logare Clienţi.

Măiestrie

20 Recenzii

google translate gb
Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.
m
Produit très correct
marco_elwray 16.02.2022
Je ne travaille habituellement par avec cette marque mais ça m'a bien dépanné ! Et il fonctionne toujours, donc je trouve que pour le prix c'est très bien. La finition pourrait être un poil plus qualitative.
Măiestrie
0
0
semnaleaza un abuz

semnaleaza un abuz

google translate gb
Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.
A
Works well.
Anonim 21.03.2016
I used this in a DIY bass build. Because it fits in a simple straight channel it is one of the simplest types of rod to fit, making it a good choice for amateur builders like myself. It is quite small in section, which would allow for a slim neck if desired. It does require some care to keep glue out of the exposed screw threads when installing the fingerboard, and it might be a good idea to apply some lubricant to the threads before installing.
The adjusting nut is plain steel rather than plated. This is not a problem in use, but I prefer to use a cover over the adjustment cavity rather than leaving it on view. It is a dual action rod which could be used to add relief as well as to reduce it. In practice, I have never needed to add relief to a neck, but it is reassuring to have that capability.
Măiestrie
1
1
semnaleaza un abuz

semnaleaza un abuz

google translate gb
Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.
WB
Perfect!
Woodwork Barn 29.03.2020
Does exactly what it should. Good build quality and turns easily. I routed a 6.3mm wide slot, 10mm deep and it fitted perfectly. It probably would have squeezed into a 6mm wide slot but I found the 6.3 cutter first. No room for complaints here, it works perfectly. I probably could have found it a little cheaper on Ebay but I tend to trust Thomann more when I want quality and reliability and a fast delivery. Very happy. 5 stars all round. (again!) :)
Măiestrie
2
0
semnaleaza un abuz

semnaleaza un abuz

google translate gb
Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.
A
simple to use, sturdy and dependable.
Anonim 05.09.2014
I've used this item dozens of times... never had troubles. Easy to install and sturdy. Would be nicer if finished with something that could contrast rust but at this price absolutely nothing bad can be said!
Măiestrie
1
0
semnaleaza un abuz

semnaleaza un abuz