Fun Generation CL 105 A Stand Adaptor

50

Stand Adapter

  • Adapter for microphone stand (3/8") to the flange on the bottom of the Fun Generation CL 105 A (art. 437402)
  • Also suitable for Mackie SRM 150 (Art.252346), Behringer B105D (Art.477976) and Behringer B205D (Art.248038)
disponibil din August 2020
numărul articolului 486820
unitate de vânzare 1 bucată(ăţi)
14,60 lei
Include TVA la care se adaugă 89 lei costul de transport
în stoc
în stoc

Acest produs e disponibil în stoc și poate fi expediat imediat.

Informații despre livrare
Livrare aprox. între Marţi, 7.05. și Miercuri, 8.05.
1

50 Evaluările clienților

2.5 / 5

Pentru a evalua produse trebuie să fiţi logat.

Reţineţi: Pentru a preveni evaluările bazate pe zvonuri sau reclame ascunse permitem doar evaluări de lşa clienţii noştri reali, şi care au cumpărat echipamente de la noi.

După logare veţi găsi de asemenea toate articolele care pot fi evaluate Centrul Logare Clienţi.

Măiestrie

37 Recenzii

google translate gb
Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.
G
Rubbish
Grayoid 05.11.2021
The product is designed wrong. In the bottom there is a metal thread that is glued into plastic. When you tighten the item onto your stand the thread is not deep enough and causes the metal insert to become loose. My monitor smashed on the floor and broke. This is a terrible item don't buy it.
Măiestrie
2
1
semnaleaza un abuz

semnaleaza un abuz

google translate gb
Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.
J
Poor Quality
JamesBy 05.08.2022
The metal push fit section of the adaptor is not secure - first time I mounted the monitor, the plastic section separated from the screw thread and the monitor fell off. I bought 2 of these - both the same. It's quite soft plastic so it will only get worse. Putting the two parts back together just weakens the connection and shreds the plastic inner grooves meaning each refit is loose than the previous one. This product is not fit for purpose. The Mackie version is a higher quality and solid as a rock. Unfortunately they're hard to get hold of. Behringer used to include this adaptor WITH the monitor but now you have to source from a third party seller. Not good.
Măiestrie
2
1
semnaleaza un abuz

semnaleaza un abuz

google translate gb
Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.
TR
Dreadful - but can be improved !
Tony Roberts 10.05.2023
I'm a fan of Thomann, but the design and construction of this piece is frankly ridiculous ! As others have pointed out, the 5/8 female threaded ring is just lightly pressed into the plastic part, so it pulls out easily - potentially causing your beloved personal monitor to crash to the floor. There's also nowhere near enough thread.

However, alternatives are hard to come by, so for a bit of effort it can be improved. I used a 5/8-F to 1/4-M adaptor and extended this with a piece of 6mm brass tubing, reamed out to 1/4-20 and screwed tightly to the adaptor (with thread-lock). I then pressed this piece into the plastic part, packing this first with epoxy so it won't pull out.

Ridiculous to have to do this, but I think it will hold !
Măiestrie
2
0
semnaleaza un abuz

semnaleaza un abuz

google translate gb
Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.
JD
Definitely add this
Johnny Deadly 06.03.2021
If you're buying the Behringer B105D or the FG CL105A I would definitely add this to your order. Lifting the monitor off the ground and attaching it to a mic stand really brings out the acoustics and power. An inexpensive way to help your sound
Măiestrie
0
1
semnaleaza un abuz

semnaleaza un abuz