Doepfer A-148 Dual Sample And Hold

46

Euro Rack Module

  • Dual Sample & Hold
  • Two separate sample/hold circuits
  • Euro rack format
  • Power requirements: +20 mA (+12V) / -20 mA (-12V)
  • Width: 4 HP / 20.0 mm
  • Depth: 30 mm (measured from the rear of the front panel)
disponibil din Iunie 2005
numărul articolului 182936
unitate de vânzare 1 bucată(ăţi)
Width 4 TE / HP
315 lei
Include TVA la care se adaugă 89 lei costul de transport
în stoc
în stoc

Acest produs e disponibil în stoc și poate fi expediat imediat.

Informații despre livrare
Expediere preconizată până Luni, 29.04.
1

46 Evaluările clienților

4.7 / 5

Pentru a evalua produse trebuie să fiţi logat.

Reţineţi: Pentru a preveni evaluările bazate pe zvonuri sau reclame ascunse permitem doar evaluări de lşa clienţii noştri reali, şi care au cumpărat echipamente de la noi.

După logare veţi găsi de asemenea toate articolele care pot fi evaluate Centrul Logare Clienţi.

Manipulare

Caracteristici

Sunet

Măiestrie

20 Recenzii

google translate gb
Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.
Z
A versatile little module
Zoë 10.03.2014
This module contains two identical parts, either of which can be set to either sample and hold or track and hold by moving its jumper. By default, you get one of each.

I'm not aware of just how much sample and hold units can vary in quality, although this pair certainly does the job. When it comes to features, Doepfer comes out on top again, as track and hold units are certainly rarer.

Using (A-118) white noise as a sample input and an LFO as a trigger input, you can create the random LFO setting found on classic monosynths like the Roland SH and Yamaha CS ranges. Being modular, you can also put it to other creative uses. For instance, it can emulate the sound of a low fidelity digital sampler, akin to bitcrushing, with a sample rate you can dynamically tweak.

This is one of those small, basic utility modules (along with the A-114 ring modulator and A-150 voltage controlled switch) that are about as useful as you are imaginative. They can greatly expand the possibilities of your A-100 just as long as you can use them creatively.
3
0
semnaleaza un abuz

semnaleaza un abuz

google translate gb
Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.
A
Hidden arpeggiator
Anonim 26.10.2016
Most of us will think of a sample and hold in terms of random generated sounds from bleeps to gurgling streams but it can also be used to generate melodies and arpeggios.

I connect an lfo set to square wave as a trigger for sampling.
I use another lfo set to sine wave as sample input, play around with the frequency. The output is fed to either the cv in of a vco or the fm in of a vco if you have one. Play around with these as they give different effects. The key is to experiment with the lfo sample rate which takes you from arpeggio like patterns to random patterns. That's just with one of the sample and hold sections and we have two to play with and the only limit there is your imagination. Thanks Doepfer!
2
1
semnaleaza un abuz

semnaleaza un abuz

google translate gb
Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.
A
I love it
Anonim 10.04.2022
Interesting modulo, with 2 posibilities: s&h and t&h
Manipulare
Caracteristici
Sunet
Măiestrie
0
0
semnaleaza un abuz

semnaleaza un abuz

google translate gb
Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.
RQ
Not Sexy but still desirable.
Renato Q. 03.09.2014
While it's not the most glamourous of modules it represents and area where Doepfer excels, the basic building blocks. The module is straight forward, something rare in the Eurorack world, and yet still has all the features you need to get great sounds. The secret ability to bitcrush with this module makes it a keeper!
1
0
semnaleaza un abuz

semnaleaza un abuz