Doepfer A-100 PMS 9 PSU3

5

Empty Housing for Eurorack Modules

  • 168 HP / 9 U
  • 100 - 240 V
  • 2 Built-in A-100PSU3: +12 V / 4000 mA, -12 V / 2400 mA, +5 V / 8000 mA
  • 6 Doepfer A-100 V6 Bus Boards with slots for up to 132 modules
  • Usable depth for modules: 70 mm in the area of the power supply unit, otherwise 100 mm
  • External dimensions with lid (W x H x D): approx. 90 x 48 x 23 cm (18 cm without lid)
  • Weight incl. lid: approx. 14 kg
disponibil din Februarie 2021
numărul articolului 508781
unitate de vânzare 1 bucată(ăţi)
System Eurorack
Width 3x 168 TE / HP
Height 9 U
Power Supply Yes
Formfactor Case
Power Supply Specifications +12V/4000 mA, -12V/2400mA, +5V/8000mA
6.333 lei
toate prețurile includ TVA
în stoc
în stoc

Acest produs e disponibil în stoc și poate fi expediat imediat.

Informații despre livrare
Livrare gratuită așteptată între Joi, 16.05. și Vineri, 17.05.
1

5 Evaluările clienților

4 / 5

Pentru a evalua produse trebuie să fiţi logat.

Reţineţi: Pentru a preveni evaluările bazate pe zvonuri sau reclame ascunse permitem doar evaluări de lşa clienţii noştri reali, şi care au cumpărat echipamente de la noi.

După logare veţi găsi de asemenea toate articolele care pot fi evaluate Centrul Logare Clienţi.

Caracteristici

Măiestrie

4 Recenzii

google translate gb
Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.
G
Mostly great, potentially a bit power starved
Geoffp 23.03.2022
I bought this to house diy NLC modules, which are mercifully low on their power requirements. It’s worth noting that this has the lowest power rating / hp of all Doepfer monsters (go one up and you get two psus for four rows, go one down and you get one psu for two rows). It’s utterly fine for low current modules, but do plan it out if going more mainstream.

I also bought this to go on top of a 12u monster. It works, it is stable, but it’s also worth noting that the connecting hinges needed to be drilled out to connect the cases together. They are not a clean fit.

The case itself is great! Deep, spacious, sensible rails. I don’t need the portability, but some of the additional costs over eg an ADDAC whopper is in the flight case design. It’s great as a flat against the wall case, and totally does it’s job.

Not deep enough to hold a spring reverb tank flat / horizontal. Pretty much the only fitting challenge I’ve hit!
Caracteristici
Măiestrie
0
0
semnaleaza un abuz

semnaleaza un abuz