Behringer 962 Sequential Switch

35

Eurorack Module

  • Analogue CV multiplexer / switch
  • 3 Trigger inputs and outputs
  • 3 Buttons for manual channel selection
  • CV Input for switching channels
  • 2 Parallel V trigger outputs
  • Width: 8 HP
disponibil din Mai 2020
numărul articolului 486900
unitate de vânzare 1 bucată(ăţi)
Width 8 TE / HP
273 lei
Include TVA la care se adaugă 89 lei costul de transport
Disponibil in 6-8 Saptamani
Disponibil in 6-8 Saptamani

Asteptam acest produs in stoc curand si va putea fi expediat imediat.

Informații despre livrare
1

35 Evaluările clienților

4.9 / 5

Pentru a evalua produse trebuie să fiţi logat.

Reţineţi: Pentru a preveni evaluările bazate pe zvonuri sau reclame ascunse permitem doar evaluări de lşa clienţii noştri reali, şi care au cumpărat echipamente de la noi.

După logare veţi găsi de asemenea toate articolele care pot fi evaluate Centrul Logare Clienţi.

Manipulare

Caracteristici

Măiestrie

18 Recenzii

google translate gb
Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.
J
Extend the 960 sequencer to 16 or 24 steps
John5372 10.12.2020
This is a v-trig driven 2 or 3 way switch. The 2/3 step selection is determined by patching an output from the 3rd step.
I use a pair of these to extend the 960 sequencers but it has other applications. It switches control voltages so can be used for switching between modulation sources like ADSRs. I have these in a large rig based on the Moog IIIp. I had the original Moog back in the day and these little eurorack clones work the same, are well built, smaller and cheaper. As it is driven by the rising edge of a v-trig you could use it with other systems. It works well with my Doepfer rig too. If you have a 960 sequencer you definitely need one of these.
Manipulare
Caracteristici
Măiestrie
3
0
semnaleaza un abuz

semnaleaza un abuz

google translate gb
Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.
s
Excellent module!
shlomi 29.01.2021
I recommend it for use in any Eurorac case. It is very useful. I use it mainly to change or replace a subject (instead of lowering or raising the volume in the mixer for example).
I recommend it for use in any Eurorac case. It is very useful. I use it mainly to change or replace a subject (instead of lowering or raising the volume in the mixer for example).
The price is very reasonable, it is highly recommended to buy more than one.
Manipulare
Caracteristici
Măiestrie
0
0
semnaleaza un abuz

semnaleaza un abuz

google translate gb
Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.
N
Must Have module for sure!
N.F 02.11.2022
the 962 Expands greatly on the capabilities of the 960 sequencer and is a great tool for routing and switching between signals to achieve complex modulation
Manipulare
Caracteristici
Măiestrie
0
0
semnaleaza un abuz

semnaleaza un abuz

google translate gb
Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.
J
Perfect pair for 960
Jardmonkey 05.03.2021
962 was made for the 960 sequencer, and it works perfectly. Build quality is like a tank, and the price is unbeatable! There are no cons for this purpose built module that does exactly what it is supposed to do.
Manipulare
Caracteristici
Măiestrie
0
0
semnaleaza un abuz

semnaleaza un abuz