AKG Rubber Plate for H516

21

Foam Rubber Plate

  • Suitable for H516
disponibil din Februarie 2009
numărul articolului 223178
unitate de vânzare 1 bucată(ăţi)
11,30 lei
Include TVA la care se adaugă 89 lei costul de transport
în stoc
în stoc

Acest produs e disponibil în stoc și poate fi expediat imediat.

Informații despre livrare
Expediere preconizată până Vineri, 3.05.
1

21 Evaluările clienților

3.8 / 5

Pentru a evalua produse trebuie să fiţi logat.

Reţineţi: Pentru a preveni evaluările bazate pe zvonuri sau reclame ascunse permitem doar evaluări de lşa clienţii noştri reali, şi care au cumpărat echipamente de la noi.

După logare veţi găsi de asemenea toate articolele care pot fi evaluate Centrul Logare Clienţi.

Măiestrie

9 Recenzii

google translate gb
Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.
L
doesn't stick
LasseLasse 11.06.2018
tried to use them on my accordion, mics fell off after less than 5 minutes. The glue is nowhere near strong enough to hold the H516 microphone.
Măiestrie
1
0
semnaleaza un abuz

semnaleaza un abuz

google translate gb
Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.
A
Rubber replacement pad
Anonim 07.04.2014
These rubber replacement pads that are used in conjunction with the h516 plate are excellent as they help reduce extraneous noise and vibrations from knocking the surrounding area around the base of the plate. I would highly recommend these to anyone using the c516 and b29 battery pack and microphone system. As my collection of accordions has grown over the past 5 years I've bought extra plates and pads do that I can simply move the akg c516 microphones I own from one instrument to another as and when required. I highly recommend these pads if you're going to add the plates in this fashion. Definitely recommend getting them and I always have a few in reserve.
Măiestrie
0
0
semnaleaza un abuz

semnaleaza un abuz

google translate gb
Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.
A
AKG Rubber Plate for H516
Anonim 10.05.2016
Instead of using screws for the H516 (which then holds C516 microphone) I always go for this rubber plates. Ive been using several of them on different instruments, although the main use is for accordion. The vibrations from the instrument transfered to the microphone are then heavily reduced. The glue is quite good, and I only had once the problem where the rubber plate deatached from the H516, but never from the instrument.
Măiestrie
0
0
semnaleaza un abuz

semnaleaza un abuz