t.akustik Mobile Wall

64

Foam Absorber Set

  • Consists of 3 absorber plates
  • 3-Segment stand and base plate with rubber feet
  • Material: Flexible polyurethane foam
  • Bulk density: 25.0 ± 5%
  • Compression hardness at 40% deformation: 5.0 ± 0.5 KPa
  • Tensile strength: 100 kPa minimum
  • Elongation at break: 80% minimum
  • Flame retardant in accordance with MVSS 302 (burning rate < 100 mm / min.), corresponds to DIN 4102 B3 (combustible)
  • Panel dimensions per piece: approx. 600 x 600 x 78 mm
  • Total height: 183 cm (180 cm stand + approx. 3 cm base plate with rubber feet)
  • Base plate dimensions (W x D): 55 x 29 cm
Disponível desde Outubro 2019
número de artigo 470199
unidade de venda 1 peça(s)
Type Absorber Wall
Material Foam
Dimensions 1830 x 600 mm
Colour Anthracite
Mostrar mais
B-Stock from € 93 disponível
€ 99
IVA incluído, € 20 de portes de envio adicionais
Em stock
Em stock

Este produto encontra-se em stock e pode ser enviado imediatamente.

Informações sobre o envio
Envio previsto até Segunda, 29.04.
1

64 Avaliações de clientes

4.4 / 5

Terá de iniciar sessão para classificar produtos.

Nota: De forma a prevenir que as classificações sejam baseadas em boatos, conhecimento limitado ou má publicidade nós apenas permitimos classificações provenientes de clientes no nosso website, que tenham adquirido o equipamento através de nós.

Após iniciar sessão poderá encontrar todos os produtos que poderá classificar em classificar produtos no centro de clientes.

acabamento

45 Críticas

google translate gb
Infelizmente ocorreu um erro. Por favor tente novamente mais tarde.
JS
Easy and very versatile
Jason S Thompson 26.02.2020
I purchased three of these mobile walls to assist in sound reduction in my shared office where I do some sound recording and engineering.

These are extremely lightweight and very easy to break down and store in a small corner of my room. The pole in the middle screws together from 3 segments, so this makes it easy to store, but also makes it very flexible in terms of set-up: you can have 1, 2, or all 3 panels together at once. I've only used it as a full wall, but the option of having a smaller sound wall is cool as well.

This is a great solution for lower-budget, non-permanent needs. If you're looking for a more high-end solution for a built-out studio, then perhaps this isn't the best option for you, but I could see this working well in a live room recording area when you need to have more modular sound panels/deflectors in different areas.
acabamento
8
0
Reportar a crítica

Reportar a crítica

google translate gb
Infelizmente ocorreu um erro. Por favor tente novamente mais tarde.
m
Works Great
martindslr. 06.03.2022
I put one on the side on a separate tripod Then one on top and a carb board cutout with foam pieces on the back and it is working like a DIY voal both. It really keeps the sound in best bang for the buck
acabamento
1
0
Reportar a crítica

Reportar a crítica

google translate gb
Infelizmente ocorreu um erro. Por favor tente novamente mais tarde.
P
Great for the Price
Poonzah 07.02.2024
I use the pads nowadays on the room walls instead of the stand it came with. Very effective for attenuating high frequency ringing room reverbs.

I tried to wrap multiple of these walls around the mic, to make a semi-closed booth. But it didn't work out well. One reason is the legs are wide, which does not let getting them pretty close to each other without them stepping on each other or mic-stand / singer stepping on them.
acabamento
0
0
Reportar a crítica

Reportar a crítica

google translate gb
Infelizmente ocorreu um erro. Por favor tente novamente mais tarde.
J
Perfect !
JumpinJack 25.10.2021
I was looking for this for so long before coming across it here, purchased 2 of them to go behind my desk and will be ordering a third. They have helped improve my home studio where I was unable to mount acoustic foam to the walls.

Putting them together is a doddle and placement is so easy, well worth the price !
acabamento
1
0
Reportar a crítica

Reportar a crítica