Infelizmente ocorreu um erro. Por favor tente novamente mais tarde.
A
Great replacement for cheap FR style arms
I have an Ibanez licensed Floyd Rose but the bar has never tightened down all the way and swings and wobbles. Following a tip on YouTube I bought this replacement from Schaller.
The bar looks like any one FR-bar, with a screw on top. This comes complete with bushel so you can replace the complete fitting including the screws and fitting on the underside of the tremolo bridge if you need too.
I only needed the bar, so unscrewing the fitting leaves you with a replacement bar, which fits perfectly and tightens correctly.
You may be able to get away with a cheaper solution buying the bar alone from another manufacturer at a cheaper price, but I saw differing reviews and didn't want to take the risk to solve this problem that I've been having for years. Fits perfectly!
The bar looks like any one FR-bar, with a screw on top. This comes complete with bushel so you can replace the complete fitting including the screws and fitting on the underside of the tremolo bridge if you need too.
I only needed the bar, so unscrewing the fitting leaves you with a replacement bar, which fits perfectly and tightens correctly.
You may be able to get away with a cheaper solution buying the bar alone from another manufacturer at a cheaper price, but I saw differing reviews and didn't want to take the risk to solve this problem that I've been having for years. Fits perfectly!
0
0
Reportar a crítica
Infelizmente ocorreu um erro. Por favor tente novamente mais tarde.
LF
Perfect for licensed and original floyds
Perfect product, works great on my OFR equipped Charvel 650xl and on a licensed Jackson floyd I have in an Ibanez RG.
Would buy again!
Would buy again!
0
0
Reportar a crítica
Infelizmente ocorreu um erro. Por favor tente novamente mais tarde.
IA
Loose fit!
I was a bit disappointed by this since the arm sits very loose in the housing and not the airtight fit I was hoping for. This makes it very bad if you want your whammy bar to swing freely without wobble in the housing like I want!
I have to find a way to fill up the wobble space with some hard plastic or make a completely new housing myself where I work.
It seems to be a lottery when you buy things like these since some people seem to get one with very tight tolerances and others don´t!
The only plus I can give is for the looks.
I have to find a way to fill up the wobble space with some hard plastic or make a completely new housing myself where I work.
It seems to be a lottery when you buy things like these since some people seem to get one with very tight tolerances and others don´t!
The only plus I can give is for the looks.
0
0
Reportar a crítica
Infelizmente ocorreu um erro. Por favor tente novamente mais tarde.
M
Detail that makes the difference
It's really true that sometime a little detail makes an incredible difference, comparing with the native arm this one is incredibly smooth and regular and floating is reduced at minimum level, I vividly suggest to upgrade with It cheap instruments where the difference will be more evident.
0
0
Reportar a crítica
Infelizmente ocorreu um erro. Por favor tente novamente mais tarde.
A
Be careful with the color
Replaced the tremolobar of a Floyd Rose Special with this one and it fit's perfectly.
On the product picture it looks like it was in a black nickel finish like the hardware on most ESP/LTD guitars have, but it is NOT, be warned!
The bar is just gloss black.
For the ESP users: Schaller refers to the black nickel finish that matches ESP hardware as 'Ruthenium'.
But nevertheless a very good quality tremolobar.
On the product picture it looks like it was in a black nickel finish like the hardware on most ESP/LTD guitars have, but it is NOT, be warned!
The bar is just gloss black.
For the ESP users: Schaller refers to the black nickel finish that matches ESP hardware as 'Ruthenium'.
But nevertheless a very good quality tremolobar.
0
0
Reportar a crítica
Infelizmente ocorreu um erro. Por favor tente novamente mais tarde.
AJ
Nice replacement
This is a perfect replacement if you are not satisfied with your tremolo arm, keep in mind that this is the kind of tremolo arm that you tighten with a screw and not the one you push in or tighten by spinning the entire arm, although this product replaces those types of tremolo arms if you dont like those ways of tightening.
I bought a Charvel So-Cal Japan wich have an asian made FRT02000 tremolo, I was not happy with the tremolo arm because it did not stay in place, the screw that holds the arm was either too loose or too tight and because of that the arm was never where I wanted it to be. I bought this instead and after the rather simple switch (I was only required to remove the backplate of the guitar in order to replace it) the arm stays just where I want it! Perfect!
I bought a Charvel So-Cal Japan wich have an asian made FRT02000 tremolo, I was not happy with the tremolo arm because it did not stay in place, the screw that holds the arm was either too loose or too tight and because of that the arm was never where I wanted it to be. I bought this instead and after the rather simple switch (I was only required to remove the backplate of the guitar in order to replace it) the arm stays just where I want it! Perfect!
0
0
Reportar a crítica
Infelizmente ocorreu um erro. Por favor tente novamente mais tarde.
A
Top notch trem arm
Top quality tremolo arm as expected from Schaller. I bought this to replace the arm on an old JT-590 Schaller FR tremolo unit. The JT-590 comes with a screw in arm, but this is a direct replacement - you just have to remove the housing unit and screw in the new one. A perfect fit.
0
0
Reportar a crítica
Infelizmente ocorreu um erro. Por favor tente novamente mais tarde.
A
Soild and fits perfectly
It dose its job,its made of metal,and fits my jackson Guitar perfectly.It will last as long as the Guitar, as long as i dont take it of, and lose it again.
0
0
Reportar a crítica
Infelizmente ocorreu um erro. Por favor tente novamente mais tarde.
A
Excellent replacement tremolo arm
I bought this as a replacement for my Yamaha RGX 420.
The price on this is really good and the item is perfect.
Very good quality and I recommend it.
The price on this is really good and the item is perfect.
Very good quality and I recommend it.
0
0
Reportar a crítica
Infelizmente ocorreu um erro. Por favor tente novamente mais tarde.
A
Perfect
I needed to replace the entire assembly on a Floyd Rose II and this fit perfectly. The only difference was that the bar is a tiny bit thinner and a little shorter than the original, and the screw is longer. Other than that not a lot to be said. Seems like a quality part and I'm happy to have the trem working again.
0
0
Reportar a crítica
