Puresound CPS1420 Custom Pro Wires 14"

200

Snare Wires

  • Model Series Custom Pro
  • For 14" snare drum
  • 20 strands
  • Steel coils
  • The Custom Pro Series wires are designed with Anti-Choke end plates that significantly reduce annoying snare buzz and also provide a wider range of available snare tension without choking the drum
  • The Speed Release straps allow the player to disengage the snare wires without releasing the straps for the strainer or butt clamps. The result is snare wire changes that can happen in seconds
Disponível desde Agosto 2011
número de artigo 269961
unidade de venda 1 peça(s)
Number Of Snare Wires 20
Size 14"
Material Steel
€ 33
IVA incluído, € 20 de portes de envio adicionais
Em stock
Em stock

Este produto encontra-se em stock e pode ser enviado imediatamente.

Informações sobre o envio
Entrega entre aprox. Segunda, 20.05. e Terça, 21.05.
1

200 Avaliações de clientes

4.6 / 5

Terá de iniciar sessão para classificar produtos.

Nota: De forma a prevenir que as classificações sejam baseadas em boatos, conhecimento limitado ou má publicidade nós apenas permitimos classificações provenientes de clientes no nosso website, que tenham adquirido o equipamento através de nós.

Após iniciar sessão poderá encontrar todos os produtos que poderá classificar em classificar produtos no centro de clientes.

impacto sonoro

acabamento

87 Críticas

google translate gb
Infelizmente ocorreu um erro. Por favor tente novamente mais tarde.
S
Still as good after 6 years of usage.
Sickorian 23.10.2017
I got this 6 years ago from a friend, and still sounds great. The Easy Release function is really helpful when traveling therefore it does not affect the lifespan of the drum heads. it really was an upgrade from the standard Wires that came with my Snare drum.
impacto sonoro
acabamento
0
0
Reportar a crítica

Reportar a crítica

google translate gb
Infelizmente ocorreu um erro. Por favor tente novamente mais tarde.
RC
A very nice idea
Rudi C. 06.03.2015
I have Puresound snares on my other snare drums and they have invariably been good quality snares. I was intrigued by the strap/quick release system on this model.

The straps have alignment marks. This makes it easier to line-up your snare so it is perfectly centered. The end of the straps have a slot that lets you slide a pin inside (cotter pin). This holds the end plates of the snare in place. It works well, and lets you replace the wire without having to undo the straps. It literally takes under a minute!

The end plates are shaped so they don't choke the snares even at higher tension. The resulting sound was crisper than the stock snares. There was also a reduction in buzz but not a total elimination.

I loved the sound and the quick change idea. I am going to try some other Puresound wires as it makes is so much easier to swap wires around. The only downside was that not all wires are the exact same length (e.g the Equalizer snare was longer than the Custom Pro) so I still needed to adjust the straps, but the swapping was still really quick.
impacto sonoro
acabamento
0
0
Reportar a crítica

Reportar a crítica

google translate gb
Infelizmente ocorreu um erro. Por favor tente novamente mais tarde.
A
Anónimo 02.07.2016
When i installed those, I couldn't set up properly my snare for weeks. No matter what I did (tuning, muffling, trying tricks like detune snare bed screws etc) I got excessive buzz and the snares sound was flabby, unless you overtight them. You could hear the snares hit the head right after the batter head sound.
I had to over-tighten the batter head, and I also had to over muffle the reso head with lots of tape, and i also had to overtighten the snares, to get a sound and feel that is just "ok".

The quality seems to be very good, and the fact that you can remove them and reinstall them in 30 seconds is something i liked a lot.
impacto sonoro
acabamento
0
0
Reportar a crítica

Reportar a crítica

google translate gb
Infelizmente ocorreu um erro. Por favor tente novamente mais tarde.
K
Zero quality control
KaroDeLina 10.05.2024
The sound of the wires is OK, the speed release system is pretty cool but... the part where the wires are welded to the plate is catastrophic, the wires are welded unevenly and the end of the wires stick out, so the sharp part of the wire can easily break through the thin bottom snare head, I honed the end parts as I had just put a new snare head on the bottom but I don't think it's something that is acceptable for ''pro wires''.
0
0
Reportar a crítica

Reportar a crítica