Neutrik NTP3 RC

319

Iniciar 360°

Mostrar tradução

Mini Jack

3.5 mm Angle - Jack male
Stereo
With 2-piece housing
Screw nozzle
Original Neutrik strain relief
Suitable for cables from 2.0 to 4.5 mm diameter
Nickel housing
Nickel contacts

30 30 dias dinheiro de volta

3 Thomann garantie de 3 anos

Disponível desde Março 2004

número de artigo 167467

unidade de venda 1 peça(s)

Build In No

Type TRS (stereo/sym.)

angled Yes

Plug Jack 3,5 mm TRS male angled

Mostrar variações deste produto

319

Neutrik NTP3 RC

Neutrik NTP3 RC Mini Jack * 3.5 mm Angle - Jack male * Stereo * With 2-piece housing * Screw nozzle * Original Neutrik s...

€ 4,44

Para o artigo

366

Neutrik NTP3 RC-B

Neutrik NTP3 RC-B Jack * 3.5 mm Angle - jack male * Stereo * With 2-piece housing * Screw nozzle * Original Neutrik stra...

€ 5,70

Para o artigo

€ 4,44

IVA incluído, € 20 de portes de envio adicionais

Envio previsto até Sexta, 26.04.

Posição de vendas

em Fichas mini-Jack de 3,5mm (macho e fêmea)

Eis o que compraram os clientes que visualizaram este artigo

50%

comprado

Este artigo exatamente

Hicon HI-J35S-Screw-M

319 Avaliações de clientes

5 254 Clientes 4 45 Clientes 3 17 Clientes 2 2 Clientes 1 1 Cliente

4.7 / 5

acabamento

Diretrizes de apreciações

131 Críticas

Mostrar tradução

Mostrar original

Infelizmente ocorreu um erro. Por favor tente novamente mais tarde.

Finally pro quality 3,5mm plug

Slobodan 06.02.2017

This is from my experience one of the very few 3,5mm plugs suitable for pro stage use. I use it for wired IEM and have a full confidence in it's construction.

The quality of the tip is standard from Neutrik, and it has strain relief that actualy does the job. For me this is really important feature for every pro audio cable.

This plug is really small and can be little tricky for soldering, almost impossible if your cable is over 4mm thick - it won't fit the strain relief. Due to that "only" 4 stars overall. But once completed, I believe it's indestructible

Reportar a crítica

Acredita que esta classificação seja por alguma razão imprecisa ou incaceitável? Indique-nos por favor a justificação na caixa de texto em baixo e se possível o seu endereço de email para eventuais questões.

Mostrar tradução

Mostrar original

Infelizmente ocorreu um erro. Por favor tente novamente mais tarde.

Expected more from Neutrik

Funeral Musician 22.01.2023

I purchased a few of these plugs because I wanted to shorten the cables on some of my headphones. Unfortunately, as I was putting the strain relief on the cut-off cable before soldering, the strain relief tore right at the molding line (please note that the diameter of the headphone cable did not exceed the maximum diameter specified by Neutrik on their website). There was also a large and unsightly molding mark on the strain relief, which could have been easily removed at the factory. I had to use a razor blade to cut it off flush. Finally, even though each metal part of the plug looked very high quality, when I screwed them all together, there were large gaps between them, and the entire assembly rattled when shaken. I had expected a lot more from Neutrik... Curiously, when I looked at the packaging the plugs had come in, on some of them it said “Made in Liechtenstein”, and on others — “Designed in Liechtenstein”. Does it mean that the manufacturing facilities have been moved elsewhere? It might have been a coincidence, but all of the “Made in Liechtenstein” plugs appeared to fit together a bit better than the “Designed in Liechtenstein” ones. I managed to finish the task using one of the better plugs, but I still had to glue it together with instant adhesive to prevent the unsightly gaps between the metal parts. I will not buy these plugs in the future.

Reportar a crítica

Mostrar tradução

Mostrar original

Infelizmente ocorreu um erro. Por favor tente novamente mais tarde.

Simple and pretty solid

ivoi.iovi 13.10.2021

These are very well designed for very easy soldering. The construction once made is rather hardy and I cannot foresee any issues. The space in the rubber relief is rather narrow so check your cables first, but it is also easy to cut to make clearance for slightly larger cables.
I've used these mostly for MIDI cables to go between guitar pedals and a Mfningstar MIDI box but have also used several for audio and I believe them to be excellent quality.

that's it, not really much to say except that these are a great choice if the size suits your needs!

Reportar a crítica

Mostrar tradução

Mostrar original

Infelizmente ocorreu um erro. Por favor tente novamente mais tarde.

Great jack

Ally 24.04.2017

Great jack although I will say it looked a little less chunkier and durable in the pictures then it actually was. Still great quality jack.

Reportar a crítica

Ler todas as reviews

Neutrik NTP3 RC

Mini Jack

Eis o que compraram os clientes que visualizaram este artigo

319 Avaliações de clientes

Terá de iniciar sessão para classificar produtos.

131 Críticas

Navegador inteligente

Artigos recentemente vistos

Compre e pague em segurança

Os seus benefícios

Serviço

Servido com amor!

Neutrik NTP3 RC

Mini Jack

Eis o que compraram os clientes que visualizaram este artigo

Acessórios e artigos correspondentes

319 Avaliações de clientes

Terá de iniciar sessão para classificar produtos.

131 Críticas

Comparar opções

Navegador inteligente