Kovax KCR400 Sel-Adhesive Sandpaper

13

Self-Adhesive Sandpaper

  • Suitable for use with HOSCO H-SB sanding blocks
  • Grit size: 400
  • Width: 64 mm
  • Length: 3.4 m
Disponível desde Janeiro 2021
número de artigo 511195
unidade de venda 1 peça(s)
€ 9,90
IVA incluído, € 20 de portes de envio adicionais
Em stock aproximadamente em uma semana
Em stock aproximadamente em uma semana

É previsível que este artigo entre brevemente e stock e o despacho poderá ser feito de imediato.

Informações sobre o envio
1

13 Avaliações de clientes

4.6 / 5

Terá de iniciar sessão para classificar produtos.

Nota: De forma a prevenir que as classificações sejam baseadas em boatos, conhecimento limitado ou má publicidade nós apenas permitimos classificações provenientes de clientes no nosso website, que tenham adquirido o equipamento através de nós.

Após iniciar sessão poderá encontrar todos os produtos que poderá classificar em classificar produtos no centro de clientes.

acabamento

6 Críticas

google translate gb
Infelizmente ocorreu um erro. Por favor tente novamente mais tarde.
T
Good quality for wood, NOT for metal!!!!
TrEr 07.06.2021
In Thomann's product description of the corresponding sanding blocks this sandpaper is recommended for fret leveling. Unfortunately this sandpaper is very poor for metal frets. It clogs up and gets dull almost immediately. I also tested it for polishing frets after leveling/crowing with the same poor result. Any decent quality sandpaper from your local hardware store will probably do a better job with frets.

It works great when used on wood though and it's a perfect fit for radius sanding blocks. I've leveled several fretboards using this sandpaper with excellent results.

Recommended for wood/fingerboards. Not recommended for frets.
acabamento
1
0
Reportar a crítica

Reportar a crítica

google translate gb
Infelizmente ocorreu um erro. Por favor tente novamente mais tarde.
i
Fret leveling
io74 13.04.2023
Used it for leveling the frets of a brand new strat that was must have skipped the ordinary quality control for the neck. I decided not to return the guitar just because i loved the finishing and the sound of the pickups. Attached to a sanding block of the appropriate radius, the paper did its job just great.
Of course fret polishing was required after that, but that's another story.
acabamento
0
0
Reportar a crítica

Reportar a crítica