Infelizmente ocorreu um erro. Por favor tente novamente mais tarde.
i
If you're reading this, you probably need these.
I think all the Jaspers stands already come with these holders, so their function should be no mystery.
My only gripe is the little hooks on the end - they are generally fine, but not quite long enough for certain keyboards. For example, the Akai AX60 has an angled lower chassis, so the hooks do not quite come up high enough to hold the keyboard in place. I own a few other vintage keyboards with a similar slope on the bottom, but I haven't tried them yet. I think the Korg DW series and Poly-800 may have similar trouble.
I was able to correct this by replacing the hooks with 1/4 x 3/4 inch aluminum bar stock. I cut the bar to about 65 mm in length, then drilled and countersunk a hole for the screw, and finally spray painted the pieces black. It was a lot of work, but it fixed the problem.
I'm rating these holders 5 stars for stability and quality, but only 4 total because they are not suitable for all keyboards, and Jaspers does not offer longer hooks for the end of the holders.
My only gripe is the little hooks on the end - they are generally fine, but not quite long enough for certain keyboards. For example, the Akai AX60 has an angled lower chassis, so the hooks do not quite come up high enough to hold the keyboard in place. I own a few other vintage keyboards with a similar slope on the bottom, but I haven't tried them yet. I think the Korg DW series and Poly-800 may have similar trouble.
I was able to correct this by replacing the hooks with 1/4 x 3/4 inch aluminum bar stock. I cut the bar to about 65 mm in length, then drilled and countersunk a hole for the screw, and finally spray painted the pieces black. It was a lot of work, but it fixed the problem.
I'm rating these holders 5 stars for stability and quality, but only 4 total because they are not suitable for all keyboards, and Jaspers does not offer longer hooks for the end of the holders.
0
0
Reportar a crítica
Infelizmente ocorreu um erro. Por favor tente novamente mais tarde.
D
handy swiss army-knife bits
I bought these additions to my Jaspers rack, and - pretty much as planned - was quite happy about their capabilities. Jaspers makes pretty flexible rack gear, so you can make the setup you really want to make.
These holders are great for small synths (e.g. microKORG, Minibrute), or the Roland Octapad, or even a shelf or laptop.
ONE WARNING: plan what you want to do before you get it all together. It's a bitch to un-rack everything and have to start over. So, I'd recommend making a plan before assembling everything. As with all rack projects I guess.
These holders are great for small synths (e.g. microKORG, Minibrute), or the Roland Octapad, or even a shelf or laptop.
ONE WARNING: plan what you want to do before you get it all together. It's a bitch to un-rack everything and have to start over. So, I'd recommend making a plan before assembling everything. As with all rack projects I guess.
0
0
Reportar a crítica
