Doepfer A-180-9

21

Multicore Module

  • Ideal for connecting multiple systems or housings
  • Up to 14 signals can be transmitted via common network cables (RJ45)
  • Width: 2 x 4 HP
  • Depth: 25 mm
  • Power requirement: +0 mA (+12 V) / -0 mA (-12 V)
  • Compatible with Intellijel Octalink 1U (Article Nr. 461580), not included
  • Scope of delivery: 2 modules and 2 network cables with a length of 0.5 m
Disponível desde Março 2018
número de artigo 435481
unidade de venda 1 peça(s)
Width 4 TE / HP
Tools 1
€ 119
IVA incluído, € 20 de portes de envio adicionais
Em stock
Em stock

Este produto encontra-se em stock e pode ser enviado imediatamente.

Informações sobre o envio
Envio previsto até Sexta, 26.04.
1

21 Avaliações de clientes

4.8 / 5

Terá de iniciar sessão para classificar produtos.

Nota: De forma a prevenir que as classificações sejam baseadas em boatos, conhecimento limitado ou má publicidade nós apenas permitimos classificações provenientes de clientes no nosso website, que tenham adquirido o equipamento através de nós.

Após iniciar sessão poderá encontrar todos os produtos que poderá classificar em classificar produtos no centro de clientes.

manuseio

características

acabamento

18 Críticas

google translate gb
Infelizmente ocorreu um erro. Por favor tente novamente mais tarde.
v
Neat & effective solution to carry CV and Audio
vovali 09.07.2019
I used the A-180-9 to carry CV signals between two euroracks 6 meters apart, and it worked perfectly.
Then I tested two A-180-9 carrying stereo audio signals from a patchbay (with amps, instruments, & effects), to a mixer, a tape recorder and A/D interface, all gathered 10 meters apart from that patch bay.
So Mixer, recorder and A/D were connected to one A-180-9 with short mono cables, then the two ethernet cable (well shielded, good quality CAT 6) went across the battlefield to the other A-180-9 close to the patchbay. Good signal, no interferences, no crosstalk.
I managed just two cheap long cables on the floor instead of 14 expensive ones. For this price is ace.
manuseio
características
acabamento
5
0
Reportar a crítica

Reportar a crítica

google translate gb
Infelizmente ocorreu um erro. Por favor tente novamente mais tarde.
jn
Great modular utility
james n 22.11.2022
Fantastic for reducing cable spagetti between different cases. It takes some testing of how to divide/pair the cables setting between audio and control voltage cables as there can be significant "leakeage" and ghost interference. But all in all I love these modules (I have 6 of them)
manuseio
características
acabamento
1
0
Reportar a crítica

Reportar a crítica

google translate gb
Infelizmente ocorreu um erro. Por favor tente novamente mais tarde.
x
a very useful tool
xavierxeon 06.05.2021
I have the 2 modules of the multicore on opposite ends of one 178 HP rack, so I do not need to have a lot of cables going across the rack. The 2 CAT6 cables connecting the multicores run behind the rack (3 meters, not the short ones supplied with the units).

It really helps clean up cable clutter and thus have more space for my hands to actually turn knobs on the modules.

Downsides are, that there is a light crosstalk between the channels (which you only here if you connect a cable from an unused channel to a mixer and crank up the volume) and that the cables going in / out of the multicore are bunched up really tight together.
manuseio
características
acabamento
3
1
Reportar a crítica

Reportar a crítica

google translate gb
Infelizmente ocorreu um erro. Por favor tente novamente mais tarde.
M
Helps bring sanity to wiring mess
Mibix 21.01.2022
nice for helping to limit the cables between cabinets. great for CV. have to be careful with audio. there can be some crosstalk. using cat8 cables helps but does not completely eliminate crosstalk.
manuseio
características
acabamento
1
0
Reportar a crítica

Reportar a crítica