Blackmagic Design MC SDI-HDMI 3G

42

Compact converter from SDI to HDMI signals

  • Supports all video standards in NTSC, PAL, 720 HD and 1080 HD
  • Supports software updates via USB-C connectionwith 17-point 3D LUT for colour calibration of screens, projectors and TVs of all types
  • With camera control functions for Blackmagic ATEM mixers
  • Supports 3G-SDI and HDMI timecode standards
  • With 3G-SDI technology and internal SDI reclocking
  • SDI video inputs: 1x for SD, HD or 3G-SDI
  • SDI video outputs: 1x loop-through output
  • HDMI output: 1x HDMI type A
  • Multirate support: Automatic detection of SD or HD
  • Power consumption: 1.6 W
  • Power supply: 4.4 - 5.25 V DC (power supply unit not included)
  • Dimensions: 77 x 56 x 25 mm
  • Weight: 150 g
Disponível desde Dezembro 2020
número de artigo 508043
unidade de venda 1 peça(s)
Input SDI
Output HDMI / SDI
€ 63
IVA incluído, € 20 de portes de envio adicionais
Em stock
Em stock

Este produto encontra-se em stock e pode ser enviado imediatamente.

Informações sobre o envio
Envio previsto até Segunda, 29.04.
1

42 Avaliações de clientes

4.8 / 5

Terá de iniciar sessão para classificar produtos.

Nota: De forma a prevenir que as classificações sejam baseadas em boatos, conhecimento limitado ou má publicidade nós apenas permitimos classificações provenientes de clientes no nosso website, que tenham adquirido o equipamento através de nós.

Após iniciar sessão poderá encontrar todos os produtos que poderá classificar em classificar produtos no centro de clientes.

manuseio

imagem/som

características

acabamento

22 Críticas

google translate gb
Infelizmente ocorreu um erro. Por favor tente novamente mais tarde.
DL
Great little box -currently requires bugfix
Daniel LP 15.02.2021
This is a very sturdily built breakout box with one simple task: convert your SDI signal to HDMI. It has a USB-C port for power as well as to connect to a host PC (more on that in a sec) - though you can also order the converter with an external PSU - as well as an SDI out to send your signal to another SDI device further downstream such as an LCD monitor or EVF.

For such an inexpensive and small device, it adds a nice feature: you can upload a 3D LUT to allow you to monitor your image on set with a specific look, to judge exposure, gamma/contrast curves etc, which not all monitors or EVFs support. However, with the latest firmware (as of Feb 21), based on forum posts, it appears several of these units are "faulty" (hopefully solved with a bugfix) and do not display the image correctly with a LUT loaded - you simply get a completely white screen. (The current workaround is to simply disable the LUT and monitor the image as-is.)
manuseio
imagem/som
características
acabamento
0
0
Reportar a crítica

Reportar a crítica