Behringer 962 Sequential Switch

35

Eurorack Module

  • Analogue CV multiplexer / switch
  • 3 Trigger inputs and outputs
  • 3 Buttons for manual channel selection
  • CV Input for switching channels
  • 2 Parallel V trigger outputs
  • Width: 8 HP
Disponível desde Maio 2020
número de artigo 486900
unidade de venda 1 peça(s)
Width 8 TE / HP
€ 56
IVA incluído, € 20 de portes de envio adicionais
Disponível em 6-8 semanas
Disponível em 6-8 semanas

É previsível que este artigo entre brevemente e stock e o despacho poderá ser feito de imediato.

Informações sobre o envio
1

35 Avaliações de clientes

4.9 / 5

Terá de iniciar sessão para classificar produtos.

Nota: De forma a prevenir que as classificações sejam baseadas em boatos, conhecimento limitado ou má publicidade nós apenas permitimos classificações provenientes de clientes no nosso website, que tenham adquirido o equipamento através de nós.

Após iniciar sessão poderá encontrar todos os produtos que poderá classificar em classificar produtos no centro de clientes.

manuseio

características

acabamento

18 Críticas

google translate gb
Infelizmente ocorreu um erro. Por favor tente novamente mais tarde.
J
Extend the 960 sequencer to 16 or 24 steps
John5372 10.12.2020
This is a v-trig driven 2 or 3 way switch. The 2/3 step selection is determined by patching an output from the 3rd step.
I use a pair of these to extend the 960 sequencers but it has other applications. It switches control voltages so can be used for switching between modulation sources like ADSRs. I have these in a large rig based on the Moog IIIp. I had the original Moog back in the day and these little eurorack clones work the same, are well built, smaller and cheaper. As it is driven by the rising edge of a v-trig you could use it with other systems. It works well with my Doepfer rig too. If you have a 960 sequencer you definitely need one of these.
manuseio
características
acabamento
3
0
Reportar a crítica

Reportar a crítica

google translate gb
Infelizmente ocorreu um erro. Por favor tente novamente mais tarde.
s
Excellent module!
shlomi 29.01.2021
I recommend it for use in any Eurorac case. It is very useful. I use it mainly to change or replace a subject (instead of lowering or raising the volume in the mixer for example).
I recommend it for use in any Eurorac case. It is very useful. I use it mainly to change or replace a subject (instead of lowering or raising the volume in the mixer for example).
The price is very reasonable, it is highly recommended to buy more than one.
manuseio
características
acabamento
0
0
Reportar a crítica

Reportar a crítica

google translate gb
Infelizmente ocorreu um erro. Por favor tente novamente mais tarde.
N
Must Have module for sure!
N.F 02.11.2022
the 962 Expands greatly on the capabilities of the 960 sequencer and is a great tool for routing and switching between signals to achieve complex modulation
manuseio
características
acabamento
0
0
Reportar a crítica

Reportar a crítica

google translate gb
Infelizmente ocorreu um erro. Por favor tente novamente mais tarde.
J
Perfect pair for 960
Jardmonkey 05.03.2021
962 was made for the 960 sequencer, and it works perfectly. Build quality is like a tank, and the price is unbeatable! There are no cons for this purpose built module that does exactly what it is supposed to do.
manuseio
características
acabamento
0
0
Reportar a crítica

Reportar a crítica