Audix ADX 10 FLP

37

Condenser instrument microphone

  • Cardioid polar pattern
  • Frequency range: 50 - 18.000 Hz
  • With on/off- and low-cut switch
  • With transport bag P1 and 8" / 2.43 m cable for a mini XLR 3-Pin TA3F and battery phantom-powered adapter belt pack APS-911 with XLR-male output
  • 1x Mignon/AA battery or 9 - 52 V phantom power
  • For use with standard XLR micro cables, or alternatively without APS-911: For example, with the Audix wireless system (required phantom power: 1x Mignon battery/AA or 9-52 V)
  • Incl. Clip for transverse flutes with structure-borne sound insulation and foam windshield
Disponível desde Setembro 2008
número de artigo 213884
unidade de venda 1 peça(s)
Clip-On Microphone Yes
B-Stock from € 209 disponível
€ 225
Envio gratuito, IVA incluído
Em stock
Em stock

Este produto encontra-se em stock e pode ser enviado imediatamente.

Informações sobre o envio
Envio previsto até Segunda, 29.04.
1

37 Avaliações de clientes

4.5 / 5

Terá de iniciar sessão para classificar produtos.

Nota: De forma a prevenir que as classificações sejam baseadas em boatos, conhecimento limitado ou má publicidade nós apenas permitimos classificações provenientes de clientes no nosso website, que tenham adquirido o equipamento através de nós.

Após iniciar sessão poderá encontrar todos os produtos que poderá classificar em classificar produtos no centro de clientes.

características

som

acabamento

26 Críticas

google translate gb
Infelizmente ocorreu um erro. Por favor tente novamente mais tarde.
J
Outstanding Mic!
JoeC 12.03.2015
This is an excellent microphone for flute.

It is very easy to fit onto the instrument, and has a nice long cable.

It is leagues ahead of the mic we used to use and does not seem to feedback. Instantly we noticed a jump in quality.

It can be powered by a single AA battery or via phantom power.

I had a slight mishap when I first got it - no sound! There is an on/off switch on the side, which can also act as an eq cut - this is not really needed on phantom power, and I would have preferred 2 seperate switches - one for power and one for eq, but it's not a deal breaker.

The only thing I don't like is that the XLR port was VERY tight, but I am sure this will loosen up over time.

If you want a flute mic, this is the one to buy!
0
0
Reportar a crítica

Reportar a crítica

google translate gb
Infelizmente ocorreu um erro. Por favor tente novamente mais tarde.
v
Super mic for flute
valtornist 01.02.2018
Very good microphone for a flute, a good sound, and a qualitative natural timbre of the tool.
0
0
Reportar a crítica

Reportar a crítica

google translate de
Infelizmente ocorreu um erro. Por favor tente novamente mais tarde.
B
Halterungen gesucht
BerndJ 18.06.2010
Dieses Mikro für Querflöte Mikro ist prima auf der Bühne, kein Stativ mehr vor der Nase und es klingt gut genug für Live. Der Mikrofonort direkt neben der Mundplatte bringt keine Übertragungsprobleme wegen des Luftstoms mit sich, auch kein "Poppen". Das Mikro scheint auch, richtige Plazierungen aller beteiligten Elemente ( Monitore z.B.) vorausgesetzt, recht rückkopplungssicher zu sein. Die Halterung, ziemlich clever konstruiert, wackelt nur, wenn der Gummiring der über den Flötenkopf gezogen wird nicht stramm sitzt, einen schmalen Streifen drunterkleben bringt Abhilfe.

Nur sehr, sehr schade, das es keine Extra Halterung für die Alt-Querflöte und das Piccolo gibt, um die Flöten schnell wechseln zu können. Solche lässt sich auch nicht so schnell selber konstruieren. Die Lösung des Flötenkollegen (s.o.) mit Klettband braucht leider zu viel Zeit beim Wechsel.

Im Übrigen lässt sich das kleine Audix-Mikro auch in die Konzertgitarre hängen und klingt, mit ein wenig EQ auch für diese Anwendung sehr brauchbar.
3
0
Reportar a crítica

Reportar a crítica

google translate fr
Infelizmente ocorreu um erro. Por favor tente novamente mais tarde.
S
Le micro flûte traversière
Stéphane178 12.03.2012
Je sonorise deux groupes folk avec chacun une flûte traversière.
Ce micro est tellement fait pour cet instrument que nous en avons deux (un pour chaque groupe).
Clarté dans le rendu, une fois la bonne position trouvée (en 15 à 20 minutes maxi), fini le souffle dans le micro, les variations de gain (le micro est sur la flûte).

Le seul bémol, c'est que les flûtistes tiennent à la tête de la flûte (en argent) et que le diamètre des flûtes (ou de la bague) n'est pas tout à fait identique.

Système D : couper un ballon de baudruche pour garder la partie droite qui protégera la flûte.

J'utilise également ce micro pour reprendre la clarinette à hauteur des clés
3
0
Reportar a crítica

Reportar a crítica

YouTube sobre este assunto