Infelizmente ocorreu um erro. Por favor tente novamente mais tarde.
CB
ART Phantom II pro for use with Zoom H4n recorder
I needed the ART PII to power a RODE NTG-2 which in turn was fed into a ZoomH4n XLR input ( instead of using the ZoomH4n phantom power ). However it gave "crackled" signal.
This was not the fault of the ART PII but due to the XLR input being unbalanced on the Zoom.
The ART Phantom II on its own is very silent when used for the purposes of connecting to a mixer that does not send phantom power and is a very useful piece of kit. Although it did not serve my purposes it is something that I will not part with. Well built too.
This was not the fault of the ART PII but due to the XLR input being unbalanced on the Zoom.
The ART Phantom II on its own is very silent when used for the purposes of connecting to a mixer that does not send phantom power and is a very useful piece of kit. Although it did not serve my purposes it is something that I will not part with. Well built too.
1
1
Reportar a crítica
