Schaller M6 135 Locking 3L/3R BC

129

Inizia 360°

Mostra traduzione

Clamping Machine Head Set for Electric Guitar

Precise, wear-free premium mechanisms
Small, lightweight design
Model: 3 Left/right
With Velvet-Tec and LX6-Lube technology
Very high quality surface finish due to improved manufacturing processes
Construction: Closed
Wings: M6 Metal large
Ratio: 1:18
Shaft length: 19.5 mm
Bore: 9.8 mm
Mounting: Screws & Locknut
Screw ear: 135°
Schaller article nr: 10020423.02.52
Finish: Black chrome-plated
Including: Fixing screws, banjo bolts and washers
Made in Germany

30 30 giorni soddisfatti o rimborsati

3 3 anni di garanzia Thomann

In catalogo dal Gennaio 2003

Numero di articolo 159043

Unità incluse 1 Pezzo

Colour Black

€ 139

Spedizione gratuita, incl. IVA

Classifica vendite

in Meccaniche per Chitarr 3L/3R

Comprati dai clienti che hanno visto questo prodotto

40%

comprato

Esattamente questo prodotto

€ 139

11%

comprato

Gotoh SG381-07 MG-T Locking 3L/3R B

€ 69

10%

comprato

Harley Benton Parts Locking Tuners 3R/3L BK

€ 45

comprato

Schaller M6 135 Locking 3L/3R CH

€ 129

comprato

Schaller M6 90 Locking 21,0 3L/3R BC

€ 141

129 Valutazioni dei clienti

5 115 Clienti 4 9 Clienti 3 3 Clienti 2 1 Cliente 1 1 Cliente

4.8 / 5

Qualità

Linee guida per la valutazione

74 Recensioni

meccaniche Schaller M6 135

Davide A 06.01.2019

ho montato queste meccaniche per fare un upgrade di una Harley Benton. Mi sembrano un ottimo prodotto, solido e ben fatto. Tengono bene l'accordatura e sono molto semplici da cambiare, non ho dovuto rifare il foro di fissaggio della piccola vite sul posteriore delle paletta.

Segnala un abuso

Trovate questa recensione sbagliata oppure per qualche motivo non utile? Scrivete gentilmente nel campo seguente il motivo della vostra scelta e se possibile inserite anche il vostro indirizzo email per eventuali domande.

Mostra traduzione

Mostra originale

Sfortunatamente si è verificato un errore, La preghiamo di riprovare più tardi.

Quality upgrades for 3+3 headstock

Andy Fereday 11.11.2020

I got a set of these to go on a Peavey SC-2 which I'm using as a platform for upgrading. They fit the existing holes very well and were really straightforward to fit. I put them on at the same time as a String Butler (the V3 model) and didn't have any problems fitting both together.

Installing new strings was really easy and quick. I didn't wrap the strings round the posts at all, just threaded them through the post, tightened the locking screw on the back, trimmed the ends off and tuned up. I was a bit nervous about whether this would hold the strings tightly enough, especially after cutting the ends down so short. Have to say, they're holding absolutely fine.

Tuning stability is really good with these on. You'll need to allow strings to stretch for a couple of days but then they seem to hold tuning really well.

The only word of caution I have is that the black coating can be easy to scratch when you're installing the machine heads. What I found helped was using one of those spanners that fits over the nut completely (the sort that comes in Ikea kits).

Very happy with these machine heads. They feel like they're really good quality. They're not exactly stiff to tune but they don't have that loose feeling of the old tuners I had on the guitar.

Segnala un abuso

Mostra traduzione

Mostra originale

Sfortunatamente si è verificato un errore, La preghiamo di riprovare più tardi.

outstanding

rabid 14.12.2021

love the feel of these, and they look great.
Couldn't do without the locking tuners now lol

Segnala un abuso

Mostra traduzione

Mostra originale

Sfortunatamente si è verificato un errore, La preghiamo di riprovare più tardi.

Great tuners - but just watch out for the shortish capstan

Rick A 06.11.2022

These replaced very old Gotohs without any need for additional screw holes, which made life very easy. However what I had not realised is that the capstan height is shorter, leaving very little to rise above the headstock. I had a choice of either sending them back or reducing the thickness of the headstock and I did the latter, sanding about 2mm off the back of it so that when fitted the capstan holes were nicely positioned to take the strings. Quite obviously this would not have been an option for the majority of projects, so just check that capstan height before you order to make sure it is sufficient. If it is then you're good to go, if not I suggest looking elsewhere. Now they fit I am very happy with them.

Segnala un abuso

Leggi tutte le recensioni

Schaller M6 135 Locking 3L/3R BC

Clamping Machine Head Set for Electric Guitar

Comprati dai clienti che hanno visto questo prodotto

129 Valutazioni dei clienti

Devi effettuare il login per poter lasciare una recensione.

74 Recensioni

Navigatore intelligente

Prodotti visti di recente

Acquisti e pagamenti sicuri

I tuoi vantaggi

Servizi

Servito con amore!

Schaller M6 135 Locking 3L/3R BC

Clamping Machine Head Set for Electric Guitar

Comprati dai clienti che hanno visto questo prodotto

Accessori e articoli coordinati

129 Valutazioni dei clienti

Devi effettuare il login per poter lasciare una recensione.

74 Recensioni

Confronta alternative

Navigatore intelligente