Göldo WS012 Slim Jumbo Frets

96

Fretwire Set

  • Jumbo frets, fretwire, pack of 25
  • Material: nickel silver
  • Dimensions: 2.3 x 1.3 x 70 mm
  • Material: Nickel silver
In catalogo dal Giugno 2005
Numero di articolo 180053
Unità incluse 1 Pezzo
Size Jumbo
Amount 25
€ 14,90
IVA inclusa,€ 15 di costi di spedizione aggiuntivi
disponibile
disponibile

Questo prodotto è disponibile e può essere spedito immediatamente.

Informazioni sulla spedizione
1

96 Valutazioni dei clienti

4.8 / 5

Devi effettuare il login per poter lasciare una recensione.

IMPORTANTE: Per evitare di inserire informazioni per sentito dire, non complete o sbagliate, permettiamo di dare un giudizio delle attrezzature solo ai nostri clienti che hanno comprato la merce direttamente da noi.

Dopo il Login trovi nella tua area cliente troverete sotto la sezione "Giudica i prodotti" tutti gli articoli ai quali potrete dare un giudizio

Qualità

35 Recensioni

S
Prodotto da non sottovalutare
Sint 27.05.2017
Il prodotto si presenta molto compatto, resistente ed anche abbastanza lucido. Non ho dovuto fare assolutamente fatica ad utilizzarlo, in quanto avendo già un suo radius ed è bastato solo tagliarlo ed inserirlo nel solco della tastiera. Ho dovuto solo piegarlo in modo tale da farlo aderire meglio ai bordi della tastiera. Prodotto sicuramente di grande qualità.
Qualità
0
0
Segnala un abuso

Segnala un abuso

G
ottimi
Gionata_Storm 29.05.2023
dovevo sostituire i tasti e questo set risponde completamente alle mie aspettative, sono soddisfatto di questo prodotto e lo consiglio anche ad altri. il prezzo e' ottimo.
Qualità
0
0
Segnala un abuso

Segnala un abuso

f
Ottimi
fedefico 28.02.2024
Ottimo per un restauro come si deve
Qualità
0
0
Segnala un abuso

Segnala un abuso

google translate gb
Sfortunatamente si è verificato un errore, La preghiamo di riprovare più tardi.
T
Good quality but should be slightly more curved
TrEr 19.05.2021
I was told that these should work for 9.5" radius fingerboards. The problem is, they are bent to more or less exactly 9.5" radius. They really need to slightly more curved to avoid the ends popping up when hammering the frets into the board. Manually bending a longer piece of fret wire is no problem but it's a bit tricky with these short pieces.

I got a good result in the end but it was a bit more fiddly than I hoped for. Longer pieces of fret wire, or the pre cut frets from Stew Mac, are much easier to work with, I will not buy these again. At least not for a 9.5-10" radius board. I guess they would work better for a slightly flatter fingerboard like 12" but the product description really should specify this and Thomann should give better information when asked about it.
Qualità
2
0
Segnala un abuso

Segnala un abuso