Doughty T58122 Half Coupler 75kg

66

Half Coupler

  • For tubes / pipes 48-51 mm
  • SWL (safe working load): up to 75 kg
  • M10
  • Weight: 0.18 kg
  • Super lightweight coupler
  • New model
In catalogo dal Dicembre 1999
Numero di articolo 140516
Unità incluse 1 Pezzo
Construction Type Half Coupler
Holder size 48 mm – 51 mm
Max. Load Capacity 75,0 kg
Mounting Type for Screws
Suitable for 20 mm pipe No
Suitable for 30 mm pipe No
Suitable for 35 mm pipe No
Suitable for 50 mm pipe Yes
Suitable for 60 mm pipe No
Suitable for 80 mm pipe No
Colour Silver
€ 16,90
IVA inclusa,€ 15 di costi di spedizione aggiuntivi
disponibile
disponibile

Questo prodotto è disponibile e può essere spedito immediatamente.

Informazioni sulla spedizione
1

66 Valutazioni dei clienti

4.8 / 5

Devi effettuare il login per poter lasciare una recensione.

IMPORTANTE: Per evitare di inserire informazioni per sentito dire, non complete o sbagliate, permettiamo di dare un giudizio delle attrezzature solo ai nostri clienti che hanno comprato la merce direttamente da noi.

Dopo il Login trovi nella tua area cliente troverete sotto la sezione "Giudica i prodotti" tutti gli articoli ai quali potrete dare un giudizio

Qualità

21 Recensioni

google translate gb
Sfortunatamente si è verificato un errore, La preghiamo di riprovare più tardi.
A
Doughty half Coupler
Anonimo 05.10.2015
This can probably carry what promised. Nice looking and well machined. But there is one bad mistake in design: If You want to put this around truss, You have to take the T-screw off just almost completely. It should be made so that You don't ever have to remove the T-screw.
Qualità
0
0
Segnala un abuso

Segnala un abuso

google translate gb
Sfortunatamente si è verificato un errore, La preghiamo di riprovare più tardi.
J
Very useful item
John8131 11.01.2015
Although this is primarily intended as a half-coupler, it is also very useful for mounting PAR lanterns at awkward angles.
Have also used it as a mounting device to fix custom equipment to a lighting bar.
Qualità
0
0
Segnala un abuso

Segnala un abuso

google translate de
Sfortunatamente si è verificato un errore, La preghiamo di riprovare più tardi.
m
Lohnenswert
mani 06.10.2009
Diese klassische Schelle ist immer noch die allerbeste Möglichkeit, z. B. einen Scheinwerfer an ein 50 mm Traversenrohr zu befestigen. Großer Vorteil ist hierbei, dass der besagte Scheinwerfer, im Gegensatz zu einem gewöhnlichen Haken, sehr nahe an der Traverse hängt, was insbesondere dann hilfreich ist, wenn nur eine sehr geringe Bühnenhöhe verfügbar ist. Obendrein kann man ihn in jede beliebige Position drehen ohne dass der Scheinwerfer langsam nach unten rutscht wie es oft bei Haken der Fall ist (eine große Hilfe dabei ist auch der extra Schrauber, den man viel fester als eine gewöhnliche Flügelmutter andrehen kann). Ein nicht ganz zu vernachlässigender Nachteil ist, dass man im Vergleich zu einem C-Haken, einiges mehr an Zeit zur Befestigung braucht.
Qualità
0
0
Segnala un abuso

Segnala un abuso