m
Premium perfectly crafted knobs.
Perfect quality knobs. Made of solid metal, knobs are bit heavy, CNC'd grip feels great, these small spikes are sharp and grips very well, not like cheaper knobs found on most guitars where the grip spikes are bit rounded and therefore slippery when you turn them. Expensive, but worth the price, you get a premium product.
0
0
Report
KL
The real deal - don't settle for less.
I've learned from experience that you get what you pay for.
These knobs are reassuringly solid, with just the correct level of roughness on the sides - so that you'll never slip when adjusting the settings on uour instrument.
These knobs are reassuringly solid, with just the correct level of roughness on the sides - so that you'll never slip when adjusting the settings on uour instrument.
0
0
Report
WP
1973 precision
they fit. not the quality of the originals ( not as heavy) but look nearly the same
0
0
Report
B
Good quality replacement
I used these to replace the knobs on my mexican blacktop tele.
I put all-new electronics and the old skirt-style knobs did fit the new pots (allparts push-pull), but they were very slippery and therefore almost impossible to engage the push-pull switch. These knurled knobs provide excellent grip, while restoring the more authentic tele controls look.
Pros:
Very high quality material and machining
nice reassuring weight
Cons:
a little pricey, but worth it
These are quite expensive for just some knobs, but the look and feel is very good
I put all-new electronics and the old skirt-style knobs did fit the new pots (allparts push-pull), but they were very slippery and therefore almost impossible to engage the push-pull switch. These knurled knobs provide excellent grip, while restoring the more authentic tele controls look.
Pros:
Very high quality material and machining
nice reassuring weight
Cons:
a little pricey, but worth it
These are quite expensive for just some knobs, but the look and feel is very good
0
0
Report
B
Perfect for P Bass
Purchased these a while back, just got around to installing them.
I replaced my stock P Bass pickups with a set of EMG HZ as I love the growl of the EMGs over the stock ones (I've been an EMG user for many years). The Fender knobs wouldn't sit right on the pot shafts so I purchased these to replace them. Fitted perfectly, nice bit of weight to them and installation took about 10 minutes.
Highly recommended.
I replaced my stock P Bass pickups with a set of EMG HZ as I love the growl of the EMGs over the stock ones (I've been an EMG user for many years). The Fender knobs wouldn't sit right on the pot shafts so I purchased these to replace them. Fitted perfectly, nice bit of weight to them and installation took about 10 minutes.
Highly recommended.
0
0
Report
K
Solid but pricey
I bought them to replace my old knobs on my 69 Reissue tele. A bit pricey as there are a lot of aftermarket products, but that’s the real deal if you have a USA fender.
The quality and the finish is what it makes the difference between fender and the other makers.
The quality and the finish is what it makes the difference between fender and the other makers.
0
0
Report
M
Fender Potiknobs for American Tele
I bought these as I was upgrading a 1996 Japanese P bass. I wanted new knobs to sit on the CTS pots I had bought. Basically, these are EXACTLY the same as what you would get on a USA Fender Precision today. That have a completely flat top, as opposed to the oval topped ones. They are quite heavy for what they are, meaning the turn with ease when in use. The barrel is also very grippy. The ones that came stock on the Japanese Precision looked similar but were much lighter and had tarnished badly. I'm expecting get these to last a lifetime.
Highly recommended.
Highly recommended.
0
0
Report
S
Good quality
I replaced the pickups and electronics on my P-bass with the EMG Geezer Butler. They come with larger potentiometers' shafts (1/4 inch) than the original and so I had to buy new knobs. I decided to buy the originals after reading the reviews of all the alternatives. They fit perfectly. They are rather expensive, compared to some of the alternatives, but they are solid and heavy.
0
0
Report
B@
perfect fit on solid shafts
I used these on a custom T type build. The fit and finish was perfect on CTS pots with short solid shafts with the 1/4" shaft. The checkering was very good, and the plating and finish was fantastic. I will be using these exclusively on future builds.
0
0
Report
H
For every use
You can use it for guitar/bass pots but also for pedal pots.Excellent high quality product.
0
0
Report