Millenium BS-500 Set

Set of Height Adjustable Monitor Stands

  • For near-field monitors
  • Panel surface: 23 x 23 cm
  • Height adjustable over several steps from 93 - 115 cm
  • Maximum load: 45 kg
  • Length of triangular base: 45 cm per side
  • Weight: 7.9 kg per stand
  • Set of 2 in a box

These are other customers' choices:

Customers who looked at this item have bought these:

Millenium BS-500 Set
69% bought this exact product
Millenium BS-500 Set
Available immediately
Available immediately

This item is in stock and can be dispatched immediately.

Standard Delivery Times
€48 Add to Cart
Gravity SP 3202 Studiomonitor Stand
7% bought Gravity SP 3202 Studiomonitor Stand €45
Millenium BS-500 WH Set
5% bought Millenium BS-500 WH Set €48
Millenium Desktop Monitor Stand DM2
4% bought Millenium Desktop Monitor Stand DM2 €17.50
Millenium Laptopstand Tripod
3% bought Millenium Laptopstand Tripod €19.40
Our most popular Studio Stands
3389 customer ratings:
  • 5
  • 4
  • 3
  • 2
  • 1
4.2 / 5.0
  • quality
1458 written ratings Read all reviews
Total
quality

STURDY MONITOR STANDS

08.07.2015
I just put Yamaha HS8 Monitors on these very well made steel stands. The stands are set up to just sit the monitors on and there's a couple holes pre-drilled for that type of mounting if you're comfortable with it. I would rather not drill the cabinets to secure the monitors on the stands as a personal preference so I'll be making some kind of bracket that will compliment the design and fulfill the purpose.

I really don't think the monitors will slide off because there's nice soft rubber strips on the platform of the stands though I'd just feel better knowing something else is holding them on.

As far as tipping over, I don't believe that will happen unless someone bumps into them quite hard. Currently, I have the stands at the lowest level whereas the stand base seems configured well enough to prevent tipping over at that height. I haven't tried higher levels but the higher they go, I would make sense that would increases the tipping tendency but there's room on the base to put weight if needed. That may not be necessary though, one would have to test it. The lowest height setting is perfect for me and it needs no added weight. It's all simple physics.

Great quality stands that are priced very reasonable.

Shipping takes a little more time from what I'm used to but it's worth a weeks wait or so. The price is more than fair and it seems Thomann is a great place to shop and I will do so again.

The stands are just as described and just as I expected. Thank you for reading my review and good luck shopping for great stuff!
Helpful · Not helpful · Report review
Report rating…

Do you believe this rating to be inaccurate or unacceptable for some reason?

Send report
Total
quality

Solid, Semi-Stable and Good for Homestudio

Ceyhun K., 01.10.2016
Positive: These stands are easy to mount/ adjust and are solid. They are stable for as long as the floor is perpendicular and not askew, and the height of the pole is not set too high.

The triangle shaped foot is very handy not only for stabilization but also for fitting the stand in corners! The adjustability is very flexible and suits for one's needs. One can adjust the height of the pole and the direction of the surface holder accordingly.

There is a soft material on the corners of the surface holders which prevents the speaker from sliding and shocks.

Negative: Consider taking the measurements of contact surface area of the stand and your speakers before buying. I have the Yamaha HS8 which does not perfectly fit on the surface of the stand, the speaker comes 1 to 2 cm out of the surface.

The stand is not that stable when the speaker is bigger or heavy. The surface holder is sometimes difficult to rotate.

Extra: There is a piece of metal that I do not know exactly the utility of. This piece fits in holes of the pole, I use it as a sort of security, if ever the pole doesn't hold and collapses. By putting the piece of metal in the hole, one can prevent/block the pole from sliding to the ground if ever it fails to hold.
Helpful · Not helpful · Report review
Report rating…

Do you believe this rating to be inaccurate or unacceptable for some reason?

Send report
Show variations of this product
Millenium BS-500 Set
(3388)
Millenium BS-500 Set

Set of Height Adjustable Monitor Stands For near-field monitors, Panel surface: 23 x 23 cm, Height adjustable over several steps from 93 - 115 cm, Maximum load: 45 kg, Length of triangular base: 45...

  • Type: Monitor Stand
  • Height min.: 830 mm
  • Height max.: 1150 mm
  • Weight: 7,9 kg
Gravity SP 3202 Studiomonitor Stand
(47)
Gravity SP 3202 Studiomonitor Stand

Stands for Studio Monitors Solid cast iron foot, Finish: Black powder coating, Max load: 50 kg, Tube diameter: 42 35 mm f /, Height adjustable from 900 - 1500 mm, Tray dimensions: 250 x 250 mm,...

  • Type: Monitor Stand
  • Height min.: 700 mm
  • Height max.: 1500 mm
  • Weight: 6,5 kg
Millenium BS-500 WH Set
(59)
Millenium BS-500 WH Set

Set of Height-Adjustable Monitor Stands For near-field monitors, Panel surface: 23 x 23 cm, Height adjustable from 93 - 115 cm, Load bearing capacity up to 45 kg, Length of each side of base 45cm,...

  • Type: Monitor Stand
  • Height min.: 830 mm
  • Height max.: 1150 mm
  • Weight: 7,9 kg
K&M 26740
(59)
K&M 26740

Monitor Stand Cast round base, For direct mounting of monitors with 3/8" thread connection, e.g. Genelec 1029 monitors, or for fixing a mounting plate for Genelec 1030 or monitors from other...

  • Type: Monitor Stand
  • Height min.: 895 mm
  • Height max.: 1370 mm
  • Weight: 10,6 kg
Millenium BS-3000
(156)
Millenium BS-3000

Sturdy Steel Stand for Monitors With large, completely level, cast round base (diameter: 455 mm), Tube combination adjustable in height via clamping screw and safety splint, For direct mounting of...

  • Type: Monitor Stand
  • Height min.: 945 mm
  • Height max.: 1420 mm
  • Weight: 10,6 kg
Millenium BS-1100
(139)
Millenium BS-1100

Sturdy Monitor Stand Tripod construction, Height adjustable, Adjustable rubber feet and spikes for adapting to uneven surfaces, Height: 740 - 1140 mm, Size of contact surface: 230 x 230 mm, Leg...

  • Type: Monitor Stand
  • Height min.: 740 mm
  • Height max.: 1140 mm
Genelec Z8000-409B Floor Stand
(16)
Genelec Z8000-409B Floor Stand

Speaker Stand For Genelec 8000 series, Diameter of the base: 450 mm, Height adjustable 950 - 1430 mm, Only usable to connect with plates 8020-408, 8030-408, 8040-408 or 8050-408 or optional...

  • Type: Monitor Stand
  • Height min.: 895 mm
  • Height max.: 1370 mm
  • Weight: 10,6 kg
Zaor Stand Monitor Cherry Black
(4)
Zaor Stand Monitor Cherry Black

Monitor Stand Isolation of the loudspeaker calibration by means of AERstop Pad on the upper platform, Adjustable height, Material: Mixture of solid wood and melamine resin coated chipboard, Load...

  • Type: Monitor Stand
  • Height min.: 800 mm
  • Height max.: 1150 mm
  • Weight: 20,0 kg
Millenium BS-2800
(100)
Millenium BS-2800

Monitor Stand With a stable tripod, Made from steel, Height adjustment using clamping knob and safety splint, Plate: 205 x 245 mm, Height: 68-114 cm, Colour: Black, Weight: 4.5 kg, Made in Germany

  • Type: Monitor Stand
  • Height min.: 680 mm
  • Height max.: 1140 mm
  • Weight: 4,5 kg
Zaor Miza D-Stand black / cherry
(34)
Zaor Miza D-Stand black / cherry

Table Stand for Nearfield Monitors Maximum load: 15 kg, Double insulation with AERSTOP on top and bottom, Height adjustable from 197 - 282 mm, Width: 210 mm, Depth: 210 mm, Weight: 4.5 kg per...

  • Type: Monitor Stand
  • Height min.: 155 mm
  • Height max.: 230 mm
  • Weight: 4,5 kg
K&M 26754
(1)
K&M 26754

Monitor Stand With tiltable mounting plate - from 0 ° to 12.5 °, Mounting plate: 257 x 230 mm, Additional stop bar, Max. Load capacity: 35 kg, Gradual height adjustment, Installation dimension...

  • Type: Monitor Stand
  • Height min.: 800 mm
B-Stock from €43 available
€48 £42.18
Incl. VAT; plus €10 shipping
Free shipping from €149

£ price – guideline price only

Available immediately
Available immediately

This item is in stock and can be dispatched immediately.

Standard Delivery Times
Share this product
Your Contacts
Phone: +49-9546-9223-30
FAX: +49-9546-922328
test results:
Offers include 20% British VAT and are valid as long as stocks last. Shipping costs to the U.K. are 10 EUR (approx. £7), free shipping on orders above 149 EUR. Please click here for international Shipping Costs and Delivery Times. We do not accept liability for typographical errors or inaccurate information of any kind. *RRP = manufacturer's / distributor's recommended retail price in Germany
Electro Harmonix Oceans 11 Reverb Gibson Les Paul M2 Citron Green Dante AVIO Analog Input Adapter 2x0 C.Giant LP-6210C Black Vic Firth SIH2 Presonus Studio One 4 Pro UG Prof/Prod Steinberg UR-RT2 TritonAudio FetHead Roland TM-6 Pro Drum Trigger Module Marshall Major III Bluetooth Black Fender SQ J.Mascis Jazzmaster 2018 Ampeg Opto Comp Compressor
Recommended
Electro Harmonix Oceans 11 Reverb

Electro Harmonix Oceans 11 Reverb, effects pedal, 11 different reverb types: HALL, SPRING, PLATE, REVRS, ECHO, TREM, MOD, DYNA, AUTO-INF, SHIM and POLY, Tails switch: Select whether the reverb fades out naturally or stops immediately when the pedal is switched...

to the product
€149
Recommended
Gibson Les Paul M2 Citron Green

Electric Guitar Poplar body, Maple neck, Rosewood fretboard (Dalbergia latifolia), Slim Taper neck profile - .800"-. 875", 22 Frets, Pickups: 2 Gibson Pro-Bucker humbuckers, Volume and tone controls, 1 Toggle switch, Chrome hardware, Wraparound bridge, Mini Button machine heads,...

to the product
€398
Recommended
Dante AVIO Analog Input Adapter 2x0

Dante AVIO Analog Input Adapter 2x0; converts analog audio line signals to feed any Dante-connected system; 96 kHz / 24 Bit; fully-functional Dante interface; adjustable signal levels: +24dBu / +4dBu / 0dBu/ 0dBV /-10dBV (through Dante Controller); frequency Response: 20Hz...

to the product
€163
Recommended
C.Giant LP-6210C Black

Keyboard 61 Keys with touch dynamics, 162 Sounds, 200 Rhythms, 61 Percussion effects, 50 Demo songs, Fill-in, sync and rhythms variations, Split function, Chord, Recording, Pitch bend wheel, Microphone input, Line out sockets, Headphone output, Sustain pedal connection, USB...

to the product
€66
(2)
Recommended
Vic Firth SIH2

Vic Firth SIH2 isolation headphones, (reduces overall noise levels by 25 dB). successor of the legendary Vic Firth SIH-1 headphones, features redesigned larger driver in the ear cups that deliver a more powerful low end, cleaner mids and clear highs...

to the product
€79
Recommended
Presonus Studio One 4 Pro UG Prof/Prod

Audio MIDI Sequencer (DAW) (download) Upgrade from Presonus Studio One Professional 1-3 / Producer 2 to Studio One 4 Professional Sleek single-window philosophy, Consistent drag-and-drop functionality throughout, Project page allows integrated mastering with DDP export, Redbook...

to the product
€145
(1)
Recommended
Steinberg UR-RT2

4x 2 USB 2.0 Audio Interface Up to 24-bit/192 kHz, 2 Class-A D-PRE microphone preamps with + 48 V phantom power, Rupert Neve Designs transformer switchable on each front input channel, 2 Analog XLR/jack combo inputs plus 2 line...

to the product
€311
(2)
Recommended
TritonAudio FetHead

TritonAudio FetHead, in-line microphone preamplifier, XLR 3-pole female XLR 3-pole male, ultra low noise Class A JFet amplifier, 27dB amplification (@3 KOhm load), 4 matched JFets, 24-48V Phantom Power required, for Ribbon & Dynamic microphones, shields phantom power from...

to the product
€66
(1)
Recommended
Roland TM-6 Pro Drum Trigger Module

Trigger Module For acoustic drummers who want to extend the sound possibilities of their drums with electronic sounds, 500 one-shot sounds, 268 V-Drum sounds, 80 Drum kits, SDHC card slot for importing your own samples, 6x 6.3 mm stereo...

to the product
€789
Recommended
Marshall Major III Bluetooth Black

Marshall Major III Bluetooth Black stereo headphones, on-ear design, closed back, foldable, Bluetooth® aptX Technology, up to 30 h running time, control knob on headphone, 40 mm moving coil dynamic speaker, newly constructed hinges and headband for a better fitting,...

to the product
€135
Recommended
Fender SQ J.Mascis Jazzmaster 2018

Electric Guitar J.Mascis (Dinosaur Jr.) Artist Model, Body: Basswood, Neck: Maple, Fretboard: Indian Laurel, Neck profile: C, 21 Jumbo frets, Nut width: 42.5 mm, Scale: 648 mm, Pickups: 2 Jazzmaster single coils, Adjusto-Matic bridge with vintage style floating tremolo,...

to the product
€477
Recommended
Ampeg Opto Comp Compressor

Effects pedal Analog bass compressor, Controllers for compression, release and output levels, True bypass, Power supply with 9 V battery or 9 V power supply (both not included, suitable battery available under Art. 132579 , suitable power supply under...

to the product
€99
Feedback Found an error or want to give us feedback about this page?

We're looking forward to hearing from you and aim to solve any problems as soon as we can.

Please leave a comment. Please enter your e-mail address.