Millenium BS-500 Set

Set of Height Adjustable Monitor Stands

  • For near-field monitors
  • Panel surface: 23 x 23 cm
  • Height adjustable over several steps from 93 - 115 cm
  • Maximum load: 45 kg
  • Length of triangular base: 45 cm per side
  • Weight: 7.9 kg per stand
  • Set of 2 in a box
4420 Customer Ratings:
  • 5
  • 4
  • 3
  • 2
  • 1
4.2 /5
  • quality
Total
quality
Disappointed
Nel., 05.02.2020
They seemed sturdy, reason why I purchased them, but they are not.

VERY BAD:
- The central vertical "tube" is only held by a single screw to the middle of the base, and it is likely very weak and easy to bend/damage. It does not fit very firmly, even when screwed with a lot of force
- There is metal or paint power inside the base frame, so you have to shake the things like a mad to get out what you can. Not only that powder is likely toxic (extremely thin), but also you clearly do not want that in any studio environment (magnets from speakers, mics, guitar pickups...)
- Bad powder coating/damaged finish on the base

LESS BAD
- Feet pressed inserts at the base are moving (not properly pressed into the base)
- Plastic molded parts are low quality
- You cannot put the lower cable managers, as they simply do not fit
- Not the best welding on the base
- I wish it was possible to lower a bit more the speakers

Unless you are on a budget and do not care about a bit of frustration, go ahead. I recommend purchasing something else, especially if you plan to move them a lot. You cannot tour with that.
Helpful · Not helpful · Report
Report rating…

Do you believe this rating to be inaccurate or unacceptable for some reason?

Send report
Total
quality
Nice design with lot of mistakes
Styller, 21.05.2020
I choose these stands because of the design and price and few of my friends already had them.

Pros:
+ Nice looking design with a triangle base
+ Panel has already pads on the top plate
+ price

Cons:
- Mine came already scratched and it wasn't even b-stock. The package was alright so it's probably the QC.
- Not enough holding holes in the main tube
- The backing pipe metal could be with a rubber finish. Resonates on certain low-end freqs.
- the whole held mechanism could be done wiser
- no really stable with 8" heavier nearfields
- the cable holders are made of the worse plastic and don't even keep in holes
Helpful · Not helpful · Report
Report rating…

Do you believe this rating to be inaccurate or unacceptable for some reason?

Send report
Total
quality
Solid, Semi-Stable and Good for Homestudio
Ceyhun K., 01.10.2016
Positive: These stands are easy to mount/ adjust and are solid. They are stable for as long as the floor is perpendicular and not askew, and the height of the pole is not set too high.

The triangle shaped foot is very handy not only for stabilization but also for fitting the stand in corners! The adjustability is very flexible and suits for one's needs. One can adjust the height of the pole and the direction of the surface holder accordingly.

There is a soft material on the corners of the surface holders which prevents the speaker from sliding and shocks.

Negative: Consider taking the measurements of contact surface area of the stand and your speakers before buying. I have the Yamaha HS8 which does not perfectly fit on the surface of the stand, the speaker comes 1 to 2 cm out of the surface.

The stand is not that stable when the speaker is bigger or heavy. The surface holder is sometimes difficult to rotate.

Extra: There is a piece of metal that I do not know exactly the utility of. This piece fits in holes of the pole, I use it as a sort of security, if ever the pole doesn't hold and collapses. By putting the piece of metal in the hole, one can prevent/block the pole from sliding to the ground if ever it fails to hold.
Helpful · Not helpful · Report
Report rating…

Do you believe this rating to be inaccurate or unacceptable for some reason?

Send report
Total
quality
STURDY MONITOR STANDS
08.07.2015
I just put Yamaha HS8 Monitors on these very well made steel stands. The stands are set up to just sit the monitors on and there's a couple holes pre-drilled for that type of mounting if you're comfortable with it. I would rather not drill the cabinets to secure the monitors on the stands as a personal preference so I'll be making some kind of bracket that will compliment the design and fulfill the purpose.

I really don't think the monitors will slide off because there's nice soft rubber strips on the platform of the stands though I'd just feel better knowing something else is holding them on.

As far as tipping over, I don't believe that will happen unless someone bumps into them quite hard. Currently, I have the stands at the lowest level whereas the stand base seems configured well enough to prevent tipping over at that height. I haven't tried higher levels but the higher they go, I would make sense that would increases the tipping tendency but there's room on the base to put weight if needed. That may not be necessary though, one would have to test it. The lowest height setting is perfect for me and it needs no added weight. It's all simple physics.

Great quality stands that are priced very reasonable.

Shipping takes a little more time from what I'm used to but it's worth a weeks wait or so. The price is more than fair and it seems Thomann is a great place to shop and I will do so again.

The stands are just as described and just as I expected. Thank you for reading my review and good luck shopping for great stuff!
Helpful · Not helpful · Report
Report rating…

Do you believe this rating to be inaccurate or unacceptable for some reason?

Send report
Show variations of this product
Millenium BS-500 Set
(4420)
Millenium BS-500 Set

Set of Height Adjustable Monitor Stands For near-field monitors, Panel surface: 23 x 23 cm, Height adjustable over several steps from 93 - 115 cm, Maximum load: 45 kg, Length of triangular base: 45...

  • Type: Monitor Stand
  • Height min.: 830 mm
  • Height max.: 1150 mm
  • Weight: 7,9 kg
Gravity SP 3202 Studiomonitor Stand
(209)
Gravity SP 3202 Studiomonitor Stand

Stand for Studio Monitors Massive cast-iron foot, Black powder-coating, Load capacity: 50 kg, Pipe diameter: 42/35 mm, Height adjustable from 900 - 1500 mm, Dimensions shelf: 250 x 250 mm, Weight:...

  • Type: Monitor Stand
  • Height min.: 900 mm
  • Height max.: 1500 mm
  • Weight: 6,5 kg
Millenium BS-500 WH Set
(189)
Millenium BS-500 WH Set

Set of Height-Adjustable Monitor Stands For near-field monitors, Panel surface: 23 x 23 cm, Height adjustable from 93 - 115 cm, Load bearing capacity up to 45 kg, Length of each side of base 45cm,...

  • Type: Monitor Stand
  • Height min.: 830 mm
  • Height max.: 1150 mm
  • Weight: 7,9 kg
K&M 26740
(97)
K&M 26740

Monitor Stand Cast round base, For direct mounting of monitors with 3/8" thread connection, e.g. Genelec 1029 monitors, or for fixing a mounting plate for Genelec 1030 or monitors from other...

  • Type: Monitor Stand
  • Height min.: 895 mm
  • Height max.: 1370 mm
  • Weight: 10,6 kg
Millenium Floor Monitor Stand DM1
(11)
Millenium Floor Monitor Stand DM1

Stand for Monitoring Loudspeaker Height adjustable from approximately 90 - 150 cm, Upper shelf (W x D): Approximately 256 x 330 mm, +/- 10 ° Inclinable, Clear dimension of the base plate (W x D):...

  • Type: Monitor Stand
  • Height min.: 900 mm
  • Height max.: 1500 mm
Millenium BS-1100
(213)
Millenium BS-1100

Sturdy Monitor Stand Tripod construction, Height adjustable, Adjustable rubber feet and spikes for balance compensation on uneven surfaces, Height: 740 - 1140 mm, Dimensions of the supporting...

  • Type: Monitor Stand
  • Height min.: 740 mm
  • Height max.: 1140 mm
  • Weight: 4,0 kg
Stairville Adjustable Moving Head Tower
(5)
Stairville Adjustable Moving Head Tower

Height Adjustable Stand For moving heads, loudspeakers or similar, Height adjustable from 96 to 176 cm in 10 cm increments, Tube diameter: 43/35 mm, Dimension of support plate: 35 x 30 cm,...

  • Type: Monitor Stand
  • Pole diameter: 35 mm
  • 2 pieces Set: No
  • Colour: White
  • Type de pied: Totem
  • Support: Plate
  • Material: Steel
  • Incl. Bar: No
  • Crank: No
  • Wind-Up Stand: No
  • Min Height (m): 0,96 m
  • Ringlock: No
  • Max Height (m): 1,76 m
  • Pneumatic: No
  • Max Load (kg): 60,0 kg
  • Foot Construction: Base
  • incl. Bag: Yes
  • Color: Black
K&M 26754
(12)
K&M 26754

Monitor Stand With tiltable mounting plate - from 0 ° to 12.5 °, Mounting plate: 257 x 230 mm, Additional stop bar, Max. Load capacity: 35 kg, Gradual height adjustment, Installation dimension...

  • Type: Monitor Stand
  • Height min.: 800 mm
  • Height max.: 1300 mm
  • Weight: 10,2 kg
Zaor Stand Monitor Cherry Black
(6)
Zaor Stand Monitor Cherry Black

Monitor Stand Isolation of the loudspeaker calibration by means of AERstop Pad on the upper platform, Adjustable height, Material: Mixture of solid wood and melamine resin coated chipboard, Load...

  • Type: Monitor Stand
  • Height min.: 800 mm
  • Height max.: 1150 mm
  • Weight: 20,0 kg
Genelec Z8000-409B Floor Stand
(27)
Genelec Z8000-409B Floor Stand

Speaker Stand For Genelec 8000 series, Diameter of the base: 450 mm, Height adjustable 950 - 1430 mm, Only usable to connect with plates 8020-408, 8030-408, 8040-408 or 8050-408 or optional...

  • Type: Monitor Stand
  • Height min.: 895 mm
  • Height max.: 1370 mm
  • Weight: 10,6 kg
Zaor Miza Stand V42 Black
(17)
Zaor Miza Stand V42 Black

Monitor Stand (Pair) High-quality monitor stand made from melamine resin coated chipboard, Simple and modern design, Vibration levels are kept to a minimum, Fixed height: 1071 mm, Stand and support...

  • Type: Monitor Stand
  • Height min.: 1071 mm
  • Height max.: 1071 mm
  • Weight: 40,0 kg
B-Stock from £39 available
£42
Including VAT; Excluding £8 shipping
Available immediately
Available immediately

This item is in stock and can be dispatched immediately.

Standard Delivery Times
Share This Product
Your Contacts
Phone: +49-9546-9223-30
FAX: +49-9546-922328
test results:
Offers include VAT and are valid as long as stocks last. We do not accept liability for typographical errors or inaccurate information of any kind. *RRP = manufacturer's / distributor's recommended retail price in Germany
(1)
Recently Viewed
Toontrack EZbass

Toontrack EZbass (ESD); virtual bass guitar; extensively produced bass software / plugin with 2 basses, based on samples of an Alembic 5-String bass and a 5-string Fender Jazz Bass; sub bass with two synthesized sine tones add both fullness and...

Recently Viewed
Adam T8V

Adam T8V; Active Nearfield Monitor; 8" Woofer; 1.9" U-ART Accelerated Ribbon Tweeter; 2x Class-D Amp: 70 Watts RMS Woofer, 20 Watts RMS Tweeter; Frequency Range: 33 Hz - 25 kHz; Crossover Frequency: 2.6 kHz; max. SPL: 118 dB (1m /...

(5)
Recently Viewed
Behringer CAT

Analogue Synthesiser VCO 1 with 4 miscible waveforms (sawtooth, triangle, pulse and suboctave), Pulse width modulation and two adjustable modulation sources, VCO 2 with 3 mixable waveforms (sawtooth triangle and suboctave) and two adjustable modulation sources, Low pass filter...

(3)
Recently Viewed
iZotope Music Maker's Bundle

iZotope Music Maker's Bundle (ESD); Plugin-Bundle; contains eight essential tools for audio editing and creative music production; consists of BreakTweaker Exp, Stutter Edit, Trash 2, Iris 2, Elements Suite (Nectar Elements, Neutron Elements, Ozone Elements und RX Elements); supported formats...

Recently Viewed
K&M 80310

K&M 80310 disinfectant stand with bracket; bottle holder dimensions: 102 x 91 mm; base diameter: 275 mm; drip cup can be removed for cleaning; with bracket to fix the disinfectant bottle ; round base; weight: 3,6 kg; colour: pure white;...

Recently Viewed
Rode Wireless GO White

Rode Wireless GO White; Digital Wireless Microphone System; ultra-compact and lightweight set of transmitter and receiver; series III 2.4 GHz digital transmission; clip-on transmitter TX with built-in microphone (omni capsule); maximum SPL: 100 dB; Frequency Range: 50 Hz – 20...

Recently Viewed
Rode Lavalier GO White

Rode Lavalier GO White; Lavalier Microphone; pairs perfectly with Røde Wireless GO (item 463781); works with most other devices with a 3.5mm TRS microphone input; compatible with most laptops, DSLR cameras, mobile recorders etc.; broadcast grade omnidirectional condensor capsule; Frequency...

(1)
Recently Viewed
Presonus ioStation 24c

Audio Interface and Controller 2 x 2 USB 2.0 (USB C) recording interface with 24-bit / 192 kHz, 2 x Mic / Line / Instrument XLR combo input jacks, 2 x Line output 6.3 mm jack symmetrical, Stereo headphone...

(1)
Recently Viewed
Mackie CR3-X

Multimedia Monitors Equipped with a 3" woofer and a 0.75" tweeter, Power: 50 W, Frequency range: 80 - 20,000 Hz (-3 dB), Housing: MDF, Power supply: 100 - 240 V AC, 50/60 Hz, Dimensions (W x H x D):...

(1)
Recently Viewed
Behringer Eurorack Go

Behringer Eurorack Go; Eurorack case; two rows with 140 HP each, build-in busboard with 32 headers for Eurorack modules;, vertical positioning possible via integrated tilt stand; 96 sliding nuts (M3) pre-installed; maximum module depth: 40mm (lower row), 62mm (upper row);...

Recently Viewed
FabFilter Saturn 2

FabFilter Saturn 2 (ESD); multiband distortion plugin; variable distortion and saturation effect with up to 6 frequency bands, with optional linear phase processing; 28 different distortion styles, from subtle analog saturation to brute digital; adjustable slope for the crossovers, offering...

Recently Viewed
Saramonic Blink 500 B4

Saramonic Blink 500 B4; Ultracompact 2.4GHz Dual-Channel Wireless Microphone System with 2 transmitter and Lavalier for Apple iPhone and iPad that provides broadcast-quality sound; The RXDi battery-free MFi certified Lightning receiver is extremely lightweight, space efficient and works perfectly when...

Give Feedback
Feedback Found an error or want to give us feedback about this page?

We're looking forward to hearing from you and aim to solve any problems as soon as we can.