Doepfer A-180-2 Vintage Edition
Doepfer A-180-2 Vintage Edition, Multi-Connector, eight inter-connected sockets - can be split into two groups of four by disconnecting an internal solder bridge, to patch more inputs or outputs into any Module, Wide: 2TE, black Front Panel
Asiakkaiden arvioinnit samanlaisista tuotteista
Only negative thing that come to my mind is that it is hard to find silent 0 position. Maybe there should be dent that it would be easier to stop in the 0 point. Other than that it is well worth the money
Ok joystick considering the price
Nevertheless, if you're looking for a joystick for your modular and you don't want to pay 300 euros, which is the price of the most expensive modules, I highly recommend this one.
Doepfer A-180-2 Vintage Edition, Multi-Connector, eight inter-connected sockets - can be split into two groups of four by disconnecting an internal solder bridge, to patch more inputs or outputs...
Passive Multi-Port Distributor 8x Interconnected jacks, Sockets are divided into 2x quadruple groups; but can also be modified to an eight-multiple (soldering bridge on the circuit board), Width:...
Standard VCO for Modular System A-100Module A-110-1 (VCO) is a voltage controlled oscillator. The A-110-1 produces frequencies in a range of about 8 octaves, of which four waveforms are available...
Wasp Filter Special edition, Black front, Yellow knobs
ADSR Envelope Generator The module A-140 is a envelope generator and since it delivers control voltages, belongs to the modulation-modules. As soon as the ADSR is triggered at gate-input, it...
Doepfer A-138b - mixer with logarithmic potentiometers.
Doepfer A-180-3 Dual Buffered Multiples, dual buffered 1-in-3 multiple to copying/buffering of control and audio signals, Width: 4 TE / 4HP / 20.0 mm
Frequency divider For clock/trigger/gate signals, Width: 4 TE/ 4 HP / 20 mm
Doepfer A-199 Spring Reverb Module - electronically simulated by means of 3 spiral springs. Spring reverb systems have a very characteristic sound that is based on the (insufficient) mechanical...
Doepfer A-119 - external input/envelope follower; Width: 8HP / 40.3 mm; Depth: 45 mm (measured from the rear side of the front panel); Current: +30mA (+12V) / -20mA (-12V)
|Myynnissä vuodesta||huhtikuu 2016|
|tässä kategoriassa||Sijoitus 87|
|thomann.de sivuilla||Sijoitus 16611|