Avenger A5029 Roller 29 Low Base

Rollable tripod

  • With braked rollers
  • Top mounting: 16 mm (5/8") pin
  • Minimum height: 125 cm
  • Maximum height: 290 cm
  • Transport height: 123 cm
  • Maximum payload: 12 kg
  • Maximum diameter of footprint: 100 cm
  • Diameter of the central columns: 25, 30 and 35 mm
  • Size of the support leg: 20 x 20 mm
  • Weight: 5.7 kg

Further Information

Type de pied Light stand
Support Spigot 16 mm (5/8")
Incl. Bar No
Crank No
Height (m) 1,25 m – 2,90 m
Max Load (kg) 12,0 kg

These are other customers' choices:

Customers who looked at this item have bought these:

Avenger A5029 Roller 29 Low Base
38% bought this exact product
Avenger A5029 Roller 29 Low Base
Available immediately
Available immediately

This item is in stock and can be dispatched immediately.

Standard Delivery Times
222 € Add to Basket
Avenger A5033 Roller 33 Folding Base
7% bought Avenger A5033 Roller 33 Folding Base 238 €
Avenger A5036CS Roller 36 Low Base
7% bought Avenger A5036CS Roller 36 Low Base 333 €
Avenger A5012 Roller 12 Folding Base
6% bought Avenger A5012 Roller 12 Folding Base 222 €
Avenger A2030DKIT C-Stand Kit 30
6% bought Avenger A2030DKIT C-Stand Kit 30 205 €
Our most popular Lighting Stands
7 Customer Ratings
  • 5
  • 4
  • 3
  • 2
  • 1
5 /5
  • quality
  • stability
  • handling
Total
quality
stability
handling
Excellent rolling stand - So much easier to use in a studio setting than standard light stands!
El Trotamundo, 12.04.2021
I purchased this along with a Avenger D520 40" Extension Arm to extend umbrellas and softboxes overhead while shooting with Profoto gear. This roller is heavy duty and very stable. It rolls easily and is perfect for my studio setup. It is a bit heavy for on location shoots so I'll use it mostly indoors.

The wider stance gives it greater stability over the A5033 but doesn't reach quite as high. It is not really a problem since I'm using the extension arm. Combined with the arm I can extend a 7ft umbrella with diffuser panel directly overhead to replicate soft outdoor lighting. Highly Recommended.
Helpful · Not helpful · Report
Report rating…

Do you believe this rating to be inaccurate or unacceptable for some reason?

Send report
de Original review (Show translation)
Unfortunately there was an error. Please try again later.
Total
quality
stability
handling
Stabiles Stativ
ABAMBO, 23.10.2020
Ich habe einen Lichtgalgen mit Gegengewicht, welcher auf einem stabilen Stativ aber ohne Rollen installiert war. Nach mehren Photoshoots merkte ich, dass es mühselig ist, den Galgen in Position zu bringen. Also suchte ich nach einer alternativen und fand dieses Stativ. Insgesamt wirkt das Stativ sehr robust und massiv . Die Segmente haben allerdings keine Luftfederung, was ich aber glaube verschmerzen zu können. In Stabilität ist es meinem feststehenden ebenbürtig, wegen der Rollen aber leicht zu positionieren. Die Rollen lassen sich feststellen, so dass es im Betrieb aber auch präzise positioniert werden kann und dann unbeweglich bleibt.
Die Rollen muss man zuerst montieren, entsprechendes Werkzeug sollte man also bei Hand haben. Einziger Kritikpunkt: Die Gebrauchsanweisung und Montageanleitung fehlte. Für die meisten wird das sicherlich zu verschmerzen sein.
Helpful · Not helpful · Report
Report rating…

Do you believe this rating to be inaccurate or unacceptable for some reason?

Send report
de Original review (Show translation)
Unfortunately there was an error. Please try again later.
Total
quality
stability
handling
Top
Elkie, 16.11.2020
Extrem leichtläufig und stabil.
Helpful · Not helpful · Report
Report rating…

Do you believe this rating to be inaccurate or unacceptable for some reason?

Send report
de Original review (Show translation)
Unfortunately there was an error. Please try again later.
Total
quality
stability
handling
Erster Eindruck sehr gut!!!
TLAV, 24.08.2020
Ohne Langzeiterfahrung macht die Verarbeitung einen sehr robusten, langlebigen und wertigen Eindruck! Keine Druckfedern im Rohr verarbeitet! Räder werden seperat zum Montieren geliefert! Angemessenes Preis/Leistung Verhältnis aus meiner Sicht!
Helpful · Not helpful · Report
Report rating…

Do you believe this rating to be inaccurate or unacceptable for some reason?

Send report
Show variations of this product
Avenger A5029 Roller 29 Low Base
(7)
Avenger A5029 Roller 29 Low Base
to the product
222 €

Rollable tripod With braked rollers, Top mounting: 16 mm (5/8") pin, Minimum height: 125 cm, Maximum height: 290 cm, Transport height: 123 cm, Maximum payload: 12 kg, Maximum diameter of footprint:...

Avenger A5036CS Roller 36 Low Base
(5)
Avenger A5036CS Roller 36 Low Base
to the product
333 €

Light Stand with Low Base Castors with brakes, Made of chrome-plated steel, Upper attachment: 28 mm (1 1/8") receiver for TV spigot and 16 mm (5/8") spigot, Min. height: 156 cm, Max. height: 360...

Avenger A5033 Roller 33 Folding Base
(3)
Avenger A5033 Roller 33 Folding Base
to the product
238 €

Lighting Stand With braked wheels and collapsible base, 4 Sections / 3 extracts, Riser pipes made of aluminium with diameters: 35, 30, 25, 20 mm, Collapsible steel feet, Max. load capacity: 12 kg,...

Avenger A5042CS Roller 42 Low Base
Avenger A5042CS Roller 42 Low Base
to the product
377 €

Light Stand with Low Base Castors with brakes, Made of chrome-plated steel, Upper attachment: 28 mm (1 1/8") receiver for TV spigot and 16 mm (5/8") spigot, Min. height: 166 cm, Max. height: 420...

Avenger A5012 Roller 12 Folding Base
(2)
Avenger A5012 Roller 12 Folding Base
to the product
222 €

Stand with Braked Wheels and Foldable Base 3 Sections / 2 extracts, Aluminium risers with diameter: 45 / 40 / 30 mm, Collapsible steel feet, Max. load capacity: 25 kg, Height when closed: 68 cm,...

Avenger A5017 Roller 17 Folding Base
Avenger A5017 Roller 17 Folding Base
to the product
214 €

Stand with Braked Castors and Folding Base 3 Sections / 3 risers, Riser tubes made from aluminium with diameter: 35 / 30 / 25 mm, Collapsible steel feet, Max. carrying capacity: 12 kg, Closed...

222 €
Free shipping incl. VAT
Available immediately
Available immediately

This item is in stock and can be dispatched immediately.

Standard Delivery Times

Dispatch expected by Friday, 7.05.

Share This Product
Your Contacts
Phone: +49-9546-9223-45
FAX: +49-9546-9223-443
2
(2)
Recently Viewed
MOTU UltraLite mk5

USB 2.0 Audio Interface With USB C connector, ESS Sabre32 Ultra DAC technology, 24 Bit / 44.1 - 192 kHz, Precise level meters for all analogue inputs/outputs with high-resolution OLED display, 2 Microphone / line / Hi-Z inputs via…

Recently Viewed
Line6 Relay G10TII Transmitter

Line6 Relay G10TII Transmiiter, 2,4 GHz plug and play Wireless transmitter for Relay G10 systems or Spider V series from Spider V 60, with internal receiver, audio frequency range 10 - 20.000 Hz, automic frequency setup, 118 dB SPL max.,…

Recently Viewed
Roli Lumi 1 Snapcase Black

Roli Lumi 1 Snapcase Black; sturdy and magnetic cover around the LUMI Keys for a slim and seamless fit; protects the LUMI Keys during transport and storage; easily folds into a stand for mobile devices; dimensions (W x D x…

1
(1)
Recently Viewed
Behringer S&H / Random Voltage 1036

Behringer S&H / Random Voltage 1036; Eurorack module; dual Sample & Hold /Random Voltage; internal clock adjustable from 0.03 - 300Hz; manual sample button; clock FM input with attenuator; signal input with attenuator; internal random generator with attenuator; channel A…

1
(1)
Recently Viewed
Otamatone Neo Black

Otamatone Neo, Electronic sound toy / synthesizer, standard size, selection of various sounds via new studio smart phone app, cross link of smart phone and Otamatone via cable, power plug for external power supply, stereo headphone jack, volume adjustable, playing…

Recently Viewed
Arturia Pigments 3

Arturia Pigments 3 (ESD); virtual synthesizer; four sound engines with variable sound sources; Harmonic Engine with up to 512 partials; Wavetable Engine with a total of 164 wavetables; Utility Engine with sub-oscillator and two noise sample layers; Jup-8 V4 low-pass…

Recently Viewed
Line6 Pod GO Wireless

Line6 Pod GO Wireless; Multi Effects Pedal for Electric Guitar; over 300 effects and models from Helix, M-Series and Legacy products, up to 6 simultaneous amp, cab, and effects models including a looper and a speaker cabinet simulation (Third-Party IR…

2
(2)
Recently Viewed
Harley Benton AirBorne Go

Harley Benton AirBorne Go, hd modeling desktop guitar amplifier with built-in 2,4ghz wireless instrument system, bluetooth 4,2 dual mode connectivity, airborne go app for advanced tone editing, drum machine, transmitter(battery) can be charged via the usb-port of the amp, great…

Recently Viewed
Fender FA-15 3/4 Acoustic Steelguitar

Fender FA-15 3/4 Acoustic Steel Guitar; Acoustic Steel Guitar, 3/4 Size; Laminated Agathis Top; X-Bracing; Sapele Back and Sides; Neck Nato; C-Shape; Fretboard and Bridge Walnut; 18 Frets; nut width 1.69" (43 mm); Finish Natural; incl. Gig Bag

4
(4)
Recently Viewed
Harley Benton AirBorne Pro 5.8Ghz Instrument

Harley Benton AirBorne 5.8Ghz Pro Instrument, 5,8GHz digital wireless instrument system; suitable for all instruments with 6,35mm audio jack; plug-n-play transmitter & receiver; 5,8GHz band (5.729~5.820GHz); 24 bit/48KHz; 4 channels; transmission range up to 35 meter; latency 5,6ms; battery…

1
(1)
Recently Viewed
Doepfer A-138n VE

Doepfer A-138n VE; Eurorack module; Vintage Edition with black front panel; compact 4-channel mixer; works for CV and audio signals; level control per channel; 4x signal input; 2x mix output; power consumption: 10mA (+12V) / 10mA (-12V); width: 4 HP;…

Recently Viewed
Solid Gold FX Imperial MKII Fuzz

Solid Gold FX Imperial MKII Fuzz; Effects Pedal for Electric Guitar; Gated-Fuzz pedal, based on the vintage JEN Jumbo Fuzz; retro-themed design with sliders; preamp built around a modern J-FET circuit, for enhanced clarity and response; Controls: Vol, Tone, Contour,…

Give Feedback
Feedback Found an error or want to give us feedback about this page?

We're looking forward to hearing from you and aim to solve any problems as soon as we can.