Millenium SR-2024

156

Professional 19" Studio Rack

  • Material: Steel
  • With reels
  • Solid construction
  • Format: 19"/24U
  • Load bearing capacity up to 80 kg
  • Height: 120 cm
  • Installation depth: 40 cm
  • Width of bottom plate: 56 cm
  • Weight: 31 kg
  • Colour: Black
  • Incl. heavy duty brackets for mounting from both sides to the centre rails of inner walls
disponibil din Noiembrie 1999
numărul articolului 129419
unitate de vânzare 1 bucată(ăţi)
usable height in U 24 U
Material Steel
Wheels Yes
Special Design Studio Rack up to 80 kg load
829 lei
Include TVA la care se adaugă 89 lei costul de transport
în stoc
în stoc

Acest produs e disponibil în stoc și poate fi expediat imediat.

Informații despre livrare
Livrare aprox. între Vineri, 22.03. și Luni, 25.03.
1

156 Evaluările clienților

4.1 / 5

Pentru a evalua produse trebuie să fiţi logat.

Reţineţi: Pentru a preveni evaluările bazate pe zvonuri sau reclame ascunse permitem doar evaluări de lşa clienţii noştri reali, şi care au cumpărat echipamente de la noi.

După logare veţi găsi de asemenea toate articolele care pot fi evaluate Centrul Logare Clienţi.

Stabilitate

Măiestrie

88 Recenzii

google translate gb
Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.
A
Pretty good for the price.
Anonim 20.07.2014
Bought this mainly as storage for expanding rack equipment collection.
Ended up being used for holding a couple of home studio rigs.

Good points are it's solid once you get some gear in it, there are some rails down the centre inside where you could place supports (provided in the package) for any deep rack gear.

I've owned this since 07.09.2013.
Upon delivery it must have been dropped somewhere as the top most hole on one side for the cage nuts was damaged and took some serious bending to get a cage nut to fit it. This didn't really affect the stability or product in any major way.

The castors provided are ok, I found last month that one of them had broken/bent which meant that it would lean. Not a huge problem sice you get castors and static feet for it also. Probable reason it broke was because I keep a gator 8u rack on top of it, which only holds 5 u worth of gear 2x2u and 1 1u piece.
Still if you're using short depth rack gear you could fill both sides of the unit which would be similar in weight. I did expect a bit more from the castors.
When it broke, I just stuck adhesive felt on the bottom of the static feet and it was good to go, however much more immobile.

This thing is HEAVY, I mean really heavy, once assembled it's incredibly difficult to lift (hence the castors).
There's plenty room down the sides of your gear to run cables and power supplies.
Also looks like holes for doors that could be fitted drilled into the top and bottom (door not supplied, or at least mine didn't come with one).

In the pack there are 2 square bits - top and bottom, 2 large rectangles.. The side which are pre loaded with rack strip for M3 (I think) cage nuts (the square ones that you have to insert yourself.
4 static feet, 4 castors
A bag of cage nuts and bolts
A pack of supports for the central strip on each side with nuts and bots to tighten, as well as a hex key tool.
Also supplied are the obvious bolts required to assemble and hex key tool to fit it all. Came with some nice rubberised grommets to fill the holes were the boots go to give a nicer asthetic look.

The central support fits the little supports nicely as once is loosely assembled then you can slot it down and tighten it up.

Rated 4 overall, mainly due to the castor issue which in turn affected the stability.
Couldn't rate the product itself down for the damage during transport as it was smal and just about fixable.

Probably a 2 man job to assemble.
Stabilitate
Măiestrie
8
0
semnaleaza un abuz

semnaleaza un abuz

google translate gb
Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.
M
Needs to be filled to make it stable
Mik-303 08.12.2020
I've had multiple of these racks in different sizes and I've never let down by them. To my taste it's stylish and also very usable product for a good price. These things will last for a very long time in normal use. Just make sure to order some cage nuts and screws to go with it. I reduced one star because of the fact that it needs to be filled with rack gear to make it stable. I give it 4/5 stars.
Stabilitate
Măiestrie
1
0
semnaleaza un abuz

semnaleaza un abuz

google translate gb
Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.
B
Sollid but could use few mm extra width.
Bjørn 15.04.2020
Well packed with double carton, it arrived undammaged. Assembling was straight forward, and I did not experience any problems with any of the supplied accessories. No bent nuts as mentioned in an earlier review neither. Fully utalized it is slightly overloaded, but seems to handle the extra weight well. I'll point out thar the rack is used in fixed installation, only to be moved a few feets for behind access.
So far, the only cons I fint worth mentioning is the racks width, which, in case being 19", is pretty tight 19". A few extra mm otside the railing would definately make mounting of equipment much easier.
Stabilitate
Măiestrie
1
0
semnaleaza un abuz

semnaleaza un abuz

google translate gb
Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.
A
Millenium SR-2024
Anonim 18.09.2014
Too high! Yes, it has space to pile up a load of mods.
It needs extra support to make it steady. It is very waggly.
You need to check the connections time to time so your mods don't fall off.
You need to twist it a bit to get the mods installed.

Ugly but works ok.
Stabilitate
Măiestrie
3
0
semnaleaza un abuz

semnaleaza un abuz