Kovax KCR400 Sel-Adhesive Sandpaper

13

Self-Adhesive Sandpaper

  • Suitable for use with HOSCO H-SB sanding blocks
  • Grit size: 400
  • Width: 64 mm
  • Length: 3.4 m
disponibil din Ianuarie 2021
numărul articolului 511195
unitate de vânzare 1 bucată(ăţi)
48 lei
Include TVA la care se adaugă 89 lei costul de transport
în stoc
în stoc

Acest produs e disponibil în stoc și poate fi expediat imediat.

Informații despre livrare
Livrare aprox. între Joi, 30.05. și Vineri, 31.05.
1

13 Evaluările clienților

4.6 / 5

Pentru a evalua produse trebuie să fiţi logat.

Reţineţi: Pentru a preveni evaluările bazate pe zvonuri sau reclame ascunse permitem doar evaluări de lşa clienţii noştri reali, şi care au cumpărat echipamente de la noi.

După logare veţi găsi de asemenea toate articolele care pot fi evaluate Centrul Logare Clienţi.

Măiestrie

6 Recenzii

google translate gb
Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.
T
Good quality for wood, NOT for metal!!!!
TrEr 07.06.2021
In Thomann's product description of the corresponding sanding blocks this sandpaper is recommended for fret leveling. Unfortunately this sandpaper is very poor for metal frets. It clogs up and gets dull almost immediately. I also tested it for polishing frets after leveling/crowing with the same poor result. Any decent quality sandpaper from your local hardware store will probably do a better job with frets.

It works great when used on wood though and it's a perfect fit for radius sanding blocks. I've leveled several fretboards using this sandpaper with excellent results.

Recommended for wood/fingerboards. Not recommended for frets.
Măiestrie
1
0
semnaleaza un abuz

semnaleaza un abuz

google translate gb
Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.
i
Fret leveling
io74 13.04.2023
Used it for leveling the frets of a brand new strat that was must have skipped the ordinary quality control for the neck. I decided not to return the guitar just because i loved the finishing and the sound of the pickups. Attached to a sanding block of the appropriate radius, the paper did its job just great.
Of course fret polishing was required after that, but that's another story.
Măiestrie
0
0
semnaleaza un abuz

semnaleaza un abuz